110 modeli
Low poly model of an egg (only the wireframe) Print instructions Use a brim (About 5 - 10 mm) Can be printed without any support (possible that some oozing has to be removed) Print with 0.15mm layer height For better results use the Layer…
I had some real estate left on the Skadis pegboard and 3 spare wireframe skulls by philnelson https://www.thingiverse.com/thing:1388237 Of course i'm going to the mount skulls onto a pegboard! The adaptor is designed to fit the skull…
Christmas challenge Challenge yourself and print this Christmas tree and share your results. Design This tree was carefuly designed to be fully printable without supports. Printing tips? no supports higher retractions lower speed lower…
Very nice skull made out of a fine mesh. Can be printed in different scales and used as a coin holder or just an organzin help. Print instructions To achieve high detail, print with a 0.25 nozzle at 0.10 mmlayer height and lightly torch…
Just change the scale to print the size you need. Works better the bigger the cat. No supports required. COMMERCIAL LICENSE AVAILABLE: https://patreon.com/3DPA Check out our other models . Your likes and downloads support more content.…
A remix of @BPmakesthings Howling Wolf Low Poly Model. Pictured: Right is original version printed at 100% scale, Left is slim version printed at 150% scale. Printed at .2mm layer height, 3 walls. There is not much infill in the model.…
This model is made as a part to teach students how to get into fusion workflow. Also how to be the part of printables community. Reimagined og figet toy.
Inspired by https://www.printables.com/model/196949-spider-man-web-only-lets-retract No support needed !
Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one, then parsed it down to just a wire frame for minimum weight. Dimensions are…
This model features a wireframe rhombic dodecahedron, designed in CAD and refined through an iterative process to form a Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring any…
A remix of the Chest Set Wireframe by Jun0 Each base has a 1.5mm deep circular indent to fill to give the pieces weight. Note: Support from Build Platform Only is recommended, and should be removed cleanly if printed properly. Thanks Jun0…
This can be put on the table as a decoration. Without any practical purpose.
This is a blender edit of the owl designed by Cushwa. I've gotten the inspiration form Thomas Sanladerer. I haven't managed to print this successfully but I'm still trying. I'm curious to find out how you guys manage to print this! Edit:…
Valentine Heart Design 13 collection Basic heart shape and variants with smoothed, LowPoly, Wireframe and Voronoi styled design If you like it --> press like it :-) Make your loved ones happy with this design heart! Take a look at my…
Wireframe Apollo Astronaut Support Free Remix Subscribe Now! Remix to support free and printed. Wireframe Version: Solid Version here https://www.thingiverse.com/thing:4615496 : Category: Sculptures
This is a wireframe head of a deer, inspired by various wireframe sculptures, mostly the one from Dotsan . The model is rather hard to print if you don't want to have 10 times more plastic in supports than in the model itself. To try to…
Remix of the very cool model "Wireframe Easter Egg" from Anders644PI (thingverse.com). I cutted it and made a edge to hold an egg. Feel free to decorate the egg and give away to friends as a easter gift. Print Settings Printer Brand:…
The famous infinity cube fidget in wireframe! I wanted to recreate the infinity cube with as much empty space inside as possible, while still maintaining enough strength and print-ability. The cubes can be printed individually and in…
Unleash your inner superhero with this 3D printable Batman wireframe keychain. Inspired by the iconic bat symbol, this lightweight and stylish accessory is perfect for Batman fans, collectors, and cosplay enthusiasts alike. The intricate…
Hey there! I made this 43cm (16.93 inches) wall art that can be printed in one, two or even three pieces, so it's printable in its original size on smaller 3d printers aswell. However if you'd like to scale it up or down, go ahead! The…
I really like this model and wanted to share it.
This pendant is designed in collaboration with my aunt as a present for my mom. The pendant is design to fit on hoop earrings, as shown on the pictures. They are printed with a 0,4 mm nozzle and a 0,2 mm layer height. To ensure a good…
Prevent your laundry bottle from dripping on the floor and/or hold the cup underneath. This is a remix of: https://www.thingiverse.com/thing:4924564 I modified it to fit my style of wire shelving
Wireframe wolf not made by me. Posted with permission. Highly recommend printing with the base or making your own from the .obj as it sits uneven. Print Settings Printer: Printrbot Simple Metal Rafts: No Supports: No Notes: I don't…
This is a wireframe Jigglypuff i made when learning a new technique on meshmixer, I had pink in the machine, ....so Jigglypuff. I include two versions the large one from the pictures that is ~150mm and a smaller version with thicker lines…
This is a 3d scan of my hand that I turned into a can holder in Blender, It prints easily without supports, and works great as an art piece, or even a conversation-starting coaster! It features a life-sized hand, and is scaled to fit a…
Classic Ford RS Wireframe Wall Art – 3D Printable Model Introducing our 3D printable Classic Ford RS wireframe wall art, a must-have for aficionados of classic rally cars. Immerse yourself in the legacy of rally racing by showcasing this…
A 50mm wireframe sphere, please note that the model WF_sphere_50x50_ad.stl reflects the render images and it uses an adaptive thickness algorithm, however it will be quite challenging to print, so I suggest to print WF_sphere_50x50.stl…
Wireframe stylized cat sculpture Modelled in Blender Layer Height: 0.2 - 0.3 mm Can be mounted on wall or door. Enjoy!
