P
Printablesfly
IKEA VINDRIKTNING ESP8266 Wemos D1 Clip
IKEA VINDRIKTNING ESP8266 Wemos D1 Clip to fix an ESP to get the dust values from the device via WLAN. PLA - no supports - 100% infill
- Pobrania
- 251
- Polubienia
- 38
- Ocena
- 4,83
Wyniki wyszukiwania: vindr
27 modeli
P
PrintablesMirselber
VINDRIKTNING PCB holder
Small PCB holder that allows easy installation of a D1 Mini board and a BME280 sensor by press fit.
- Pobrania
- 205
- Polubienia
- 30
- Ocena
- 5
P
PrintablesToby
IKEA Vindriktning - D1 mini + Sensors
Hello everyone, I made this simple IKEA Vindriktning inlay for a neat placement of the D1 Mini with some sensors. (CCS811 - for CO2 measurement; DHT 22 - for CCS811 adjustment or simple humidity/temperature measurements) Sensors inside:…
- Pobrania
- 179
- Polubienia
- 29
- Ocena
- 5
P
PrintablesDennis
SKÅDIS VINDRIKTNING mount | Easier print
Easy mount for your new favorite air quality sensor from ikea. USB-C-cable passthrough included. If mounted inside an enclosure I would recommend to print it at least in PETG but better in ASA oder ABS. Otherwise PLA should be fine
- Pobrania
- 59
- Polubienia
- 7
- Ocena
- 0
P
PrintablesTátaGEEK
IKEA Vindriktning front cover with OLED
This is a remix. I made the hole for the oled display smaller and rounded the corners of the hole. The hole is ready for a 0.91" OLED display. PCB: https://github.com/LaskaKit/ESP-Vindriktning…
- Pobrania
- 403
- Polubienia
- 69
- Ocena
- 5
P
PrintablesMvRens
IKEA Vindriktning wall mount
A simple wall mount for the IKEA Vindriktning air quality sensor that keeps it a small distance away from the wall so it can still breathe. Includes a hole for the USB cable. Print on it's side and it shouldn't need supports. I've…
- Pobrania
- 87
- Polubienia
- 13
- Ocena
- 5
P
PrintablesJenstheclown
Ikea Vindriktning ESP8266
This project is not finished and i'm still working on it to integrate more sensors in the housing. To use this project you need to test and improvise at some stages.. Basically you need to buy a Ikea Vindriktning and a esp8266 mini. You…
- Pobrania
- 74
- Polubienia
- 14
- Ocena
- 4
P
PrintablesBretthomas
Nevermore V6 Plenum for West3d's Berserker Vindr Fans
In order to fit the fans into the plenum a few small cuts need to be made with flush cutters. I highly recommend wearing safety glasses when trimming pieces off of the fans as they WILL go flying. First: cut off the wire retention clip on…
- Pobrania
- 74
- Polubienia
- 8
- Ocena
- 5
P
Printablesikilledmypc
VINDRIKTNING mount for SKÅDIS
I printed it in PLA but better would probably be to print it in something flexible like PET-G
- Pobrania
- 69
- Polubienia
- 9
- Ocena
- 5
P
Printablesnw
IKEA VINDRIKTNING Under Shelf Holder Mount
Allows you to hang your IKEA VINDRIKTNING under a shelf.
- Pobrania
- 66
- Polubienia
- 17
- Ocena
- 5
P
PrintablesDave
XOL Rapido2HF Vindr Neopixels 3010 Fan
Added Neopixels in place of the Sequin part lights. Moved Neopixels closer to the front to better illuminate the nozzle and parts. Extended the skirt in front to hide the LEDs. I have a bunch of Neopixels on hand and they are much…
- Pobrania
- 61
- Polubienia
- 8
- Ocena
- 5
P
Printablesdb3jhf
Mounting for D1 mini on IKEA Vindriktning
This mounting reduces time for the upgrade, keeps the D1 board in place and ensures an adequate airflow to the sensor. Just print the mounting (PLA, 0,2mm layers and 23% infill will do just fine) and fix the ESP-Board with two 2 x 5 mm…
- Pobrania
- 57
- Polubienia
- 8
- Ocena
- 0
P
Printableskiklhorn
IKEA VINDRIKTNING front for the LaskaKit V2
Multiple related things to IKEA VINDRIKTNING LaskaKit V2 https://www.laskakit.cz/laskakit-esp-vindriktning-esp-32-i2c/ Multiple related things to IKEA VINDRIKTNING LaskaKit V2 1) Fitting adjuster, offset "ring" for use with original…
- Pobrania
- 56
- Polubienia
- 16
- Ocena
- 5
P
PrintablesMawoka
BME280 Holder for IKEA VINDRIKTNING
This model helps you mount a BME280 to the backside of an Ikea VINDRIKTNING . This model requires support and I'd recommend printing it with the big pillars facing downwards. But be careful when removing the supports!
