Liczymy pasujące modele…
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print upright on bed for best strength and accuracy, put the arrow marker at the top. I added a single support for the bottom tab that sticks out, and a brim for good adhesion. Otherwise, standard PLA works well for snapping onto a…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Straight track rail from Lego City Train set Print instructions This print requires supports
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…
Wydruk około 5,15 €–6,30 € nettoWstępna wycena jednego wariantu
Train station model created in Fusion 360 from a project foundable on http://www.smpd.cz/olympia/projekt.html Print instructions For easy printing, model is sliced to 4 parts which can be easily glued together.
Wydruk około 15,76 €–19,26 € nettoWstępna wycena jednego wariantu
Easy to print, tought and compact construction. Need a little of support (just for hook - don't use support for holes). (it's the same as https://www.thingiverse.com/thing:3371739 ) Category: Construction Toys
Wydruk około 2,37 €–2,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've build a toy train (BRIO / IKEA compatible) that I've made for my son. This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Earlier this year I got into growing sprouts. While living in my dorm room at college, I wanted a more convenient way to strain the water from the mason jar and came up with this print. It's a meshed strainer lid for wide mouth or regular…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 2023: Bought an MT8 and added a fitting for it here. --- You want to customize your Magura MT5/MT7/MT8/MT Trail Calipers without spending a fortune on those expensive plastic rings? Look no further, this model has you covered.…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Just a simple wheel stopper Print instructions 0.3mm layer height (or more if your printer can) PETG, ABS or any outdoor resistant filament Fusion 360 file included
Wydruk około 22,99 €–28,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[ENG] Miniature truck with tanker trailer and spare wheels printed in one piece without supports. The model can be printed either as a whole - tractor with semi-trailer connected (it is possible to disconnect it after printing), or the…
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Added a 60° tail to the MK4 version of the strain relief. Made some additional cosmetic tweaks to the original files. Model is backwards compatible with MK3/S/S+ heatbed. Print per Prusa recommended settings. Update 10/6/23: The …btm.stl…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ce croisement de voies avec aiguillages est conçu pour un encombrement réduit. Encombrement total largeur 23cm longueur 46cm avec entraxe 16cm. En sortie d'aiguillage j'utilise des courbes de rayons différents 40 et 48cm Il nécessite 2…
Wydruk około 3,94 €–4,81 € nettoWstępna wycena jednego wariantu
A small collection of tracks I modeled as a present. They should fit an Thomas the Tank engine track set but I've only tested it on one. Includes: 1 straight section 1 flex section 2 three way forks 1 intersection Print instructions For…
Wydruk około 8,53 €–10,43 € nettoWstępna wycena jednego wariantu
Protects your ear from high strain by rubber strips. It's a remix of www.thingiverse.com/thing:4256347 It's improved by additional holes allowing to protect the rubber strip from falling off. 5x on MINI 8x on MK3s Print instructions 0.25…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
With the holidays coming up, almost two-thirds of American households will be using green-beans in their winter holiday celebrations (source: YouGov survey). Even more will use some form of canned vegetable (source: YouGov survey +…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Passage à niveau multi-pièces. Pour emboiter la rampe sur les bandes (queue d'aronde) je place l'ensemble dans un étau. Bonne impression
Wydruk około 3,94 €–4,82 € nettoWstępna wycena jednego wariantu
When children begin to ride their own bike, they sometimes get tired quite unexpectedly during cycling tours or walks. Therefore you need to have a possibility to transport their bike when they change into the trailer. So I made these…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🚝Customizable Alphabet Train🚝 Nozzle 0.4mm Print 0.2mm Infill 15% Support ❌ Brim ❌ Here are all our plans, take a look. Qui ci sono tutti i nostri progetti, dacci un occhiata. 📃→ ALL COLLECTIONS info: 👤Account link to share it=…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
Simple print in place bobbycar trailer splint to prevent the trailer from disconnecting. No tools needed, only print them out and break the connection line between splint and secure bolt. Usage : Attach the splint, move the hinge, done.…
Wydruk około 0,73 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Butterfly knife blade (Butterfly Comb / Balisong Comb)
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Track piece to extend this circuit. Short and medium rail have the same length that original parts. Half short is, as it sound, half the size of the short one. It usefull to fill gap in some cases. Print instruction: Supports needed for…
Wydruk około 4,68 €–5,71 € nettoWstępna wycena jednego wariantu
Bookmark for How to train your dragon fans, it has the strike class logo on it which is the class Toothless is in
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Needs support to Print!!
