233 modeli
So that you can also see the flames from the addon Carnage at Devil's Run on the road. It took a few attempts to find the right size. For the cars, simply clip them on the roof and for the motorcycles, from the big rig and the final five…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein einfach Werkzeug zum Messen von Spiralen in einem Snackautomaten. Das lästige messen mittels eines Zollstocks o.ä. entfällt damit. Folgende Größen können damit gemessen werden: 11, 18,5, 25, 30, 35, 40, 45, 55, 65, 77, 80, 85, 95,…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
There are several ways to select the next section of the track in Thunder Road. I opted for this variant. These are road tiles to choose the next Route. Just put them in a bag, shuffle them and draw one. New Version V2!!! No support…
Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu
Lichtgevend jongens naam Isaac, Luminous boys name Isaac
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
There are several ways to select the next section of the track in Thunder Road. I opted for this variant. These are road tiles to choose the next Route. Just put them in a bag, shuffle them and draw one. No support needed Colour change at…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
100x160mm sign, reading “Strength Through unity” with a “V for Vendetta” V over strike. This is a 3 color, 3mm high sign. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm and…
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
Just for my booth tomorrow
Wydruk około 4,70 €–5,74 € nettoWstępna wycena jednego wariantu
LLAVERO - KEYCHAIN - VENDETTA
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
Rivendell has always been my favorite location in all of Tolkien's work, finally felt like the time to try modeling it and here are the results. Used the movie concept art as reference. I did two test prints, small resin one on the Elegoo…
This is a coin operated vending machine designed for fun-sized candy bars. It takes American quarters or the included discs of the correct size. Use the key to unlock to door on the back to restock the machine and access the coin drawer…
My new YouTube Channel: https://www.youtube.com/channel/UCnnw56J\_TeOsF4M\_F5pPPJQ Here is my Magnum Opus for the week! VEND is a totally 3D Printed candy dispenser that accepts quarters and rejects other coins. VIDEO:…
Open source 3D printed vending coin machine! This modular coin mechanism accepts a single 3D printed coin and allows a single rotation of the output shaft. This should be fairly tamper proof but you should still keep in mind the physical…
A couple of 1x1 impassable terrain pieces for print for Thunder Road: Vendetta. You can get the full set of the rocks on Etsy https://www.etsy.com/listing/1525041488/thunder-road-vendetta-impassable-terrain or Cults3D…
A design for a vending machine I made that accepts American quarters and dispenses cards in a card sleeve. There is a model to accept 1, 2, 3, or 4 quarters, although I think the 1 quarter model is the most reliable. Check the…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This model was designed to bring you this…
Description I present to you my slightly larger project. It is a simple mechanical vending machine. All parts except the coin selector are printed. In addition to the coin, it is also possible to use a token, which is also in the project.…
🎃 Happy Halloween!!! 🎃 From pop-culture fan Carlos Ramírez, aka kuma , here is a loved/dreaded location from the original Pokémon Red & Blue games for your enjoyment during this holiday spookseason! Lavender Town is a fictional village in…
Deckel für Standard Konservendosen, Druckempfehlung TPU da sehr Passgenau. Am besten mit Stützstruktur für den inneren Rand Drucken.
Updates These are the changes I made to the instructions: I changed the part numbering to match the part splits. I added some steps for the new parts needing glued together and pushing out the deliberate support in the mouth of the body.…
My friend showed me some pictures of things he wanted and I modelled these for him in Blender. The Gun turret main and sides need to be printed with supports. The Flamer Main also needs to be printed with supports. All the rest print…
This model isn't just a building, it’s an entire landscape. It showcases the iconic elements that make Rivendell a sanctuary for the weary traveller. Gothic elegance and intricate spans.
This is the model (from 3dsMax) for the new Nuka Cola vending machine in Fallout 4. I have uploaded this model on request - if you are going to build one by your own feel free to share the pictures! Print instructions Category: Video Games
Design by Sauron89 on 3D Warehouse Category: Buildings & Structures
This a model of a japanese distributer. There is a STL with all préassemble composant and there is all the composant if
This was designed specifically for the November ‘22 knob design contest. I tried to make the cabinet handle look like it could be a remnant from Elrond’s house, Rivendell. Model at 100% is about as small as you'd want to go with a .04mm…
This Box Organizer will fit ThunderRoad + Expansions up to December 2023. Corner Piece Files keep the road tiles from shifting around in the bottom of the box. Damage Tiles and Ongoing Damage Card Trays stack. Card tray has mag-locking…
Vampire The Masquerade: Vendetta - žeton prvního hráče.
Original design of the body has a small default, and have 2 open bridges, just fixed it. Thanks to the original design!