This model features a wireframe Rhombic Dodecahedron , designed in CAD and refined through an iterative process to form a Level 1 Sierpiński Octahedron fractal structure . It includes a seamlessly attached base and prints without…
a wireframe model of an easter egg with chicken feet. printed using resin but should also work for pla or other material
That this model pushes the limits of angles that are possible to print, at the base of the model. No supports needed. The model is fairly clean and should have no problems on any slicing software. I would recommend not printing at a scale…
Hey there! I made this < 43cm (16.93 inches) wall art that can be printed in one, two or even three pieces, so it's printable in its original size on smaller 3d printers aswell. However if you'd like to scale it up or down, go ahead! The…
This model features a wireframe Rhombic Dodecahedron, designed in CAD and refined through an iterative process to form a Level 3 Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring…
2020-03-28: some of you wanted access to the source file. I've uploaded over at thingiverse since this site wont let me upload the .iges file. https://www.thingiverse.com/thing:4229703 2020-03-27: delivered the first batch of 100 shields…
A great model from Eastman. Now remixed to voronic and wireframe for resin. Who dare to try on FDM? LoL Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Very beautiful Deadpool…
Now my debt is paid It is paid in full By the precious blood That my Jesus spilled Now the cuse of sin Has no hold on me Whom the Son sets free Oh is free indeed Oh that rugged cross, my salvation Where Your love poured out over me Now my…
📖📚UPDATE📖📚 New shapes available! Please take a look at the OpenBook folder for everything new. As the name implies, these are open books in the same style as the original collection, with 4 different open angles and a hex and rounded…
A three-dimensional tribute to Canada's Sesquicentennial logo. Now you can wave both the flag and the leaf! The Canada 150 logo was originally created by Ariana Cuvin from Toronto, Ontario. The logo was the winning design in a nation-wide…
You can use it as jewelery or for your cristmas tree. The wireframe version is for sure hard to print, but maybe with a resin printer it should be possible. The combined will look great in e.g. black and white like on the render picture.…
For more mathematical details on the hyperbolic paraboloid, please refer to https://mathworld.wolfram.com/HyperbolicParaboloid.html Two files are provided. One is the “clean” version without any supports, and the other is already prepared…
This model features a wireframe Rhombic Dodecahedron , designed in CAD and refined through an iterative process to form a Level 2 Sierpiński Octahedron fractal structure . It includes a seamlessly attached base and prints without…
Each circumscribed radius is set to the same. ref) https://dmccooey.com/polyhedra/Archimedean.html Truncated Tetrahedron Cuboctahedron Truncated Octahedron Truncated Cube Rhombicuboctahedron Snub Cube (laevo, dextro) Icosidodecahedron…
Printing Information: Use tree supports to support the frame. Can be printed with only supports on the star's lower points, but I recommend supporting the frame as well for a cleaner result. Supports will be a bit annoying to remove, but…
Wireframe print. Seems to consistently print round-ish balls with this gcode. Would appreciate feedback with other printers. Send a message to request modifications.
maybe a little early, but you never know when inspiration hits :D found a large steel wireframe tree in some random home decoration catalogue and decided to make it smaller and printable prints in multiple parts, support free I sized it…
This is a real airway (trachea and bronchi) remodeled as a wireframe mesh The airway is from anonymised CT scan data (with consent) Great for display in clinics SLA (big machine) printing is recommended
Inspired by the style of wall-art deer by BeppelTA, I wanted to do the same, representing the monstrous Leshen from The Witcher 3 video game. I think it's alright, and I hope you enjoy it. Note: Printed example photo now included.
The famous infinity cube in full wireframe! After creating the fidget cube in wireframe as light as possible ( see my other model ) I created this variant with an inner cross inside the cube for an interesting look. The cubes can be…
its a model plane art to stick to walls
Notes: There is no universal cook book how to print all of my eggs, but I will tell you all of importants. All of the eggs have little plane on bottom. Brim is recomended! Voronoi Eggs Set travel speed to 200 mm/s Increase retraction (on…
Needs to be printed with supports. A wireframe shark for placing on a desk or an a wall. Available in 3 different sizes. New: The complete shark in 2 sizes available too.