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
This is a straight edged version of the Butterfly router template. I included the F3D file so you can scale it to whatever size you need. The inner butterflies of the template are included and are sized .1mm smaller for tolerance. Makes…
Wydruk około 4,60 €–5,63 € nettoWstępna wycena jednego wariantu
Conversion of hand version of plasma torch. JDM garage plasma or other compatible.Holes for magnetic breakout mount. STL files printable ond standart size printer 210x210 base plate space.Includes two alternatives in .stp files and Prusa…
Wydruk około 7,56 €–9,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Double-sided mini straight rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
See https://www.printables.com/model/67141-ar-15-trailer-hitch-cover-mk-2 for a newer, simpler version of this design. I don't recommend this one. The technological gimmickry was fun, but it has too many problems, and is too fragile. The…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Norfolk Southern diesel locomotive toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Remixed the Mandalorian trailer ball cover to fit into a 2" receiver hitch since I don't like leaving my hitch in all the time. Printed with gray PLA, and colored the middle in with a few coats of black sharpie, turned out pretty nice.…
Wydruk około 15,26 €–18,65 € nettoWstępna wycena jednego wariantu
With the addition of the E-3D Buggy benchmark print, it only made sense to make it work with a Benchy. Now you can bring your Benchy along for the ride with your E-3D Buggy boat trailer just like Dad and Grandpa used to do. How to print:…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Turntable for wooden train tracks. It consists of a basic element into which a small turntable is inserted. The parts are connected by a screw and nut of M3 type with a length of 12 mm.
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
Updated May 6, 2024: Further simplified print. Now uses the Floating Holes Trick to eliminate the printed “washer cover” part. Share your passion for shooting sports, without attracting unwanted attention from haters. Those who know what…
Wydruk około 4,84 €–5,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My wife says this is the most-used tool at her pottery studio! Just hold the tool and press it into your piece to straighten any wobbly or uneven rim. Can also be used to stabilize pieces while trimming. Printing Instructions: Just print…
Wydruk około 5,81 €–7,10 € nettoWstępna wycena jednego wariantu
I printed a couple of copies of @Adam 's most excellent rock scent-training capsule recently: https://www.printables.com/model/295199-scent-trainer-rock and was impressed with both the concept and execution. As an aside - I've also…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
I like this design. I wanted one for my garbage disposal side, but the dimensions were not right. I didn't want to scale it, so I created a Fusion 360 design using the eyeball method. The design (included) is set for 85mm diameter and…
Wydruk około 2,05 €–2,50 € nettoWstępna wycena jednego wariantu
I had previously re-mixed some dog scent training capsules that had a magnetic base - https://www.printables.com/model/936563-magnetic-dog-scent-training-capsule My daughter wanted to use the capsules with a cheap rubber safety non-slip…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
One engine plus five different train cars included in this simple print in place train set. All the cars print without supports with wheels and hooks that move right off the build plate. Examples printed at 0.2 mm layer height with 3…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
A support for the Ikea/Brio type train bridge. It will fit slightly larger than typical trains. If you like this model check out this collection of my other toy train models.