Some improvements : MMU version for the ‘coinface’ wich let you choose 3 colors for the body, inlay, and arrows Fixed ‘flap’, I was never able to mount the original one Easier to mount ‘coinface’, redesigned legs and clip for an easy mount
The original drum is big (~126 cm³ of candy capacity), I redesigned 3 smaller size : X-Small ~32 cm³ Small ~53 cm³ Medium ~73 cm³ Thanks to the orignal author of this dispenser!
Vending Machine Keys Category: Machine Tools
Advent wreath Simply plug them together and put 1 flame on each advent. Have fun ! Advendskranz Einfach zusammenstecken und an jedem Advent 1 Flamme draufstecken. Viel Spaß !
print settings infill- 20% supports touching build plate brim use glue to attach two sides together, easy to print.
Sturdy version of a key, which is used to shut off the alert system of some vending machines. Original ones cost around 10 € + 25 € shipment and they use to break quickly.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
this model is thinked to be printed in parts. this need 3 bolts and screws or it can be glued.
A vending machine with magnetic assembly. Magnets for this scale are 6x 2.75mm (6x3 neodymium magnets). Shelves on the inside allow for easier glue-in of optional content (not included). Contact me if you need a different license :)
This model is a collection of a full set of Stratego Alive cards. Although the text on the cards is in Dutch, the game can still be played by only using the numbers on the cards. In fact, only playing by the numbers makes it easier. There…
Warcraft Rumble - Baron Rivendare, provided by Blizzard https://warcraftrumble.blizzard.com/en-gb/collection
Chibi V – The Silent Rebel
Iconic Movie Moments - V for Vendetta - The Standoff - 2005
Náhradní tokeny pro hru Vampire The Masquerade: Vendetta
I create this token to put on top of any car when some of them is on fire. The game provides you a fire cardboard token to put on the table but nothing over the cars, so I give you this idea. You need to print 2 small flames and 1 big…
Kit to build a vending machine for Hershey's Kisses, easy assembly. Takes nickels, quarters, and 20 Euro Cent coins. 0.20mm layer height 0.40mm nozzle 15% infill no supports Print all parts together or separately. Snap out the wall…
Now you can have your very own Brendan S.C.S.M, complete with decals! The standard size Brendan comes in at is about 1:16-1:15 in scale, meaning your 4-5" figures are perfect for displaying along side him. If you are printing this Brendan…
Simple lid for sealing food cans. A small additional rim holds the lid securely in place through the collar at the top of the can. Printed in TPU, the lids are flexible enough to slip over this collar. It fits the cans with the dog wet…
A beautiful minimalist painting of a Lavender on the wall or with a stand on the table. Size 195 x 200 mm You can find the small print stand for the table on my profile ↓ https://www.printables.com/model/759271-small-wall-decoration-stand…
What is this A printable box with a cross stitch lid, available in two shapes: rectangle (60 × 94mm) and circle (⌀80mm). Each shape comes with a blank canvas lid for any design, and a lavender pattern lid with a full stitch chart included…
It’s a compact, fully mechanical tabletop vending machine designed to dispense one Pokémon card per quarter . The machine holds a stack of standard trading cards—either raw or in penny sleeves—inside a protected, visible magazine so…
Vend candy dispenser 20 eurocent coin plate
Brenda doesn’t tell you jokes. She just does the job. —————————————————————————— All my designs are protected by copyright laws. Upon downloading you agree to use the files for personal purposes only. This means you do NOT have the right…
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Guy Fawkes Mask, in V for Vendetta. I wanted to make it with shadows, so I created this design, for easy filaments change. Use filaments change as follows: Layer Height = 0.2 mm 1- Start with White 2- Grey color change @ 2.2 mm 3- Black…
Just a simple remix, No Supports
This business card holder provides the cards in alphabetical order, making each found more easily. The alpha index separators are 1.6 mm thick and quite flexible. When installing, bend the separator so that the pins can be placed in the…
a basic 1:64 soda vending machine
Este modelo STL representa una máquina expendedora detallada con elementos realistas: varios estantes para productos, un panel con botones, ranura para monedas y área de exhibición. Su estructura cuenta con geometría limpia, ideal para…
Bigger vend jar, with maximum 45° overhang to make it easier to print. I printed it in transparant PETG, with 3 perimeters, and 100% infill.
Rotate the model on its back side and print with no supports.
