Liczymy pasujące modele…
Dimensions (LxWxH) 170 x 84 x 53 mm (100% scale) Basic information Great white sharks are definitely among the most fearsome and legendary ocean hunters, so it is not surprising, that everyone would love to have one in their collection.…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
All printable parts for your White LED Strip Add-on. You will also need Basic Board + PSU Add-on, which is shipped automatically with White LED Strip All of the add-ons and community models can be found here . Print instructions You have…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Magnetic Whiteboard Pen Holder Magnetic holder for 4 whiteboard pens. The magnets used are 4 round/cylindrical neodymium magnets (20x3 mm). I use the following magnets: https://www.amazon.de/dp/B088FN6YN6 The magnets are inserted during…
Wydruk około 4,03 €–4,93 € nettoWstępna wycena jednego wariantu
Repost of "The White House - Executive" by MakerBot ( https://www.thingiverse.com/thing:461235 ). It slices at 100% scale in Creality Slicer and fits on my Ender 3 without a skirt. I printed it at 50% scale at 0.2 layer height at 50mm/s…
Wydruk około 28,10 €–34,35 € nettoWstępna wycena jednego wariantu
I made the 3D model from scratch but got the idea from Kindle paperwhite 4 grip. PLA. Took about an hour to make. Fits the kindle paperwhite 11th generation. 74.2 x 124.6 x 8.1 mm Slight issues with model that do not effect the print or…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Mounts: These mounts were designed for Mead® White Board 85356 to allow the board to be quickly removed from the wall without tools (post installation). The mounts work by allowing the board to sit on the Bottom Mounts and swiveling the…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
If you have a whiteboard these gadgets will be very useful. Holds 5 board markers and a board eraser. Can also be used separately. You can glue magnets at the back and install on a metal surface or use 3M double sided tape. Print…
Wydruk około 3,91 €–4,78 € nettoWstępna wycena jednego wariantu
I have a Quartet Whiteboard and designed this 6-marker holder that slides over the whiteboard at the top. I printed mine in black PETG. 1-Jan-2024 - Added a version with 1.9mm holes for markers made by other brands such as Expo.
Wydruk około 6,15 €–7,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement cog for Vectra C and some Saab 93 recirculation units where the small white cog has lost teeth. Where there is a clicking noise from the servo/motor unit one or both of the white cogs may have lost teeth. The larger one can be…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Originally made to fill the Cowling of a 1/12 scale Grumman Goose. Provides a mounting for the Racestar A2212 1400 motor with a spinner setup that is a press fit on the Propeller Adapter (Collet Type) and fitts hard against the motor…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Dieser Griff ermöglicht es, das Kindle Paperwhite 12th Generation (2024) besser zu halten. Er wird einfach angeklipst und die Position kann individuell festgelegt werden. Da sich der Knopf in der Mitte befindet, ist er sowohl für die…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an original design but I took major inspiration from @skino's Kindle Paperwhite Stand . This model fits the 12th gen perfectly at a 25 degree angle. Features: - Stable - will not fall backwards by accident. - Grips the reader with…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
This is a ball-tip for a white cane. I've designed this for a friend, since commercial ball-tips are very expensive. This is designed to be assembled with minimal tools and the cap (the bottom part of the tip) can be replaced as it wears…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A shelf that has room for 5x5mm round magnets to display hot wheels or other 1/64 scale model cars on fridge or shelf Works with 2 magnets, but has room for 5. Have printed in pla 15% infill.
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
Pen Holder for whiteboard marker This model can be used as a whiteboard pen holder. Pens up to 17mm in diameter can be used. Simply glue in some 6x3mm or 6x2mm magnets so that the holder stays at your whiteboard. No support structure…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu
Model Description I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a holder for the Beaglebone White, Black, or Green. Only tested with Beaglebone White, but I am quite certain the physical format is the same. I printed this in PETG in case it sees high-ish temperatures, but PLA would probably be…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieser Griff ermöglicht es, das Kindle Paperwhite 12th Generation (2024) besser zu halten. Er wird einfach angeklipst und die Position kann individuell festgelegt werden. Da sich der Knopf in der Mitte befindet, ist er sowohl für die…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Now with sliding attachable sides! Now with Extension plates. New Coordinate frame plate I made this modular plate so it is possible to snap plates together with the peg-in-hole snap method. They can be used to quickly make todo list on a…
Wydruk około 5,12 €–6,26 € nettoWstępna wycena jednego wariantu
A little shelf I made for my LegaMaster whiteboard. Will hold 1-2 pens. If you only print a part of it, you can also use it as a hook. 0,2mm, 4 perimeters, with brim. I printed with 50% infill.