Wydruk około 6,25 €–7,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I couldn't find the full train set on Printables.com, so I thought I would upload it in case anyone wanted the full thing, but didn't want to use 3D Builder . Photo is taken from the above link, I am still printing my set.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Hello friends from all over the world :) This is my sink strainer / gully cover in the bathroom. The diameter of my sink is 40mm. If someone likes this Design, it would be great if you also give it a like and post a make ;) - - - - - - -…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
The track is compatible with wooden rails. It is also possible to connect the individual printed tracks to each other.
Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu
Meatlug : How to Train Your Dragon
Wydruk około 8,86 €–10,83 € nettoWstępna wycena jednego wariantu
If you want to practice throwing cards, then this is the best thing you can print, the plastic is much stronger than your ordinary playing cards and will not get destroyed as quickly. Its the best solution in my opinion to learn how to…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Design Description: Sink Drain Filter This design is a specially crafted sink drain filter aimed at enhancing the cleanliness and functionality of sink drains. Compared to traditional sink drains, it is more efficient and user-friendly.…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Double-sided double long-length straight rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track…
Wydruk około 6,21 €–7,59 € nettoWstępna wycena jednego wariantu
Respiratory Muscle Trainers (RMTs) are proven to be useful in improving the condition of patients after breathing-related conditions like COVID-19 or COPD. These RMT devices are neither well-available nor affordable in most Low- and…
Wydruk około 3,74 €–4,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
The Earthrise Optimus Prime figure itself is at the quality of the Master Pice figures. but the trailer is not as great. more of a nice addon to the package. so like a few others have done we made our own designed to make the trailer…
Wydruk około 3,93 €–4,81 € nettoWstępna wycena jednego wariantu
To increase yields and flowering, young shoots on plants should be brought into a horizontal position in July-August before they harden. This is very easy to do with this clip and is much easier than tying or weighting. The horizontal…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you’ve lost or broken the original light mount (Thule part no. 1500055273), this 3D-printed part restores the ability to attach the LED rear light securely to your child trailer. It clips onto the rear frame bar and holds the light…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Elevate your GraviTrax Junior vibes with this compatible 3D-printed straight! Will require supports and some minor cleanup work. Disclaimer: Only works with GraviTrax Junior!
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Simple strainer for washing fruits and vegetables
Wydruk około 11,43 €–13,97 € nettoWstępna wycena jednego wariantu
SEE IT IN ACTION! FEATURES This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
This is a 1/2 standard height bridge for wooden/Brio trains. It can be printed on a Prusa Mini sized print bed and is a gradual enough slope that the trains shouldn't bottom out. Using the included piers, these can be paired to make a…
Wydruk około 13,84 €–16,92 € nettoWstępna wycena jednego wariantu
Díl spojuje dřevěnou vláčkodráhu a LEGO DUPLO. Přidává možnost postavit nádraží nebo tunel The piece combines a wooden train track and LEGO DUPLO. Adds the ability to build a station or a tunnel.
Wydruk około 3,58 €–4,38 € nettoWstępna wycena jednego wariantu
The railroad crossing is build up by 5 parts to get a smooth surface for the road. To connect the parts of the inner and the outer curve, I have designed a dovetail guide. The parts was assembled in a vice to avoid tilting, but it should…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
Two color print. Designed for 2 inch receivers. Scale as needed to fit other sizes.
Wydruk około 6,17 €–7,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits to MK3/MK4 bed when placed diagonally.
