Surfcasting rod support / suporte de cana
For 30x30x2mm aluminum corner profile
Wydruk około 1,91 €–2,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 461
- Polubienia
- 19
- Ocena
- 0
Liczymy pasujące modele…
For 30x30x2mm aluminum corner profile
Wydruk około 1,91 €–2,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Creation of a 3D printed learning tool for an experiment with surface tension
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
A simple surface mount ATX PSU support frame. Works well with an EVGA 1000W PSU. Printed in PLA, more infill is better! 6x bolts (I think I used M6) required + ATX PSU mounting screws. Absolutely no warranty implied or given if you use…
German below. Easy and quick to print! This is my idea of a beautiful, small, stable, light and resource-saving glasses stand. The main idea is not new, but I haven't seen such a glasses stand with a structured surface yet. The surface…
My original Luba AWD was losing traction on my thick Saint Augustine grass so I designed these turf tires instead. I went through five different iterations and landed on this as the best design. I have been using them for over a year and…
Wydruk około 10,50 €–12,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a testprint for finding the best possible shine and surface quality for a filament. I found this to be especially important for silk filaments. Too small layers might not shine that well. The model can be used with temperature…
Wydruk około 2,78 €–3,40 € nettoWstępna wycena jednego wariantu
BYD Dolphin Surf (EU market) dashcam mount crafted for original BYD camera EL-3776900. Be extra careful when removing the right pillar-A cover. Don't use sharp tools. To access the glove compartment simply open it and push on the sides…
Wydruk około 6,05 €–7,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on toon Dodge A100 van "The Mystery Machine" from the Scooby Doo series. Modified version with surfboard and slammed wheels. Powered by small block V6. Parts are optimized for supportless print.(However, if you have problem with…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
I have found that the inside of my wetsuit boots struggle to dry without being propped open, which is difficult to do, especially when away. So, I quickly designed this! These are designed to go inside your wetsuit boots to keep them…
Idee: In unserer Dummy-Trainingsgruppe werden an einem normalen Trainingstag etwa 40 Dummys von 8 Besitzern verwendet. Am Ende werden die dann untereinander wieder getauscht. Das dauert sehr lange, daher wurde eine farbliche…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Just like the original model. print 2 The model is a snug fit around the adapter. Print Settings Printer Brand: Prusa MK3S+ Rafts: No Supports: No Resolution: .20 MM Speed Infill: 15% Material: Prusament ASA
Wydruk około 1,69 €–2,06 € nettoWstępna wycena jednego wariantu
100% infill 0.12mm layer height mandatory Make bed leveling before starting the print
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Universal Multi-Surface Mounting Plate for Kondor Blue What problem does it solve? This printed component solves the problem of flexibly and securely attaching camera accessories to a wide variety of surfaces, pipes, and even ceilings,…
How To 3D Print a Molecular Model of a Virus, A Tutorial Brew-Killer Virus (not the real name) L-A virus infects almost all laboratory strains of Baker's Yeast ( Saccharomyces cerevisia) and many wild strains. Once infected, yeast pass…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
My children love the small mole (Krtek ) and when my wife said we needed some coat hangers for our kids coats - i knew what to design :-) Made 2 versions - one with the bunny and one with the mole. I printed it with PLA and it holds the…
Printed on a XL, but could be divided into two parts and be printed separately. I sliced it with 0.15mm. I glued the strips on the laptop with strong double sided sticker tape (for phone screens).
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
This calibration test is designed to find the ideal ironing settings for achieving a smooth top surface when printing with a 3D printer. The model consists of a 10x10 array of flat cylinders. Along the X-axis, the ironing speed increases…
Our Father WHO are in heaven Cross 0.3mm layer high ,100% infill, 0.3/0.3/0.3mm walls
Yet another first layer calibration surface. Use it to get your Z level for the first layer right. Ooze free gcode!
