1717 modeli
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
You can show off your love for Peeps and add some Easter flair to your hoodie drawstrings! They make a perfect gift for your co-workers! Print a pair in every color! Print one pair in 30 minutes and uses under 5 grams of filament! They…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Guitar string winder drill bit (standard 1/4 inch) for use with accu drills / screwdrivers. The included f3d file uses user parameters if you need to adjust anything.
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
A replacement for a common type of ball-shaped, spring-loaded stopper, for tightening drawstrings on clothes, bags, etc. You'll need: 1x print included “Body” model 1x print included “Plunger” model 1x spring +-11mm long, +-7.5mm outer…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Be sure to upload makes!
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Next time the drawstring comes out of your garment, instead of struggling to get it back in, print this model and easily fead it back through (almost like a giant needle!). This is very fast to print and uses very little filament. This…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is a model of Luz's Palisman Stringbean from The Owl House with a collapsing staff. It is 83mm wide, 183mm long and 268mm tall. With the staff fully extended, it is about 1.4m tall. This remix is based on Stringbean Palisman - The…
Wydruk około 3,25 €–3,98 € nettoWstępna wycena jednego wariantu
[EN] A simple tool to change strings faster and more comfortable on my electric guitar. It's designed to fit Fender Hardware, I could not test it with other Hardware yet. The crank is print in place with no supports. You can also use a…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Prusament PLA Galaxy Purple Fillamentum PLA Crystal Clear Smaragd Green Height: 270mm Staff Inset Diameter: 35mm Scale Accordingly No Supports Required Printed with 5% Infill
Wydruk około 4,13 €–5,05 € nettoWstępna wycena jednego wariantu
UPDATE 22.2.2022: added lock with honeycomb protection agains fingers (kids friendly) - inspiration here Info: just like original (thanks for upload Mikolas Zuza!) added eyelet , so it can hang somewhere (like your neck for example) kids…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
Klíč k napínání strun při jejich výměně. Makes the job of changing strings easy. I added a little glue to make it strong
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
This is a remix of a string art design by 3DPrintBunny ; I have added the base with spiral pattern and hanging ‘notch’ on the back. I am including all files. However, I strongly recommend you do not change any print settings. They are 3D…
Wydruk około 6,25 €–7,64 € nettoWstępna wycena jednego wariantu
These are the details for perfect stringing models- Layer Height- 0.15mm First Layer height- 0.2mm Retraction distance - 8mm Retraction Speed - 30mm/s Print speed - up to 130mm/s
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Print in place Droid that moves when you pull the bottom “zipper” This model prints in place and no assembly is required. You can also do a simple color change in a certain height to get a visually interesting effect and nice contrast.…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
A rather spectacular string-art star that may require some patience to get your settings dialled in, but is a pretty amazing print to behold when you are in The Zone. To help you get in The Zone I have included a single-layer…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
A string winder for my basses/guitars, 100% fill, printed with PETG and Prusa slicer. It can also be used with an electric screwdriver.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remake of my 3 string instrument called the Triotune. It is very similar to a soprano ukulele, minus one string. This is designed to be modular, so you can swap out parts to fit your needs. There are three necks to choose from…
Wydruk około 18,50 €–22,61 € nettoWstępna wycena jednego wariantu
This is the ultimate stringing test V4.3, along with stringing it also tests for warping. It has poles of various lengths with diameter difference at the top and bottom. It is a very hard challange for a printer to complete but I have…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