Estatuilla de personaje masculino de 10 cm de altura personaje de gta 10cm tall male GTA character figurine
A vending machine to store your sleeved* cards for Mister Torgue's Arena of Badassery (MTAOB) during game play. As you can see from the pic, there's plenty of room behind the stack of Dr Zed's Meds cards. So for these, the ammo and the…
3D Printable Coins in the same size as Real 1 & 2 Euro Coins. Perfect for Old Venting Machienes, etc. Key Features: Unique Coin Designs: These 3D models feature Euro coins with unconventional and distinctive designs, setting them apart…
Just a quick design to replace any missing coins for the Melissa and Doug Vending Machine toy.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This project is still being actively developed, there are some pieces I'm still working on. Spacer/Thumbhole stock and adapter for K18 and K24 are in progress, just need to finish up when work allows. Anyway, Devendra is a remix of…
Coin that fits the Lego minifig vending machine (21358) . Given that the coins included in the Lego set have a high likelihood of getting lost and use rather uncommon parts, I figured making some spares would come in handy soon or later.…
A small box to put lavender flowers (or any plants, like.. well... you know) in your wardrobe in order to repel insects and keep your clothes fresh. I used 2 of them for a big wardrobe. Printed in PLA at 0.2mm/15% infill. The lid can be a…
These are 3 piece side skirts that include a minor mudguard up front and a rail on the bottom to help (in theory) keep air from escaping the sides of the car and help channel the air to the rear diffuser. I printed these 7 walls thick…
🔧 Smart Mini Vending Machine – Award-Winning ESP32-Powered Project This innovative vending machine was designed and built for the Robotíáda competition , where it secured first place ! 🏆 It dispenses up to 4 products (Tic Tac, Airways,…
Calming, elegant, and full of fragrance in spirit — the Hueforge lavender bookmark embodies peace, serenity, and quiet strength. Inspired by stained glass artistry , this 3D printable Hueforge model captures the delicate lavender stem in…
Too many tiny hands touching things? Put up a sign that they will be fed to the dragons! Add holes to hang as needed, 3mf contains modifiers for ¼" holes I used to attach to my shelves at the shop. Add filament swaps to layers or use MMU…
Tevekkeltü Alellah /Allah'a güvendim.
Wall art: Bee on lavender (three colours)
Low Poly Candy Vending Machine
Lichtgevende meisjes naam Eva, Luminous women's name Eva
Low Poly Vending Machine
Frottage creation, matrix for graphics printing: Bee on lavender
You have small kids? Do they like vending machines and playing with cardboard boxes? I have a very quick print for you to have an afternoon of fun… Get a cardboard box, cut in holes and stick a coin slots and/or slot for bills in. Also…
Vendel-period spectacle helmet Geographical and Temporal Origin Location: These helmets are primarily associated with the Uppland region of Sweden, specifically the boat grave sites at Vendel and Valsgärde. Time Period: They were…
3D Printable Coins in the same size as Real 1 & 2 Euro Coins. Perfect for Old Venting Machienes, etc. 1UP=1€ 2UP=2€
Flexibler Konservendosendeckel / Flex Tin Can Lid / Anpassbares / Customizable OpenSCAD- Script → 0.4 Nozzle → 0.2 mm Layer Height, → 15% infill, → TPU → No support → nicht für Lebebsmittel / not for food → Aufbewahrung Werkstatt /…
Printable hotend for the V400 using stock components and adding additional necessities for multi material printing. Integrated cutter, filament sensor, ADXL, Knomi2, Canbus, addressable LEDS, etc
arrma vendeta front spliter but you will have to make your own holes to mount it
A Medical Dispensary Machine, also known as a vending machine, is an automated device designed to dispense medications and other medical supplies. The machine typically consists of a sturdy metal or plastic cabinet with a glass front that…
Low Poly Cyberpunk Vending Machine
We explore how 3D printing was pivotal in creating a coin collector specifically for vending machines. The enclosure for this device — which holds a coin acceptor, an LCD screen, and a control board — was entirely crafted and produced…
Advends Stern Viel Spaß !
This machine was made with PLA; No Supports Infill 15% PLA 200°c Ext || 60° Bed
I created these boxes to display mini models for our store. I wanted something with a lid that locked tight so they are easy to transport without fear of things falling out. The lids fit tight and have tabs on the base and lid for extra…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Miniature 1:12 scale vending machine featuring stocked…
Lichtgevende meisjes naam Millie, Luminous women's name Millie
Rear wing I designed for the Armma Vendetta. Prints in 3 pieces vertically and then super glue them together after printing. I printed mine in Petg. Category: R/C Vehicles
A decorative lavender wall art model designed for clean and easy 3D printing. This piece is part of my Sacred Flowers Collection, a series of stylized floral wall art designs created for modern home and workspace decoration. The model…
Llave para simular maquina cerrada en maquinas de vending o similares