Wydruk około 7,58 €–9,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple connector for a firmer connection between two tracks. It helps keep the railway together, preventing it from easily coming apart during play.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Use this bracket to stretch your bedsheet. Just buy a 2 cm wide rubber band, fold it, push it through the hole, make a loop and secure it with a wedge. Do that at the both ends. The rest is easy, just put the insert from the opposite side…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bit of a mash up I was already using the X-axis cable strain relief clip, so I incorporated geektoybox’s C270 webcam mount. Perfect for spaghetti detective or general nozzle/print checking. Added an extra 10mm offset towards the rear to…
Wydruk około 0,99 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Found the original design, but needed large quantity in short order with non-screw option. Found 0.2mm speed in mk3s+ triple 25m, dual 18m, single 11m. Normally print entire bed full without issue. Use cheap hairspray for adhesion.…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This model captures the iconic likeness of cricket legend Virat Kohli, blending realistic features with a smooth, stylized finish. Generated using advanced AI-sculpting tools and refined for 3D printing, this bust is designed to be a…
Wydruk około 4,17 €–5,09 € nettoWstępna wycena jednego wariantu
This is a model I remixed from Cults3D. Original link to model by @LetsPrintIt is here. Original model file: https://cults3d.com/en/3d-model/tool/tanto-practice-knife Creator's page: https://cults3d.com/en/users/letsprintit/3d-models I…
Wydruk około 8,57 €–10,48 € nettoWstępna wycena jednego wariantu
Print as shown in screen shots with flat (non-track) side down to plate.
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
Coal Car toy train (BRIO / IKEA compatible) A big thank you to SCHWEINERT.COM Without your fantastic Locomotives and Tanker Car, I would not have been inspired to design this Coal Car. No train is complete without Coal Cars and Box Cars.…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Originally AI generated and cleaned/modified heavily to look like an actual print and be able to be printable. It is a take on the original mini fig of Skrill from How to Train Your Dragon. I've printed it with an Ender 3 V3 SE using…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
My Print Parameters: Resolution: 0.2 Nozzle: 0.4 Seam position: Aligned Infill: 15% Top Layers: 6 Bottom Layers: 5 Perimeters: 2 Rafts: No Supports: No Material: PETG Prusament Signal White/Lipstick Red, Urban Grey Happy printing!
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple gender changer for wooden train tracks (e.g. Brio brand)
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Lego City Curved Rail Normal Radius 40 studs new version Radius 56 studs for bigger curves Print instructions Printer Prusa XL Multihead Filament: PLA Print height: 0.2mm Nozzle: 0.4mm Support: Are needed at the ends
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
This is two different trailer covers for the Landy Mini Long Trailer, one flat and one tall.
Wydruk około 1,69 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
CZ korba je mix toho co se mi líbilo a co bylo funkční, par nápadu třeba jako rezervy z boku napadlo mého tátu když jsme se o tom bavili, nápad to byl dobry. No ale i tak to není replika ničeho, nebo tak nenasel jsem nic co by takto…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
Tiny train token : FDM firendly No support Sequential printing to avoid strings
Wydruk około 1,63 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you found that the strainer doesn't fit completely with the drain (too small), please print along with the sleeve and put it on the outside of the strainer for better fit. They were successfully printed with PLA. I recommend not…
Wydruk około 1,22 €–1,50 € nettoWstępna wycena jednego wariantu
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
Wydruk około 4,38 €–5,36 € nettoWstępna wycena jednego wariantu
This large-scale ornamental dragon collar, in conjunction with my other model, Spiked Dragon Chain (Ornamental) , makes up a large scale halloween decoration. As described, this collar will not truly restrain your dragon, it is only…
Wydruk około 2,37 €–2,89 € nettoWstępna wycena jednego wariantu
I designed an axle and bearing to be able to mount the wheels and interface with the bogie sides. I also designed a connecting rod to attach the bogie centre hub with the bogie frame. To mount the wheel on the axle you need to local sand…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
So I made the trailer hitch for model 13 - winch truck from 3DSets. You can use my MINI/MK3 plates or provided STL’s. Just keep in mind, that the "Model 13_Trailer hitch_01 STL doesn’t have holes in the whole distance so you need to add…