Wydruk około 4,32 €–5,27 € nettoWstępna wycena jednego wariantu
It is a simple modern Shower Shelf is attached without drilling only with glue here is the link for waterproof glue:…
Wydruk około 18,76 €–22,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Full size pans for watercolours. They have the same size as White Night pans.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple magnetic holders for the slim style (Expo or other brands with a similar style) dry erase pens. The magnet is inserted into the print with a print pause at the appropriate layer. Required Non-Printable Parts: 1x – 12.7 x 3.2mm disc…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
magnetic pen holder for white board, with magnet 20mm x 5mm The pen are Stabilo MARKdry, wipe with only water https://www.supermagnete.fr/aimants-disques-neodyme/disque-magnetique-20mm-5mm_S-20-05-N
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a holder for a A3 whiteboard. It's designed to fit this exactly: https://www.amazon.co.uk/gp/product/B01AG0Y7OS There are two main legs, which are handed. Other plastic parts needed are two hexagonal and two shaped nuts. Finally,…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple 'White Bear' model from black mirror. Easy and fast to print! Recommended slicer settings: 0.2mm layer height enable 'ironing' to get smooth front/top surface Print in white obvs :P
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
This is the mix of the legendary dragon from Yugioh, Blue-Eyes White Dragon, and a bunny. I recommend you print this with supports that are easy to remove in tight spaces because of the mouth and claws. Enjoy this print of a design I…
Wydruk około 3,70 €–4,53 € nettoWstępna wycena jednego wariantu
The STYLE COLLECTION HOME – London Collection brings a cool and inspiring touch to any space. It doesn’t get more stylish than this. The combination of a luxurious, clean design and an edgy vegan leather look creates a sophisticated and…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
2D wall art of Ford Mustang Fastback 10
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
I have an SD card holder which holds the queue of my next print jobs (model here https://www.prusaprinters.org/prints/31652-sd-card-holder ). I mark the enclosure door with the SD card contents (Lack marker holder here…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the plug piece that plugs into the top of the shelf legs. https://www.kmart.com.au/product/3-tier-plastic-trolley-white-43274369/ If you like it please buy me a coffee. https://linktr.ee/andyjc Print Settings No Rafts 60% Infill…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Once printed, insert the hook inside the metal slot on the back of the whiteboard (2 hangers used minimum is recommended), and twist to lock it in place. You may use a self-adhesive Command double-sided strips to secure the back to the…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it.
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
The STYLE COLLECTION HOME – London Collection brings a cool and inspiring touch to any space. It doesn’t get more stylish than this. The combination of a luxurious, clean design and an edgy vegan leather look creates a sophisticated and…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
A STYLE COLLECTION HOME Christmas Ornament is designed to bring modern sophistication to your holiday décor. The Hexagon ornament showcases a bold, geometric shape with a smooth matte finish—elevated by a silky strap that ties the design…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Simple credit card sized slate for white balance in underwater photography. Should obviously be printed in white saltwater resistant filament. I printed it in PETG as no ASA or similar at hand.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you like my work and want to support me bringing you new content please consider supporting me on Thangs Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. You will find 3 folders. One for Resin with…
This is a very highly detailed model created using photogrammetry and manual detail sculpted in by studying the physical object. The subject scanned was a very large male white-tailed deer skull. This model involved applying the use of a…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Gandalf the white staff from lord of the rings! the staff is 1;1 scale and stands over 1.5 meters tall! wanna see what is I'm working on next? or if you guys wanna vote on what I'm gonna make next? keep an eye out on my social media :D…
Classic lawn chair 1/12 scale as always. There are two ways of printing this model First to print the whole thing in one piece using supports Beware removing supports might be difficult, legs could break Second way is to print it in two…
was originally a commission and noticed that their are not many models of this mask and I wanted to contribute to solving that problem. Designed to be wearable thus the bigger eye holes.