This generator will make all common size elastic threaders (also known as tape threaders and bodkins). It will also make a drawstring threader for round cord. How to use the Generator You may customize just about every dimension to create…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A perfect model to test your printers ability to properly retract filament, and test its bridging capabilities. This is done with two small towers either side causing the printer to have to travel across the middle on each layer. If the…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Update 2: Added multiple width files! print in 4mm, 6mm, or 8mm (or even 2mm but i havent tested this skinny yet) Update 1: Added a slot to put in a PET plastic protector. Just cut a piece of plastic from the bottle part you chopped off…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
Design is at the end of video
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this model to secure our Philips Hue Festavia string lights to the top of our terrace fence. The top of the fence has the following dimensions: H: 4 cm (1.5748 in), W: 2.9 cm (1.14173 in). The fence also has a small 2mm indentation…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
With this sturdy and versatile mount, you can easily hang string lights for a warm, inviting atmosphere. Perfect for restaurants, patios, or home decor, these mounts keep your string lights securely in place while allowing for…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Print, plug, and play! It’s a good idea to start with the test print first to check if the lights fit properly. Material: PETG Size: 230x200x6mm Twinkly: Strings Multicolor / 600
Wydruk około 8,80 €–10,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
držiak pre strunu
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple string art model to display on your desk. This is an 80mm x 80mm x 20mm circle with delicate strings. The strings form a curve on on side with a good amount of negative space. There are two versions, one with and one without a…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
I use r0tring isograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…
If you like these maybe you also like my Stringart Stars or the bigger Stringart Flower
The Eiffel Tower showed up with some stringing. This Test Model is intended to vary parameters Print instructions PLA Prusament 0,15 Standard Quality Mode
Print at 0.3mm layer height. Print without supports. You should be able to see the strings in your slicer preview If using Bambu Studio make sure your wall generator is set to Arachne. See a video of the artwork here:…
I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.
Hello fellow nerfers! This is SKLEP mk1, my free time project I've been working on for the past month. This is a single firing string blaster that uses (and ejects) Flypoint/ Kirin shells. It fires half length darts. You can still use it…
Cute skull drawstring beads for your clothes.No glue needed, just slide them up the drawstring. Easy to print! Only 2g filament per set! Three sizes available (diameter of the hole): 4mm 6mm 8mm 4mm and 6mm are properly the most common…
Everyone's favorite low poly skull beads! Properly test-printed and optimized for the best results. Hole size is 3, 5, 7, and 9mm. Print settings: Filament: PLA Nozzle: 0.25, 0.4mm Layer height: 0.10 - 0.20mm Support Type: Organic (Tree)…
If you've ever needed to re-thread a drawstring for a hoodie, you know it can be tricky. After struggling with this once I designed these drawstring threader needles to make the process much easier. Simply pass the end of the string…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
Activate firmware retraction in your slicer. Activate firmware retraction in klipper by adding this to you printer.cfg : [firmware_retraction] retract_length: 0.8 retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 Slice the…
A fragmented skull suspended in a string frame. Print at 0.24mm layer height without supports If using Bambu Studio make sure your wall generator is set to Arachne If using Cura make sure 'print thin walls' is checked. If you want to…
For STL user : You can print in full but to reduce support cut at horizontal below the stand with a support blocker on the stand side starting at 2mm (full plate) Experience the thrill of aviation with this meticulously crafted model of…
No fancy settings, simple design. You can Support me by making a small donation: https://www.paypal.me/sharad1209
This test part is optimized so that you can print it quickly to achieve many iterations in a short period of time without wasting too much filament.
Stringing Test für PETG mit unterschiedlichen Temperaturen. Von unten 260°C bis 235°C
Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…
Very good string test. It does not have problems with slicing it in Prusaslicer anymore.