Wydruk około 0,85 €–1,03 € nettoWstępna wycena jednego wariantu
This is a remix of antagonizerr US, Canada, Scotland Trailer Hitch Covers - Remix This remix allows you to change out and customize the covers. This fits 2" x 2" hitch receivers. (Class II) Printed with Creality CR-10 0.6 mm nozzle PLA…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
nemohu najít zde stránku ze které jsem si stáhl stl. napište mi do zprávy pokud víte stránku děkuji samozřejmě pak tuto smažu I'm looking for the author of the model, I can't find the page from which I downloaded the stl here, thanks for…
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
Simple three bearing wire straightener. Hook the offending copper zap-snake under the front bearing, over the middle one, and under the third. Stroke it. Stroke it good. There, now it's straight. I printed mine in petg, 5 perimeters all…
Wydruk około 2,24 €–2,74 € nettoWstępna wycena jednego wariantu
Model je navržen tak, aby byl snadno tisknutelný. Podpěry bude vyžadovat jen lucerna, “sklíčka” i tělo návěstidla jsou tisknutelné bez podpěr. K dispozici je i verze jednostranného návěstidla. Rovněž se snadno sestaví bez lepení. Sklíčka…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Idee: In unserer Dummy-Trainingsgruppe werden an einem normalen Trainingstag etwa 40 Dummys von 8 Besitzern verwendet. Am Ende werden die dann untereinander wieder getauscht. Das dauert sehr lange, daher wurde eine farbliche…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Kids safe, training, self defense push dagger
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
3D-printable training chopsticks that work. See it on Youtube. Clever folks have been inventing learner chopsticks to help teach their use, since the dawn of chopsticks. None has managed to teach the Standard Grip. Most of these teach…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Slicing Files are uploaded in .3mf for multibody function. Included are also .3mf PrusaSlicer projects with added Fuzzy skin settings. How to apply Fuzzy skin (for Prusa Slicer at least): When opening, select Yes in “multi-part object…
Wydruk około 11,66 €–14,25 € nettoWstępna wycena jednego wariantu
A friend asked if I could make a replacement for the head restraint adjustment button for his Skoda Octavia Mk3 Estate (original was lost or broken). An hour or two with calipers and FreeCAD later (and a couple of hours printing and then…
Wydruk około 1,12 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For Nissan X-Trail (2003-2007): bonnet support clip (mounting using a screw and nut M4) držák vzpěry kapoty motoru (uchycení pomocí šroubu a matice M4)
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hockey Trainer Bridge One Piece to print on larger print bed One piece remix of Steven Quinn's Hockey Trainer Bridge
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I currently moonlight design for a company called Sub 0 Angling. they make hand crafted custom ice fishing rods and gear. I was playing around with some ideas and threw this together. If you are into ice fishing or angling of any kind…
Wydruk około 14,09 €–17,22 € nettoWstępna wycena jednego wariantu
See also the new version with air vents . As I didn't really liked the original housing of the CV-Programmer by mXion, I just created an alternative. To prevent the electronic board from moving inside, I suggest to add a small…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
I like the way it looks with both the long ones and the dot at the end, but if you just want to stop the ringing, you only need to use one (1) of the long ones. I don't own any other squid balis, so I don't know if it's compatible with…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena jednego wariantu
Training Wheel Replacement with 10.4mm shaft diameter. Based off of gigi78's Training Wheel. Changed the inner diameter to fit a different diameter.
Wydruk około 4,10 €–5,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print using filament or resin. For FDM, use a 0.25 mm nozzle with a layer height of 0.05 mm. Then glue the two parts together, followed by the legs. UPDATE 11/18/2025: I modified the de-icer legs to simplify gluing. Instead of gluing four…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
Replacement strainer base for bilge pump used in boats. Recommending to print in PETG and with 30% infill. I used " The Filament ReFill PETG 1.75mm MACHINERY ORANGE 1kg (PETG, 1.75 mm, 1000 g, Orange) " with quite good results.
Wydruk około 1,78 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Deutsch Als Neuling bei der Freiwilligen Feuerwehr wollte ich etwas, um leichter Knoten zu lernen. Natürlich ersetzt dieses Werkzeug nicht das Üben mit den echten Geräten, aber es erlaubt es, Knoten während der Theorieschulung und zuhause…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
This simple tool prevents the towel from falling off your dishwasher handle while drying.
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
