45 modeli
Inspired by the PS5 Controller, this grip is super comfortable and fairly easy to take on and off. Print in a more flexible and fatigue resistant material such as PETG, Nylon, etc. as the top clip needs to flex to take on and off the…
BUY THIS PRINTED DIRECTLY FROM MY ETSY HERE Super easy print - just print on the flat side down! Use 2 pieces of 1mm thick jewelry felt lining on the left and right insides of the case to make the device snug, plus another piece on the…
I did not design this. I found it a few weeks ago but could no longer locate the source page when trying to share site with friend. So I'm sharing.
UPDATE 3: Added a version of the battery door/kickstand that holds two micro sd cards. Also added a “Magne'nt” to help hold the door shut if you don't use magnets. It's a work in progress, feel free to leave feedback. UPDATE 2: Added a…
Magnetic case for the TRIMUI Smart Pro You can print this without any overhangs or special settings! The real work is in the assembly. Use a piece of 1.75 mm filament as the hinge. Cut the filament at the end of the hinge and superglue or…
Basic display stand to hold the TrimUI Brick upright at a slight angle. Wider Version has been uploaded. The colored Brick models seemed to have a bit larger of a tolerance on size and were a bit snug in the original design. The added…
Just started fiddling with my Brick and decided to make a simple clip on screen shield. It doesn't do much for ergonomics while playing, but doesn't get in the way, either. Prints quickly, only uses 12g of filament, and make the console a…
Reference model for the TRIMUI Smart Pro. Keep in mind that this does not include the shoulder buttons, but everything else is included and relatively accurate. Enjoy making accessories for the Smart Pro!
Settings don't really matter, just print with DRY TPU to prevent stringing and use your printer's recommended TPU Settings (low volumetric flow rate). The only settings I changed were to use snug supports with a 25 overhang to ensure the…
Trimui Model S / Powkiddy A66 cap to enhance your d-pad experience ! If you are used to Gameboy and other similar "rolling" d-pad device, you may have notice false inputs using this device as the d-pad lay on a all-flexible support and…
A print in place slip cover that snugly protects your Trimui Brick. I printed this on both a Bambu P1S and A1 Mini with 0.4mm nozzle. This is my first attempt at a print in place model, so the tolerances are tight. I had to press firmly…
A simple case for the Trimui Brick. Print with the back down and use tree supports. Available in both hexagon textured back and smooth. Enjoy! 20250331 - Added a “Smoother” that removes the design elements/textures on the back and sides.
Backplate for Trimui Model S / Powkiddy A66 with extended space for a 523450 Li-Po battery. WARNING : Opening, modifying your handheld may void your warranty. I will take no responsability if you break something. To do this mod you will…
Update: Added version with slightly larger magnet holes I designed a magnetic case for the Trimui Brick handheld console, complete with a set of handy features: Utilizes the foam insert that comes with the Trimui Brick Slots for 5x2mm…
chopped up Rhith08's excellent TrimUI Brick Display Stand in BambuStudio to fashion it into a cradle mount for a Skadis pegboard.
I've printed them upside down to get a nice matte texture, but either should work. 15% Infill is plenty, you can probably go even lower.
This is a sakdis mount for TrimUI Smart Pro
I was surprised by how tiny the TrimUI Brick is. Since the case for it hasn’t arrived yet, I made my own retro-style case. It feels almost like a real cassette box, just a bit bulkier. The open/close sound is also similar. PETG is…
Minimalistic casing for Powkiddy A66 / Trimui Model S handheld console. Slide your console in, toss in a pocket, slide it out to play. Enjoy scratchless transparent shell aesthetic a little longer ! You should print it in TPU or any other…
A simple protective case for the TrimUI Model S (also known as the Powkiddy A66). It features a secure latch with an opposing “thumb tab” to help with opening, and a charge-thru cutout so you can charge the handheld while it's in the…
I wanted black buttons for my red Trimui Brick but didn't want to purchase a black Trimui Brick, nor did any of the Etsy sellers have the color or style I wanted. So I spent some time modelling up the face buttons, printing them out,…
This model is obsolete, here is a link to the V2 model that adds quality-of-life improvements and addresses a big flaw with the latches. Ignore this model and print the V2 design model instead! ---------- A protective travel case for the…
I couldn't find a charging dock for the TrimUI Smart Pro so I decided to whip one up in TinkerCad. I designed it to work with a magnetic charger so that the USB C connecter is always kept in the device and it simply magnetically connects…
Remixed to angle the console so you can play with the console while it is charging
An ergo grip for the TrimUI brick.
