Liczymy pasujące modele…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
The Crucible is a Paladin-class Corvette which appeared in Star Wars: The Clone Wars. It was an Old Republic-Era ship, used by the Jedi Order to take Jedi Younglings on a journey to construct their own lightsabers. Dimensions Length Width…
The logo is the one used by Corvette C6, that was made between 2005 and 2013. This is a print using four colors, so if you dont have the MMU you will have eight manual changes. Only the first two layers include multicolor, so after that…
A detailed Star Wars inspired bookmark, designed to be super thin with some topographical detail. No page damage, no hassle, just a cool design. The Corellian Corvette (CR90) was a ship commonly used by the Alliance to Restore the…
This is a print using two colors, and if you dont have the MMU you will have manual color changes. Only the first two layers include multicolor, so after that it runs without supervision. Print starts with a color change to the contrast…
Multicolor, single part coaster with the C8 Corvette logo. Color changes are handled by swapping filament colors at specific layers. Original model is 133 mm dia. but can resize to 100 mm dia. if it is too large for your taste. OBJ and…
Se si stampa in PLA consigliato usare il g.code già presente quando si fa lo slasing ruotare l'asse x di 90° Stampa realizzata con 220° per l'ugello 50° gradi per il piatto
Halter / Ständer für Mess-Tabletten, Küvetten und Stössel. Für ein Photometer zur Wasseranalyse in der Bädertechnik. Die Stellfläche für die Küvetten und Deckel ist durch das Gitter und auch im unteren Bereich von vorne und hinten…
Not perfect but it works. I couldn't find a model for my year so i made one. I reused the metal screw nuts and it fit the new plastic. I would use PETG ABS or ASA. PETG seemed to work. 4 walls 20% PETG
The Ship The Corellian CR90 Corvette, also known as the Rebel Blockade Runner, is a 150m long ship, used as a freighter, consular vessel and warship alike. Probably the most famous ship of this class is Tantive IV, the first ship to…
This is a 3D printed model of a generic Corvette Class Light Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Phobos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with…
Summary This is a model of a Chevrolet Corvette Z06 (C6) in a kit card style. Some characteristic details can be discovered. Equipped with separate exhausts ;-) After printing, the model can be assembled with the help of integrated…
A quick and easy Corvette logo. Prints beautifully in single or dual colour.
This cartoon style model is inspired by 1970 Corvette C3 Stingray . Size is approximately: length 105mm, width 70mm, height 45mm) Only two parts to print No support needed Does not need any additional non-3dprinted parts (Note: Normally…
Federal Corvette model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
Corvette C8 Wall Art Easy to print for up to 100 cm length on Prusa MK3/4 bed size. Of course you can scale it the size you want. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on the wall. Invisible and…
Being a huge fan of the Corvette brand, I had to make a set of silhouette models for each generation of Corvette in this style.
Welcome to The Low Poly Auto Show! This is a low-poly 1964 Stingray. Designed to be printed without supports at 0.1/0.2 mm layer height if you have a solid machine with plenty of cooling. I recommend you print this at full size, otherwise…
Chevrolet Corvette C8 2020 Modèle de voiture imprimable en 3D, tout comme le vrai. La Chevrolet Corvette C8 est la huitième génération de la Corvette voiture de sport fabriquée par le constructeur automobile américain Chevrolet. La Chevy…
This model took a ridiculous amount of time to clean up to the point of being printable. Print instructions .1mm Layer Height. Infill doesn't matter much. Glue together when finished.
Here is a 2020-Present C8 Corvette logo with multi-layer-height colors. No MMU needed! Open the provided .3MF file for a pre-sliced and colored version, or use the provided STL and slice it how you like.
Please click ❤ LIKE ❤ if you appreciate my work 😊 The American icon of speed – now as a stunning wall art piece. This 3D printable Chevrolet Corvette C7 model captures the sleek, aggressive lines of the legendary American sports car.…
This is my model of the Ancient/Asuran Light Corvette from the Stargate Atlantis. The model is a kit and does not require any glue. The antennas are skipped modelwise and are done with toothpicks. I divided the model based on the color of…
Model of Formula 1 helmet. TIP: To get optimal result don't make the model smaller - letters could be unreadable. The bigger it is, the higher details it has. NOTE: Helmet isn't filled out, so don't forget to use supports, (I recommend…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
I was tired of losing a little bit of powder when it balls up and falls out of my reagent satchets. This print works well so far, although I'd like to try sanding the inner funnel portion, vapor smooth it or print it in SLA for further…
Here is a 1997-2004 C5 Corvette logo with multi-layer-height colors. No MMU needed! Open the provided .3MF file for a pre-sliced and colored version, or use the provided STL and slice it how you like.
Here is a 2005-2013 C6 Corvette logo with multi-layer-height colors. No MMU needed! Open the provided .3MF file for a pre-sliced and colored version, or use the provided STL and slice it how you like.
Here is a 2014-2019 C7 Corvette logo with multi-layer-height colors. No MMU needed! Open the provided .3MF file for a pre-sliced and colored version, or use the provided STL and slice it how you like.
