39 modeli
These are plastic inserts for your cardboard tokens, compatible with the 2021 version of Tyrants of the Underdark.
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
This is a remix of the Samak figure from dutchmogul's The Curse of Moht . I like the more assassin-y look, since that's what I'm doing with my spies most of the time anyway. I scaled it down and changed the base to better match the…
Since the new version of Tyrants doesn't include the 4 cardboard inner circles. I decided to print my own. These are designed to be printed 2-tone if you want. If you already have the cardboard ones, maybe you can use them as coasters for…
You need to print player_tray and player_cards 4 times and minions six times. This insert is for second edition (square box). If you looking for first edition check out this design . Do you like my design? You can buy me a coffee :)…
All the organizers for the second edition of Tyrants are designed around the cardboard tokens. I wanted something that would work with 3D printed upgrades. These trays have been designed to be used with the following components: Troop…
I couldn't find a complete set of summons for the Beast Tyrant so I created it from various models I found around the interwebs, with some smaller or larger modifications. I also fixed a few errors in those models by running them through…
A simpler and more imposing throne for a famous robot tyrant. I stretched the original model to make the seat a bit longer, and shortened it a bit for the slightly shorter figure I had in mind. Then applied a much larger logo as the…
Monster from Doom Eternal. Modular kit.
This is a remix of the “Dodgy Too Many Bones and Undertow Character Case” by tpancoast found on thingiverse: https://www.thingiverse.com/thing:3985965 After printing the excelent Dodgy Too Many Bones Character Cases, I wanted some Tyrant…
X gon' give it to ya. Feel the relentless dread of being pursued with this massive figurine of the T-103 Tyrant, known to fans as Mr. X. Dropped into the R.P.D. with a single objective, this B.O.W. is the epitome of an unstoppable force.…
T-103s possessed intelligence close to that of normal humans, and could follow orders impossible for more primitive BOWs. Consequently, the T-103 models were used as bodyguards, assassins sent to hunt specific individuals, Umbrella agents…
V1.1 : made the round token holder slightly larger (1 token wasn't fitting properly) and reduced the Gem boxes by same margin.
Behold the pinnacle of Umbrella's T-Virus research: the T-002 Tyrant. This massive, intimidating figurine captures the final boss of the original Resident Evil in all its terrifying glory. From its towering physique and pulsating, exposed…
Boss monster from the horror-themed, now barely functional MMORPG Requiem: Bloodymare / Memento Mori / whatever. Blender is able to import animation files for most models from this game, so different poses are possible if there is demand…
Added additional Boxes to hold additional Rage of Tyranny content for Tyrants 3 Dice Box for Drellen Double Chip 3 Dice for Barnacle Double Chip 4 Dice for Nom Slightly deeper box for the Goblin Queen and her Loot cards
Insert for the Tyrants of the Underdark boardgame. While I like the plastic insert, it didn't fit sleeved cards and once you added the expansions, it became a tight fit. In this, all the cards will be in their own individual boxes (except…
The organizer is designed for a box of the second edition (square). It includes boxes for 6 standard faction decks and 2-3 fan decks. All card boxes are made taking into account the use of sleeved with a standard density of 60 microns.…
Remix of the Box Lid for Brendans Too Many Bones Tyrant Boxes that allows for more information to be shown.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Split for a build plate that is 220 mm wide
This is my Pie-Tyrant model made for a Patreon of #MZ4250 who requested it on the Discord server. This model is free to use for everyone. If you like it and/or would like to help me keep up my cafeën addiction. Please consider a donation…
🔥 Pyroclast Tyrant Large Elemental, Neutral Evil Armor Class 19 (molten stone plating) Hit Points 248 (21d10 + 126) Speed 40 ft., burrow 20 ft. STR DEX CON INT WIS CHA 26 (+8) 12 (+1) 23 (+6) 10 (+0) 14 (+2) 16 (+3) Saving Throws Str +12,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
As usual, I created this set because I needed something that would work both as an organizer and as practical containers for use during gameplay. I wanted each box to be functional—not just for storage, but also for smooth access while…
A modified version of the "Disorganized Tyrant of Disease" by Emang. This guy has had his diseased iconography removed and has been reposed to look more like a "guard at ease". This is a Undivided Chaos Guard/Hero/Lord standing "at ease"…
When I printed the Tyrant trays and lids from the original designer, I found them to be too loose as they slid open on their own if the tray was tilted. This could very well be due to discrepancies in printer profiles and calibrations.…
This Tyrant insert works with windowed tin containers measuring 100 x 70 x 20 mm / 3.9 x 2.8 x 0.8 inch (L x W x H) You can find them in several places and are either coated in black, silver or gold. There is a shallow window top that…
A Swiss Tyrant. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toy & Game Accessories
clips to hold a headlamp in place on the Giro Tyrant helmet (large size). Might also fit other sizes, not sure. Parameters in f3d file are adjustable to fit other sizes of headlamp straps.
UPDATED VERSION 2/3 Mount for Diatone Tyrant 630 ,540, and 530 with an angle of 25 deg. V1 its too bouncy/flexible!! / dont waste time and filament V2 is much better. More Gopro contact surface and more stable with almost same weight. V3…
NFStrike Accustrike Mega Darts ("Accufakes") are slightly bigger than standard Nerf Mega Darts and Buzz Bee XL Distance Darts and my Tyrant's breech would chew up and deform them instead of chambering them smoothly. So instead of…
GoPro Session 5 Mount For Diatone GT - Tyrant 530 35° Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 30 Filament: TPU TPU Black Category: R/C Vehicles
Diatone 530 GPS + SMA Mount. Category: R/C Vehicles
A Tyrant Jelly. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
This is part of my storage solution for Kingdom Death: Monster. The initial design idea was to store and organize all expansions in the original game box and only include the expansions for the active campaign in the Gambler's Chest box.…
A passion project of mine mainly focussed on reducing setup-time Pro's: + No longer need to place/sort the Info-Cards manually + Glyphid health can now be shown in a more 'structered' way + Most important info is still visible +…
Daily generative cat figurine #016. A consistent vinyl-style cat collectible with an original themed outfit, ready to print and paint. Style: vinyl-style ice villain cat. Size: 90 mm tall, round base. Slice with tree supports (auto) at…
# The Tiny Tyrant's Keyboard Tether A small clip-and-elastic solution for keeping a full-size keyboard attached to a very junior executive's chair instead of repeatedly introducing it to the floor. ## Design concept This started as a…
T-103s possessed intelligence close to that of normal humans, and could follow orders impossible for more primitive BOWs. Consequently, the T-103 models were used as bodyguards, assassins sent to hunt specific individuals, Umbrella agents…