Slim grip case for the TrimUI Brick Features raised pockets so the screen and buttons do not touch a hard surface at all holes to see the top led bar and charge while the Brick is in the case snap on hinge with no extra part needed slim…
I love my friends, okay, I love them. However, They saw how much I enjoyed using my Miyoo Mini and thought, the birthday present EddieCoast needs right now is another handhed emulator in the exact same form factor with slighly more…
This is a stand/dock for the Trimui Smart Pro. Ready to print right away, no scaling or editing needed. Please do let me know if there's any fault or some new features I could add to this model. Thank You!
Magnetic TrimUi Brick Hard Case Created this case so i can chuck the console in my bag without worrying about scratches or it getting crushed.…
A simple stand for the TRIMUI Smart Pro. It includes a small nub that utilizes the 3.5 mm headphone jack to keep the device centered in the stand.
I've been using my TrimUI Brick GripCase for several months, and after all that time, I decided to slightly update my design to offer some quality of life changes: Changed the orientation of the Brick when using “case mode” so you can see…
Here you can find dock charger for your TRIMUI BRICK. To work you have to buy USB-C cable with correct size of plug and cable diameter up to 3,2mm. In files you can find 2 versions of dock for plug 5,7 x 10,2 mm for plug 5,7 x 10,6 mm…
I wanted to see if I could design a one-piece, gripcase for my TrimUI Brick. Works pretty decent accepting any suggestions for improvement. Inspired by Joshua C's " Miyoo Mini Gripcase (Original, not PLUS)" Features: one piece design;…
Simple holder to hold the TrimUI Brick on a 1" spaced pegboard
A simple 3D-printable front cover for the TrimUI Brick Pro. It covers the screen and face buttons while leaving openings for the thumbsticks. Choose from a plain finish or three retro-inspired engravings: Pixel, Arcade and Press Start.…
I wanted a stand to hold my Trimui Brick on my IKEA Skadis pegboard. I wanted to be able to charge it too so it has a cutout to allow the charge cable to come in. I gave it a good amount of tolerances all around and I used a little cork…
A simple 2 part 3D-printable front cover for the TrimUI Brick Pro. The face plate covers the screen and face buttons while leaving openings for the thumbsticks. The clip locks the case in place and covers the power button. Print the face…
Desk charging dock designed for the Trimui Smart Pro (and potentially the new Trimui Smart Pro S / TG5050 , though unverified). Designed to keep the handheld at a comfortable viewing angle on your desk while charging, with a cable routing…
Remixed two different cases to make a hinged brick pro case with latch. I use the "small screw" model (print 6) to hold it all together. Works quite well and looks kinda awesome IMO =P
A reversible grip/screen cover for the TrimUI Brick & Brick Hammer shaped and textured like a Game Boy Color. This one is pretty slim but I'm happy to make a chunkier version if that's something someone wants. There's a 62mm x 50 mm…
Update: Added version with slightly larger magnet holes I designed a magnetic case for the Trimui Brick handheld console, complete with a set of handy features: Utilizes the foam insert that comes with the Trimui Brick Slots for 5x2mm…
A simple stand for the TRIMUI Smart Pro. It includes a small nub that utilizes the 3.5 mm headphone jack to keep the device centered in the stand.
A simple protective case for the TrimUI Model S (also known as the Powkiddy A66). It features a secure latch with an opposing “thumb tab” to help with opening, and a charge-thru cutout so you can charge the handheld while it's in the…
This model is obsolete, here is a link to the V2 model that adds quality-of-life improvements and addresses a big flaw with the latches. Ignore this model and print the V2 design model instead! ---------- A protective travel case for the…
An ergonomic grip for the TrimUI Smart Pro. I have not tested it with the Pro S. I expect it to fit, but it may cover the vent on the back.