Comes in handy when freezing multiple samples in liquid nitrogen. For an alternative design, please check this model: https://www.printables.com/model/1326290-eppendorf-cuvette-vial-holder-10x-25x
This multicolor print is modeled after the physical emblem found on the 2000 corvette. I have included multiple pre-sliced configuration for multicolor printers as well as STL's pre-scaled to fit any print bed. If opening the STL to your…
Anyone that owns a c3 Corvette knows how annoying the lack of cup holders can be. I designed it to secure to brake handle and holds two cups. Easy removal for use of brake.
A set of six iconic Corvette models, reduced to small, clean objects that keep their main shape and character. Includes: 1953 Corvette C1, 1963 Corvette Stingray C2, 1969 Corvette C3, 1984 Corvette C4, 2009 Corvette ZR1 C6 and 2020…
I currently use a lot of Gridfinity for my drawers. That's why I transferred one of my favorite Hanna checker cuvette holders to Gridfinity. You can find the original on Thinigiverse by pw98 .
The general shape of the base was inspired by the other C5 cupholders available throughout the internet. This has some unique features: A locking tab to prevent it from lifting out with your cup. Increased ring diameter I've shared my CAD…
This C8 STL is 5 foot in length but can be scaled down to about 20% to fit on a single build plate (shown).
EXCLUSIVE DESIGN BY TWIST3D MODELS Follow us on https://www.instagram.com/twist3dmodels/ The American Supersport Corvette C5 modeled after the American Chevy icon, featuring an aggressive stance and a tooned low style! Now with a 3MF file…
A kit card of one of my favorite Corvettes the C4 1983-1996 model. The tires should spin if the axle is glued in right. I also sell these on my Etsy: https://glacierfrost.etsy.com
A kit card of my favorite Corvette model, the 1967-1982 C3 Corvette (Technically it's the Z01 but they use the same bodywork and this isn't a high-res model.) Tires should spin if axle is glued on right. I also sell these on Etsy:…
Corvette car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 80% to make it more comfortable and less bulky.
A kit card of one of my favotite models of Corvette the C5 1997-2004 model. It needs some glue on the axles but should have spinnable wheels. I also sell these over on Etsy: https://glacierfrost.etsy.com
Here is a 1969-1983 C3 Corvette logo with multi-layer-height colors. No MMU needed! Open the provided .3MF file for a pre-sliced and colored version, or use the provided STL and slice it how you like.
I found this model on GrabCAD. https://grabcad.com/library/chevrolet-corvette-c7-stingray-14-1 It's an awesome model but not 3D printable. !!! Please read the ENTIRE print instructions before attempting to print this !!! Instructions are…
Color order: white, red, yellow, black.
Printing Only the Bottom part needs supports to be successfully printed, other parts are printable without supports. Assembly list of non-printed parts 1 pc - razor blade Step 1 Place the razor blade onto the bottom part. Be careful the…
Wall Art Silhouette model of the Chevrolet Corvette c7 Z06. Adjustable size. I accept model suggestions or ideas.
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
This model took a lot of time and patience to complete every single piece and was meticulously designed to fit together properly. Depending on the type of filament and 3D printer you use, some sizes may need slight adjustments for the…
Here is a 1984-1996 C4 Corvette logo with multi-layer-height colors. No MMU needed! Open the provided .3MF file for a pre-sliced and colored version, or use the provided STL and slice it how you like.
an be printed together or separately in other colours the corvettei is very realistic Print in place kit card , Assembly required need to use a support
Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the (printable) 3D Scanner see: https://www.thingiverse.com/thing:2755968 Finally, there is a website, where I will bundle all the…
Corvette Summer, 70's movie car. printed with PLA using tree supports, will be remixing in the future to print separate parts for better detail and ease of painting.
c5 fender ducts i saw these on a car at the track one day and wanted them but didnt want to pay for the professional ones so i decided to attempt to make them myself they work but could use some refinement please feel free to make…
The Carrion Spike was Tarkins personal ship in the novel "Tarkin" by James Luceno and later the flagship of First Order Agent Terex in the Comics “Star Wars - Poe Dameron #01-#13”. The Carrion Spike is a stealth corvette almost 150m in…
This wall art is modeled after a c7 corvette, and is made to fit on a ender 3 or similar build plates. It prints easily + looks great on the wall! Enjoy
This is a simple mashup of two different Corvette models to make a nice plaque. The lettering is what you would see on the back of a 1976-1979 C3 Corvette. Print settings: eSun PLA+ 205/65 C 0.20 mm layer height Leave a picture of your…
This is a replacement radio console for your C3 corvette. It is only a blank template for you to modify to fit your own radio and gauges. I have included the SketchUp file I plan to replace my original radio with a standard 1 din radio,…
Here is a 1953-1962 C1 Corvette logo with multi-layer-height colors. No MMU needed! Open the provided .3MF file for a pre-sliced and colored version, or use the provided STL and slice it how you like.