File for testing retraction
This is a very long snake (over a meter long), which has a small hole in the head to insert fishing line through. I personally use this as a cat toy, but it could be used to scare some friends! In the pictures, the model is scaled down to…
petit test pour le stringing Print Settings Printer: Alfawise U30 Rafts: No Category: 3D Printing Tests
I designed a 3D printable string action gauge/ruler that can be used to measure the string action on a guitar or ukulele. It features measurements in both millimeters and fractions of an inch. It can be optionally printed in two colours…
New Dual Colour version! I recently redesigned the text label to make the most of owning a multi colour printer. This prints well on a 0.4mm nozzle, just make sure you have good 1st layer adhesion. Set of 5 common radius, and some less…
Introduction A multifunctional tool that allows the following 4 main functions for use in the workshop: 1: Protractor, measurement and drawing of angles. (0 to 180 degrees)*. Debossed legends are included to indicate the angle#. Radial…
A String Biplane model with spinning propellor and wheels. Print the Biplane file at 0.3mm layer height and if using Bambu Studio make sure your wall generator is set to Arachne. All parts are printed without supports I found a brim…
Remix to fit my EGO string trimmer better. The original mount worked well for a trimmer that had a round shoulder, but this fits better with trimmers that have a rounded off square shoulder.
Read the guide on stringing and oozing: https://help.prusa3d.com/en/article/stringing-and-oozing_1805 Test different retraction lenghts and temperature settings. About 8 minutes print time.
Heart suspended in strings artwork. Single and dual colour versions available Print at 0.2mm layer height If using Bambu Studio make sure your wall generator is set to Arachne. See a video: https://vimeo.com/860773935?share=copy
The Modular Fiddle is a platform for violin-family instruments. I make professional quality electric violins using the Modular Fiddle platform. The files listed here make the latest-and-greatest 4-string acoustic Modular Fiddle. V4 is the…
For handing your Milwaukee Quik-Lok string trimmer head. Print at .15-.2 mm and mount to wall.
Another stringing test, prints fast, requires little filament. Prints in 10-15 minutes.
A Star Wars String Artwork. Print at 0.3mm layer height without supports. Set wall generator to Arachne if using Bambu Studio)
NOTE: The STL of this model is free for non-commercial use - you are free to print as many as you want for yourself or friends, so long as there is no monetary exchange. Feel free to use this model as a basis for remixes to make grips of…
Updated to change print orientation along the diagonal axis and extend diagonal brace into holder cup for greater strength. Can also be printed along top axis with some support. Also fits EGO Power+ Powerhead PH1400 Printed 0.4 nozzle, 4…
Printed on my MK3S with a 0.4mm nozzle. I used the 0.3mm draft profile, the only changes I made were to check ‘detect thin walls’ and to change ‘seam position’ to rear. If when you slice the vase with the above settings it says there are…
Have you ever accidentally pulled the drawstring out of your favorite pajama pants? Trying to push a floppy string back through a long fabric channel just so you can keep your pajamas tight along your body can be incredibly frustrating.…
VANOCE | String Art Flat Ball, Christmas Tree The flat string art ball from my collection of Christmas Tree decorations . It prints 100% without supports , despite the strings floating in mid-air. Just make sure to check the recommended…
String art featuring an Icelandic horse. Print at 0.3mm layer height without supports. If you are using Prusaslicer check the 'detect thin walls' box and make sure the 'wipe while retracting' is unchecked in your printer settings.…
Circle String Art Print at 0.3mm layer height. If you are using Bambu Studio set wall generator to Arachne You should be able to see the strings in your slicer preview
MODEL DETAILS This Valentine's Day-themed model doubles as a stress test for your 3D Printer. If you liked this model, why not try our other stress tests too? Warning: This is meant to be extremely difficult. Keep an eye on your printer…
Guitar string winder tool. fit with bearing 608 without any tools. Manivelle pour mécanique de guitare se monte avec un roulement 608 sans aucun outil.
The Centring Square is an essential tool for precision work. It helps you easily find the center of round diameters – perfect for drilling, marking, or alignment tasks. Why choose this tool? ✔ Always useful in the workshop and for 3D…
A twisty string decorative vase Print at 0.3mm layer height without supports If using Bambu Studio check that wall generator is set to Arachne.