A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…
found this kind of tool useful sanding rounded and several other shaped surfaces but wasn’t happy with the performance of similar things. what to know about this first I just designed versions around some short threaded inserts I had on…
Used the original model as a baseline for the normal fins - thanks for the design! (original model: https://www.thingiverse.com/thing:1324570) Reduced the size to match the fins i already have and increased thickness, because they seemed…
Version 2 now availiable!: https://www.printables.com/model/254313-finger-surfboard-car-window-finger-surfboard-flybo Have you ever put your arm out of you car window when driving fast in order to ride the waves? Now, you can take your…
Dies ist wie der Name schon sagt ein Auswurf Behälter für den Bambu Lab X1C/P1P/P1S
The main source page for this model is on GitHub. I provide it on Printables as well for your convenience, but the GitHub page may have more recent updates and more detailed instructions. Go to my site for an overview of my other models .…
Ideally, print the surfboard in two colors by changing the filament during printing. The finger holder is available in two sizes. You will then only need a piece of string, which you can finish with a lighter. Enjoy your aerial surfing.
This is the smaller and simpler design for the AirSurfer. This is the perfect toy to bring on a road trip. It is like a surfboard for your fingers, but instead of surfing on water, it surfs on the air passing by your car window. Make sure…
This is a remix of Andrei's Bag Clip (PRINT IN PLACE CAM). His print profile remains unchanged. This is to add more surface area to the lever to reduce failed prints. This is something I learned from Joel Telling's (3D Printing Nerd)…
Nice funny Air Surfboard :) I designed to Finger Positions for easier handling for Kids. Leave a like pls :)
Here is the Silver Surfer character from Marvel comics surfing in the air (not standing ;o) This model was made by Alex Lashko. I just converted the file to be printable. 2023-01-04 : Just posted a version with the board separated from…
I really liked the original model by @gdrag and the idea of @Lorro to use a wavy mesh. So I combined the two to get a smooth external surface with the wavy mesh. It prints faster avoiding retractions and with less vibrations. The bottom…
So here it is I was finally able to download it. everything should fit nice and snug if your printer is dialed in well. When you put the wheels on put the one wheel on one side then feed the axle through making sure you put glue inside…
Summary A finger surf board. The size without scaling is 140mm by 38mm and the inner is 1mm and the rim is 2mm and the hole is 3mm. With a little heat you can bend the front to look like a surf board. Original maker: xakerofxanthi…
Test to calculate the straightening speed on the Orca Slicer. With this test, you can calculate the straightening speed you need by adjusting the speed from 15 mm/s to 40 mm/s, and using different flow rates from 10% to 50%.Test to…
Smurf Cat. A request by a family member. I know zilch about this meme. So if its missing some details, and your in the know, let me know what it needs.
Re-upload of another cool moon surface plate that I found on Thingiverse Please attribute the original creator, not me.
Vacuum hose flanges to connect hoses of all common sizes to a flat surface. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 20mm long connector at each end 6 screw holes with 5mm diameter Wall thickness of…
Hi, here is best replica of broken head band for Surface Headphones 2 to the date. I tried several of existing i found out on the brode web but non of them was 1:1. This model having same thicknesses and same diameter as original. I am…
This is a model of a Gyroid Surface. What's a Gyroid? https://en.wikipedia.org/wiki/Gyroid "A gyroid is an infinitely connected triply periodic minimal surface discovered by Alan Schoen in 1970." Glad we cleared that up. To put it another…
Prototype plant holder, for above surface plants in an aquarium. I use wooden sticks to keep the plants in place until the roots have grown trough the holes. Might need drill holes trough the holder handle and put in plastic screws to…
When evaluating the surface finish of untested filaments, this test id for you. Especially when printing with matte materials, the flow (or in this case the speed) is defining the finish and how glossy/matte the surface will be. This test…
Just a simple (improved) rubber band powered boat. Small Rubber Band Boat: 15cm long, fits on printers 200x200cm or more Regular Rubber Band Boat: 22cm long, fits on printers 200x200cm or more Large Rubber Band Boat: 30cm long, fits on…
Overlay for the Behringer X-Touch universal control surface when used with the XR32 or XR32 rack mixer. The overlay is used to label the X-Touch buttons with their proper names when using the X-Touch with the Behringer XR32 mixer and…
Sada 5ks šmoulů udělejte si radost malými skřítky. Doporucuji smoulu s darkem seriznout zkriva. Nedrží rovnovahu I recommend that the bad luck with the gift be arranged crookedly. He doesn't keep his balance