LEGO Chevrolet Corvette C8
Corvette C3 This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
A kit card of the 2014-2019 C7 Corvette model. The axles need glue and if applied carefully the wheels should spin.
Here is the 3d Model I used to print my Rear Diffuser on the back of my 1969 Corvette. You can see the progress on my Youtube channel. https://www.youtube.com/watch?v=1Ixm89CGg68 Leave a comment if you do use it! Measurements may be off,…
Here is a 1963-1968 C2 Corvette logo with multi-layer-height colors. No MMU needed! Open the provided .3MF file for a pre-sliced and colored version, or use the provided STL and slice it how you like.
Silhouette model of Corvette - C4 in 1/43 scale
A super cool replica of the Corvette c8 Stingray
A multilayer print. Use the pause at height to get the desired effect. I used .2 layer heights
Designed a combination cup holder/cell phone insert for the C7 Corvette. For the cell phone pocket, there is the ability to install a USB-A / Lightening plug at the bottom to tie into the USB-A slot in the console pocket to play Pandora…
This is my Corvette C8 Lightbox with stand and what I used to assemble it. Bambu Labs P1S/AMS .04 Nozzle 10% Gyroid Infill Filaments used for this project: Elegoo PLA - White Elegoo PLA - Black Elegoo PLA - Yellow Overture PLA - Fresh Red…
I designed this OEM Corvette C4 inspired rim. It is meant for Hot Wheels customization and not to 1:64 scale yet.
LEGO Chevrolet Corvette C1 1955
Chevrolet Corvette C6 ZR1 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Chevy Corvette Keychain 40mm x 30mm x 3.5mm
Best with PETG, ASA, ABS, etc. Category: Automotive
Simple cuvettes holder for 10 cuvettes. It prints easily without support or raft tutorial on how to design it: https://www.youtube.com/watch?v=DE253fMF7Rs Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Wall mount for Lego Technic Chevrolet Corvette Stingray Blue. I assume it would also work for the yellow version 42205. It's not pretty but it works!
This is my Corvette C6 Lightbox with stand and what I used to assemble it. Bambu Labs P1S/AMS .04 Nozzle 10% Gyroid Infill Filaments used for this project: Elegoo PLA - White Elegoo PLA - Black Elegoo PLA - Yellow Overture PLA - Fresh Red…
This is my Corvette C7 Lightbox with stand and what I used to assemble it. Bambu Labs P1S/AMS .04 Nozzle 10% Gyroid Infill Filaments used for this project: Elegoo PLA - White Elegoo PLA - Black Elegoo PLA - Yellow Overture PLA - Fresh Red…
Qualification Print for the Vetted Maker Program found at 3d-mobility.org . All vetted makers should print this TPU strap AND PETG test unit. This requires both TPU and PETG. It is also the lap strap for the TMT project, so a successful…
LEGO Chevrolet Corvette ZR1
This is the Corellian Corvette that appears at the start of the Star Wars Episode IV: A New Hope Print instructions Category: 3D Printing Summary This is the Corellian Corvette that appears at the start of the Star Wars Episode IV: A New…
I found the cupholder divider in my C7 Corvette to be awful. It didn't stay in place and made it practically useless for holding a drink. Because of this, I went down a path of designing a better divider that worked with zero…
The American Dream, Cast in Curves. This is not a car. This is the open-road promise of post-war optimism, cast in gleaming fiberglass. The Chevrolet Corvette immortalizes the youthful, exuberant spirit of America's first true sports car.…
These models are modified from the original design of madewithrealtornados https://www.thingiverse.com/thing:6166809 Files included are the 3 bolt mount for both sides. Modified from the original 2 bolt mount. Be aware that you must use…
Cupholder to replace the *terrible* stock cup holder.
Cuvette drying rack. Holds 5 or 10 cuvettes and their caps. Fits all standard UV-Visible and spectrophotometry cuvettes (1.2 x 1.2 mm). Smaller version (5x) does not have a cap tray.
EG3Dprinting did great with the individual silhouette models. I combined them together with using their spacer tool into one plaque. Base is 2mm thick, PrusaSlicer does a great job of adding the color change when you select to slice it…
Corvette Logo & Writing keychain
Stingray - Nick Mancuso with 1965 Corvette C2 - 1985 3D printable model.
Because the original could not hold the blind.
Used to align the hood latches on C3 Corvettes See https://www.corvetteactioncenter.com/tech/knowledgebase/article/1968-corvette-chevrolet-service-news-1968-corvette-hood-hood-lock-adjustment-1239.html for details.
coaster with C6 flag Print Settings Printer: cr6-se Rafts: No Supports: No Category: Office
Description Cuvette holder for 6 strandard UV-VIS spectroscopy cuvettes. The walls with slits are incut on the inside so they do not come into contact with the cuvette glass risking scratches. It has mounting points specific to one…
stackable coasters with C1, C3, 50th anniversary and C8 versions. Same format as my other coasters. Laid out for single extruder with 2 to 3 layers per color. Printed mine in PETG with .4 nozzle and .2 layer height. Jan 19 2025 - Added…