Black Cat, White Cat
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
🇺🇸 Welcome to Washington D.C.! This model was created by Alexis Hudson @ alectrodesign In addition to looking great, this is also a beautiful lamp that can be lit from inside with LED lights ! The White House is the official residence and…
from the series of the power rangers, here is the full scale model of the sword of the white power ranger, to be printed in full or in parts depending on your style of printer
This is an insert / organizer for The White Castle with the Matcha expansion and all released promos as of February 2025 across the base and expansion boxes. It supports premium sleeves (Gamegenic Prime shown in the photos), vertical…
This is a Voronoi styled version of my White Tail Deer Model There are 2 versions available: Deer Antler Voronoi A - has denser patterns Deer Antler Voronoi B - has a more sparse pattern (Smaller File) Download the original high detailed…
Full sized White Power Ranger Sword! Can be printed whole or as separate pieces.
I think this is a beautiful scan put out by the Auckland Museum, I just wanted to try and make it more printable and the edges and delicate jaw cartilage strong enough, was fun trying to get it to work with remeshing and other trial and…
Roland PA-48 N Key-Hammer for White Keys These hammers always break at the same spot. The official spare parts are difficult to get and too expensive. To make your own spare part you need the weight from a hammer. This is easy to break…
This star fidget was a amazing model but having an mmu3 I wanted to make it nicer so I added color for mmu3. This is easy to use, just import to slicer, and your done. Print Settings: infil 25% supports No Thank You For Downloading :)
Black and White Keychain! You can use the painting mode in Bambu Studio to paint the faces wherever you want color! I hope you enjoy!
If you like this kind of style then you should also check my Mini Hellboy, Jason Voorhees, Walter White and Peter from Deadpool 2. Please support my work by subscribing to my youtube channel www.youtube.com/wekster
White Rabbit, a character from Lewis Carroll's Alice's Adventures in Wonderland. Alice first meets the White Rabbit at the very beginning of the story, while he is muttering "Oh dear! Oh dear! I shall be too late!" Alice then follows him…
Disney Snow White Apple, with MMU and single extruder in the same file. Just right click the model in slicer and separate to parts for multi material. i also added a loop so it can be hung up for decoration. Enjoy, thanks for looking
The White Tree of Gondor, with a small tray for you to organize your rings and jewelry.
Walter White and Heisenberg Hat. With Added Scalp resized to help create boolean and design your own hat. Use the scalp ( walterwhitescalpforhatboolean ) to remove the appropriate space in your hat so it will fit. Baseball cap, French…
Snow White, the lead character from a 19th-century German fairy tale "Snow White". The fairy tale features such elements as the magic mirror, the poisoned apple, the glass coffin, and the characters of the Evil Queen and the Seven Dwarfs.…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
If you have the Matcha expansion, you might be interested in my insert that adds support for Matcha . UPDATE 12/23/2023 Based on feedback I've received and my own continued use of these models, I have updated two of the boxes.…
For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or PETG both work well; PLA is often easier for beginners.…
After going through my Power Rangers Collection theres still quite a few to upload. Here is a very cool one of the many still to come, Cheers Jace
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
J'invoque le tous puissant dragon blanc aux yeux bleu !!! <(^^)>
It's not a full 3d model but rather a 2.5 layered model. I think it can be useful tor 3D printing with color change. Also It should be possible to use it with some smoothing agent (i.e ABS and acetone or PVB with IPA) to get more shape…
Voici le dragon ultime aux yeux bleu <(^^)>
This is an insert for the white castle by Devir Games. This includes both promo packs (this might be a "problem" for the dice tile tray, if this indeed cause a problem let me know and I will create one to be a tighter fit without promos).…
Made by request. If you want to request a model just message me through Printables.
Dive into the thrilling depths of the ocean with our ferocious Shark figure, perfect for ocean lovers and adventure seekers! 🦈🌊 This file offers an STL ready for printing, presenting options for both with and without a keychain attachment…
If Ned Flanders had a baby with Walter White and Dave the Minion... If you like this kind of style then you should also check my Mini Hellboy, Jason Voorhees, Walter White and Peter from Deadpool 2, Batman...