- Pobrania
- 42
- Polubienia
- 2
- Ocena
- 0
P
Printablesdistrubi
IKEA VINDRIKTNING LED cover
IKEA VINDRIKTNING air quality sensor cover I have several VINDRIKTNING sensors at home which are connected to an ESP8266. They're sending the PM2.5 value to an Influx Database. I'm using Grafana to visualize this data, so I don't need the…
- Pobrania
- 41
- Polubienia
- 5
- Ocena
- 5
P
Printablesboundlessdexter
Sensor box like - Ikea VINDRIKTNING for NodeMCU
This 3D printable enclosure is designed to house your NodeMCU microcontroller board, transforming it into a sensor box similar to the Ikea VINDRIKTNING. This enclosure allows you to create a sleek and informative sensor box, similar to…
- Pobrania
- 37
- Polubienia
- 6
- Ocena
- 5
P
PrintablesOK1CJH
VINDRIKTNING SCD41 Laskakit
příchytka PCB s CO2 čidlem z Laskakit do krabičky IKEA VINDRIKTNING https://www.laskakit.cz/laskakit-scd41-senzor-co2--teploty-a-vlhkosti-vzduchu/ https://www.laskakit.cz/laskakit-esp-vindriktning-esp-32-i2c/
- Pobrania
- 36
- Polubienia
- 6
- Ocena
- 0
P
Printableswhc2001
MH-Z19E Sensor Mount for IKEA VINDRIKTNING
This is a simple mount to install an MH-Z19E carbon dioxide sensor into an ESP8266-enabled IKEA VINDRIKTNING air quality sensor. It's designed to be used with terminal-type (see picture) MH-Z19E, but other suffix with the same dimension…
- Pobrania
- 34
- Polubienia
- 4
- Ocena
- 0
P
PrintablesIsaac7
OSS-class(Vindraon pattern)battlecarrier
This is a fan-made ship I wanted to 3D model. The Vindraon-pattern battlecarrier designated the OSS-class battlecarrier, is one of the largest Executioner-type capital ships that was developed by the defunct Covenant Empire. A rare sight…
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPaw85
IKEA Vindriktning Magnetic Base
This is a magnetic base for IKEA Vindriktning. Helps to secure it on top of machinery and other steel surfaces. The USB cable helps to secure the Vindriktning in the base. Put a drop of CA-glue into each the 6 holes inside of the base and…
- Pobrania
- 32
- Polubienia
- 7
- Ocena
- 0
P
PrintablesRecyclops7590
XOL Dragon UHF Unibody for Vindr fans
I wanted to use some 4010 Vindr fans from West3d on my XOL. These fans have thicker mounting tabs so the supports behind the tabs on the XOL toolhead needed to be adjusted.
- Pobrania
- 29
- Polubienia
- 6
- Ocena
- 5
P
Printableskiklhorn
LaskaKit VINDRIKTNING
Text bude dále upravován na základě zjištění. Zjištěny technické problémy, měřená teplota: Testována verze 240 + ventilated LID, takt procesoru snížen na 80MHz, VEML7700 v módu 4, mezi měřeními disabled, před měřením enabled a vyčkáno…
- Pobrania
- 25
- Polubienia
- 12
- Ocena
- 0
P
PrintablesTheMeanCanEHdian
Micron+ Berserker Vindr Bed Fans & Filter
I wanted to be able to use the Berserker Vindr fans in my Micron+ bed fans and filter. This mod allows those fans to fit while also supporting existing 5015 fan dimensions. Only the modified parts are listed here, you will use the stock…
- Pobrania
- 23
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLaskaKit
LaskaKit ESP-VINDRIKTNING ESP-32 I2C
LaskaKit ESP-VINDRIKTNING ESP-32 I2C 3D model vývojového kitu LaskaKit ESP-VINDRIKTNING ESP-32 I2C, který je kompatibilní s Ikea Vindriktning. Tato deska významně vylepšuje běžně dostupný Ikea Vindriktning o připojení k Wi-Fi, Bluetooth,…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
Printablesrobotbuxton
Vindriktning Pi Pico Enclosure
Background / Purpose I saw these air sensors at IKEA for $7 a piece and knew someone else saw the potential too. Sure enough, after a quick google it looked like there was a simple way to get the data from the sensor into a…
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTom Urlings
IKEA VINDRIKTNING ESP8266 D1 mini holder
This will hold your ESP8266 D1 mini nice and tight when it lives in an IKEA VINDRIKTNING case. Do note that the holder requires you to put pinheaders on your ESP device. The holder will not hold unless you put some pinheaders on that…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0