Modified Orca Slicer settings for Snapmaker U1 printed with eSun PLA+ and PETG
I have created this small and quick print (20x20x1 mm) so you can quickly test the surface quality of your printer and calibrate accordingly. The model prints in under 10 minutes, and has a small wedge which you can use to easily pry it…
Slightly modified the bottom of the mount. Check out the original creator: https://www.thingiverse.com/thing:235874 visit my blog: http://www.maj.pavlin.si/ Category: DIY
Track your furry friend with ease using this collar/strap attachment designed to hold an Apple AirTag. The ergonomically rounded corners ensure that your pet won't experience any irritation, and the minimal profile prevents the attachment…
Version/Generation 2 of my Car Window Surfboard Project, FLYBOARD 2.0
Printed adapters for interfacing with the top of Dewalt toughsystem 2.0 boxes. Worksurface was cnc routed from ½" MDF by Sendcutsend.com (approximately $35 each at the time). Used these threaded inserts from the bottom side to attach…
I made my own air surfboards in Fusion for surfing the wind out of a car window. They can also be used as decorations, perfect for hanging from the rearview mirror of your VW Transporter or bug. you can also play with them in the bath :)…
Tiny, round, and ready to splash into your collection—Taki the turtle is the cutest aquatic buddy you’ll ever print. This shell-tastic companion is optimized for quick, no-support printing and comes in a clean monocolor version that…
A slice of lunar surface with craters, ridges and dust ripples across the top, a small astronaut figure standing near the edge, and a recessed well sized for a standard tealight. With a candle in it the crater walls throw long shadows…
surfboards - wall art, easy to print
Schlaubi Schlumpf Brainy Smurf Glasses Holder If you like it --> press like it :-) Remix of this model https://www.thingiverse.com/thing:3058136 which was designed by Sangallo_Designs . Optimized the mouth, the surface that it is more…
Simple yet very effective display stand for tech decks. Makes a great present. If you plan to hang it on the wall I recommend using 3m command strips. If you plan to stand it up I recommend adding a stop to the print script right before…
This bundle features an OpenSCAD app to generate 2D or 3D single or multiple hexagonal grids, a JSON preset file, reference and tutorial PDF documents, sample STL and SVG files and PrusaSlicer examples. With this, you can: Set up to 5…
created a remix so i can make a light box with an led strip, great for wall art etc
Cord Wrapper, Flat or Curved Surfaces, Variable Diameters 4-14 in (100-356 mm). Secures flat or round cord (.25 in/6.3 mm diameter or 5/16 in/7.2 mm). If this isn’t exactly what you’re looking for, check out my other design here that…
Inspired by the legendary puzzle game. Print instructions Layer height 0.2 mm No supports needed
Papa Smurf Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I am making a garage diorama 1:8 scale and needed a surfboard to add with the car. This is taken from "Spec Ops: The Line" as an OBJ file and converted and rescale to have a 7' board 1:8 scale. The board'd size is 28.8 cm so I put 2…
this is a handle i design is for big air and board spin. it for duotone.the distance between the holes is 18 cm
This model was originally intended to mount a surfboard on my wall for display. There may be any number of additional uses for it. I recommend 25% gyroid infill for adequate strength and stiffness. This creates a stiff print and is sturdy…
First layer test surface that uses the whole printbed 210x250mm with 0.2 mm height. Can be used to visualize warped / uneven printbeds. The included gcode has the ooze free startcode sequence. Happy printing! Print instructions Ooze free…
Stanley blade based surface scraper Uses 2x M3x12 and 2x M3 nut Designed so that if you use the flat of the 9 degree angle the blade will be juuuuuust above the surface Print instructions Category: 3D Printer Accessories
Das Frisbee ist sehr leicht und hat tolle Flugeigenschaften. Ich habe es so konstruiert, dass es auch von kleineren Kindern leicht geworfen werden kann. Beim Wurf muss die die Seite mit dem Rand (der Erhöhung) nach unten schaue. Somit…
Printed mine in PLA .4mm nozzle and .15mm layers, 15% infill. There are three different designs to choose (plus a blank template). More might come when the inspiration kicks but you can also easily create your own design using the…
Here is my Hanging small size Storage Bin project. Originally it was meant and made for Honeycomb wall, but it went much better in my opinion as it become more universal and now it can be mounted on Honeycomb wall as originally was…
Like my cows: https://www.printables.com/de/model/302165-cows-for-slopes-ramps-and-flat-surfaces-1-148 I now need sheep for my Thornycroft-JJ-type double deck cattle truck (I will upload separately). Since the sheep offered by model…
Container to fit a standard-sized Sex Wax Surf Wax (70mm diameter, 28mm height). You can remove the 62mm sticker from your Sex-Wax wrap and put it in the indentation of the top part :). If you don't have a sticker yourself, you can get…
Voronoi desktop coaster, 10 centimeters in diameter.