Designed using parametric equations and Calculus ! (And kids still say, “ when am I ever gonna use this? ” … for shame!) Three polynomials (one for each axis) describe a beautiful curve in 3-space for half of one side tube. Then cap it…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Simple low profile stand for the 11th generation (2021) Kindle Paperwhite. Might work with earlier models, but YMMV. STLs are provided that hold the device at 60°, 65°, 70°, 75°, and 80°. Original design file is parametric as well for…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This will hold a standard whiteboard eraser, cleaning fluid, and several markers. It fits either thin or normal thickness markers, and was designed specifically for either of these two starter sets:…
I caught them in the moment of conversation
Have removed the central section of jamundsen's model ( https://www.thingiverse.com/thing:459709 ) to make it more screen accurate. Supports are not needed for this model, I'd suggest printing slow towards the top. Use a 10mm brim for…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
I created this model of a great white shark in Nomad Sculpt. It's a fearsome predator that can appear without warning on your 3D printer bed...
This is a set of pieces that can be used to recreate the Boba Fett - White figure at 500% scale. This minifigure was included in two promotional sets given away at the New York Toy Fair in 2010. A Presentation Box with Exclusive Book and…
3 Colour ‘Filament Painting’ model - Op-Art White Tiger Portrait, made using Bambu filaments. (I recommend the following speed settings for the bambu with 0.04 layers, inner walls, outer walls and gap infill - 200mm/s, sparse infill,…
UPDATE 5/13/2023: As requested, I've added a mic and stand. You will need to print an extra Stand Tripod [x3].stl as well as the four pieces in the “Mic” folder. It's been a few days since I've uploaded anything so I hope this makes up…
This simple white board organizer can hold 6 markers along with the eraser. This new design is thinner and have an opening at the bottom that lets you see the pen's caps. The pen can now be stored with the cap downward. Support is not…
This is my fourth model of a game system I have made. The STEP files should include color, but the ipt and iam parts Do. I used an actual DS, so the measurements should be accurate (as accurate as you can get with a tape measure). link to…
Standard bath/shower hose (BSPP) 1/2 inch - use as plug, nozzle, or template to build your own adapters. Cutout for easier fit (seals against base plate, not through thread). Original FreeCAD source file is provided, to adjust all…
I remixed a modell for Xiaomi Mi Temperature and Humidity Monitor 2. And I designed a specific funnel for easier filling. HF!
Public domain model of a white pigeon by Som_Render . Originally uploaded to Blend Swap . Even with a netfabb mesh repair, it's difficult to capture the detail of the wing feathers in a 3d-print slice.
🇬🇷 Καλώς ήρθατε στο Θεσσαλονίκη! Welcome to Thessaloniki, Greece! This model was created by Dany Sánchez . Three versions are provided: Regular with flag on top Historical reconstruction of the perimetral walls, demolished in 1911. The…
A simple whiteboard marker holder for four markers with recesses for small magnets (10mm diameter, 2mm depth). You will need 6 magnets and have to print the model twice. Print Settings Printer Brand: Anycubic Printer: Semi-closed 4Max…
This white-tailed deer statue captures the elegance of North American woodland wildlife with a friendly, approachable style. The form balances realism with soft, printable geometry that works well for FDM printers. Generated using…
Organization tool for whiteboard markers and eraser. It fits 12 Expo dry erase markers. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: Yes Resolution: .2 Infill: 10% Notes: Supports recommended…
Warning This case is intended for use with the Kindle Paperwhite 11th Gen (2021 edition). It might work with other Kindle models, but there are a lot of variants out there with small but significant differences. If you decide to print…
I created this for fun. Print this with no supports, except add them to the front clip arms on the mount stl. I used cubic infill 5% for base and roof with 3 walls, 10% for mount with 4 walls. uses approx. 615g total.
Remix made in my free time of a sculpt by mz4250, changed the pose a bit to more of my taste, hope you like it. No supports, i trust you, you cand do it!
This is an organizer/inlay for the boardgame The White Castle.. It supports vertical storage and passes the "shake test". Sleeved cards work! Print all files one time, except "Jugadores.stl" (four times).
A few years ago, I went through a “wandmaking phase” where I was modelling and printing a bunch of custom wands that combined my love for Harry Potter and various other franchises. Had originally planned to sell them, but thought it'd be…