S.I.M.P. is a fully 3d printable Half Dart stringer pistol with an internal magazine that requires no extra hardware other than the elastic string. This Blasters fps will depend on the elastic put in it but it should have the fps as a…
I've messed around with a new cad/modelling software and just ended up with a pistol somehow… Hardware needed: A bit of 4mm bungee and maybe some tape for the bungee where it interfaces with the lever to avoid too much flex Assembly, put…
*** Updated version with additional bracing for stability *** I had good success with my steel string guitar , but it required a huge printer. For folks wanting a more manageably sized project, I decided to try a mandolin instead. The…
Improves grip on string launcher handle. Can pull the loop or just hold as normal with some more surface area. Snaps on and off if needed. Let me know your thoughts or suggestions!
Beads for hoodie strings with Celtic symbols and a 5mm hole for the string to thread through. I printed them in black PLA and then used metallic Sharpie pens to colour the top and bottom. A small tree support was used for the top of the…
A small but effective Stringing test
J'ai eu besoin de changer toutes les cordes de ma guitare, et je me suis dit que c'était le moment de dessiner ma propre Manivelle pour tendre les cordes de guitare. Je me suis inspiré d'un modèle Dunlop adapté à mon besoin. Il ne…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Hardware requirement: #4 x 0.375in Thread-Forming Flat Head Screw, QTY 9 Two sections of 4mm elastic string Talon Magazine spring Secure the Magholder with one #4…
INFO: Instructions available as a PDF in the attached files. -------------------------------------------------------------------------------------------------------------------------------- Hello hello Nerfers! The Silica-5 is a massive…
A model of the golden gate bridge in San Francisco How to make: Print all STL files twice in the orientation provided, or print the objects in the .3mf file twice to get all parts. Connect the two roads with two pieces of filament (about…
This model is of a balloon dog I made but I've shrank it to mini size and added a perfectly fitted hole for a drawstring. The hole will fit any drawstring that has the plastic tip 4mm or smaller. 0.2mm layer height 10-15% gyroid infill…
Cute dog paw print bead for shoe lace or draw string Bead Size: 20mm x 28mm x 7mm Bead hole: 4mm Printed with PLA with no supports
Problem bei Wohnmobilen ist oft der sehr langsame Abfluss von Wasser in Spülen, Waschbecken etc. Es gibt dafür mittlerweile von einem Hersteller bzw. mehreren Lieferanten dafür einen Luftring zu kaufen, über den zusätzlich Luft in den…
Simple retraction and stringing test for your printer. Every step can be used to indicate when and what settings have been changed with a script you added and help you find the correct value. Can be scaled up, down, be printed with…
Tips are appreciated and go towards creating new designs Changelog: 2021-12-21: Added experimental male-male axis connector for use with an (experimental) separator for creating multi-spools 2022-05-07: Added a winding aid. Use an M6 bolt…
Follow us on Instagram: https://www.instagram.com/sektor7_studios_3d/ Hello everyone :) Attention MERCEDES-BENZ fans. I have designed a very cool string art stand with MERCEDES-BENZ LOGO for you. Both the stand and the Venom string art…
use a .2 mm layer height I also recommend scaling it up about 10 to 20%
Follow us on Instagram: https://www.instagram.com/sektor7_studios_3d/ Hello everyone :) Attention Marvel fans . I have designed a very cool string art stand with Venom for you. Both the stand and the Venom string art are very easy to…
For STL user : You can print in full but to reduce support cut at horizontal below the stand with a support blocker on the stand side starting at 2mm (full plate) Experience the thrill of aviation with this meticulously crafted model of…
This is just a tiny and simple stringer to put anywhere on your blaster to fire at roughly 60 fps, so nothing to write home about but probably highly useful for close quarters games against shields or special targets that require mega…
Pokeball jewellery Multimaterial
A nice sculpture of DNA Strings, and a nice challenge to print right. Enjoy! Show your makes please!
![Golden Gate Bridge [String Art]](https://media.printables.com/media/prints/573999/images/4590471_3f637853-6699-498b-9021-24fb5d417009/1693931560144.jpg)