Print this and tie a leash to the hole. Surf the air out the window of your car with your fingers.
Creating a cattle body for my Thornycroft-PB-lorry I liked to have a cow walking in/out. There are a lot of cows available on the marked from different model railroad makers, but surprisingly all of them assume a flat surface, what would…
Needed a surface mount electrical outlet box to fit regular 110V outlets and shields into.
I designed this surfboard in Fusion 360, inspired by the Channel Islands Pod Mod. Included are individual files for small printers, or a complete file for larger printers. It's perfect for a wall display or as a functional surfboard after…
A butterfly to celebrate colour swaps, or use a dual-extrusion filament and have fun! The butterflies can be up sized or reduced in your slicer! Play with your X and Y! 💜🌟🦋 I love hearts and stars, a 90s kid vibe! 💜🌟🦋 Please share your…
https://www.cgtrader.com/body3d https://www.facebook.com/groups/492474174608397/ Join US ! Rejoignez nous ! Ceci est un test de pose sur Zbrush ! Category: Sculptures
Print with low layer height… Wax for size comparison, please rescale to your own convenience. I gave mine (printed in transparent PETG, 0.25 mm nozzle) a coating of white nail polish. Layer height could be lower in my case.
I designed this few years ago. The pillars in ct spawn were meant to be supports, but in hindsight they are unnecessary and too bulky. Original file is lost, only have the .stl
A surfboard for your fingers while driving. The board is my own. REMEMBER! DO NOT USE WHILE DRIVING AS A PASSENGER ONLY You need: -velcro -any string Thread the string through the eyelet in the board and create a Velcro piece that you can…
You might be able to print in an upright orientation if your printer is tuned. You'll likely need to add a brim for adhesion though. Only supports would be for the fin. Otherwise a raft at a slight angle works.
Schlumpf Gesäß Smurf Butt Glasses Holder If you like it --> press like it :-) Remix of this model https://www.thingiverse.com/thing:3058136 which was designed by Sangallo_Designs . The glasses holder is inspired by the movie “The Smurfs 3…
There are 2 versions of this model available for printing. A single piece model that can be printed vertically with supports required (see pictures), and a two piece version which can be printed with less height requirement and supports…
Easter decoration in the form of an Easter bunny and Easter eggs adapted for colour printing without MMU by changing the filament (colour) layer by layer using the M600 command. The model is dimensionally adapted for easy printing with a…
This time I decided to work not with the form or structure, but with the surface. It was important for me to find out how light is reflected and control its movement. To do this, I formed a surface from small pixels. Each flake is located…
You will need a string to tie the board to your fingers and sand paper for a better grip. Have fun! https://stllink.pages.dev/
I took Matt Germans beautiful Lord's Prayer art (https://www.printables.com/model/711044-ourfather-cross), added Jerry Lee's extended tabs (https://www.printables.com/model/722193-lords-prayer-cross-hanging-wall-art) and shortened them…
from https://www.thingiverse.com/thing:5650303
Marston mat was a landing material used in ww2 by Allied forces. The one in the file is 1:35 you can simply adjust the scale by multiplying the lenght by 35 and then divide it by your scale in Tinkercad or different
MGN9 Linear Rail ever so slightly sits in the v-slot of 20mm v-slot extrusions due to the chamfers. Common t-nuts can't clamp down on a 20mm v-slot rail enough and as a result the rail is not held 100% secure. Aditionally the chamfer on…
A small board designed to be printed as a keychain. Check out https://www.thingiverse.com/thing:2934781 for another SUP design. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
This is a model I made to mount an old Surface Pro 4 I had around to be a smart-home control tablet. It MAY fit other surface products but I have not tested them. It mounts to any wall using standard #6 screws. To place the screws…
If you like the model, you can support me by nominating my profile or this model. Thank you! Thank you for downloads, likes… Enjoy !