Nexus Bowtie 3D Printable bowtie, with a connector for 20mm straps/bands. There are 2 versions, a flat version ideal for a flat top finish, looks great with ironing on top surfaces, and a version with inclinated faces to highlight the FDM…
Wireframe skull to hold pencils or other items
A great test for your printer to see if you can dial it in against stringing etc… Print the heart standing up with supports up to the first horizontal wires (like ~2cm high) Picture sample is ~20cm high printed in PLA layer height is…
Wire Frame cow head, made based off of 'Cow Head' at The Islington Museum, London. Made using the Scan the World upload. Category: Animals
As Christmas is around the corner, I wanted to make some special balls to serve as decorations on my Christmas tree. So I played with some meshes and obtained these two nice results. While these do not have a traditional voronoi or…
This started out as a Fusion design exercise on a wet and windy day. As drawn it is approx 180mm diameter and 70mm tall. I wasn't sure if it would print well so tried a 50% version (white one in photo) but that worked perfectly in PLA…
owl low poly wireframe 0.2mm layer height
This is a chinese lucky cat / maneki neko that has a wireframe on the outside which gives it a low-poly effect. This lucky cat was remixed by myself for my channel. You can find the video here: https://www.youtube.com/watch?v=RCuHULOjM10…
NO-AI (HUMAN MADE) Paint supports (critical areas only) Personal use only. Do not redistribute! It is absolutely not possible to download this model and upload it to different accounts or platforms. I'm Crealitale - Tasty Voxels; other…
Second Model (Wireframe-Style Rabbit) This 3D model of a rabbit is displayed in wireframe mode. It consists of thin, connected edges forming an open, lattice-like structure. The mesh is mainly composed of triangular and quadrilateral…
Easily printable tray with a stylish wireframe pattern! Printed at 0.2 layer height with ZIRO Mist Matte filament.
I like the wireframe spriral organizer and it looks like a vase. But a vase with wireframe it not really possible. So i decide to remix the original model and add a small tube inside. When you look to it, you have to search for the tube,…
Soap Holder Old Style - Porta Saponetta Classico Resize/Scale to adjust dimension If you download/enjoyed this file, please leave a like - Thx
Simple As, use it as it fits your Purpose. Category: Scans & Replicas
Wireframe modifier + subdivision with crease disable = smoov brain Not my proudest topology, but it works How I Designed This bender Category: Models
I'm planning on building this and upload a guide thing to youtube, so if I do I'll update this with a link. to print this yourself, you need to print out anything that says half in the name twice, print the pin 3 times (you wont need any…
Designed as a companion to my Hanging Network Rack Mounting Bracket for Wireframe Shelf , this bracket helps support the network cables behind the hanging network rack by adapting the traditional D-ring style cable management organizer…
A dimensionally accurate model of a DSOX1204G Keysight oscilloscope with a minimalist frame. Warning! The lines are very thin in some cases, and you may need to play with your feature size settings for them to print. Ideally I'll come…
hols 2 bars of soap is in inches. no supports needed. Category: Bathroom
I remixed the original model from @EddiePrints because in my opinion the M4 screws are to big. Now there is a M2 and M3 version. The new holes allow to put the screws right through the whole model and use nuts on the other end. I prefer…
A klein bottle with wireframe style so the whole surface can be seen. With a solid surface the bottle looks not so exciting and the meaning is difficult to understand. So I made this version. It prints without support, but isn't very easy…
"Wireframe Skin” is the simple combination of the low poly model and the Wireframe model that was made from it. This hybrid has the advantage of being much easier to print while also keeping the main aspect of Wireframe. You can print…
WIND CHIME “Extremely Wireframe” I took part in the “Wind Chimes” competition in May 2026, where I came 7th. But whilst I was modelling the project, I had another version of the model in mind. I used Blender’s “wireframe” modifier, which…
The wireframe F-4 as seen on my F-4 Phantom II keychain. Based off of the F-4 wireframe created by Heatblur Simulations for the promotional material for their DCS World F-4E module.
Variant with balls on corners added.
This is, admittedly, a pretty niche solution to a pretty specific problem, but it works for what I needed. I was looking for a way to move my 24-port network switch off of my homelab wireframe rack shelf to make room for new equipment,…
An eye-catching pen cup. Its wireframe nature was inspired by wireframe textures in videogames. It holds a fair amount of pencs and pencils. Stands at 125mm tall. Does not require supports, but if your printer cannot handle overhangs you…
Printing Information: Use tree supports to support the wireframe structure. Use a brim, since its contact surface with the printbed isn't all that much.
I've been thinking about trying to make a wireframe heart wall hanging but wanted it 3d rather than just 2d. My CAD skills were found seriously wanting so it's real rough, but I wanted to at least see how it turned out. Done in freecad…
Just wireframed / subdivided / tweaked the lizard-bear to be a reasonable light. Prints well enough with minimal supports. Technically might print with none, but I haven't tested.
Organizers and holder for pen or toothbrushes and so on. Doesnt need support.
Wireframe of a platypus hummingbird. Inspired by the discussion on this thread https://www.reddit.com/r/3Dprinting/s/zDvC2tA6WU Printing requires some supports, but best to not support the inside unless you want to be digging around with…
Introducing a new texture to our collection! This set moves away from soft ribs to a sharp, modern knurled (diamond) texture . The detailed geometric surface interacts beautifully with light, giving the vase a premium, industrial-chic…
Mona Lisa Geometric Wireframe Low-poly Wall Art, roughly A5-size.
I had a Nespresso capsule holder for a while but now that they are changing them so often, i can't remember what's what. So i made some label holder to put in the relevent part of the cardboard box. it's a simple design but it work very…
Template for wireframe disigns in blender
This wall-mounted shelf is designed for small plants or decorative items. It features an open wireframe structure, may be used for hanging LED string lights as shown here. The shelf is compact, easy to print, and simple to install. It…
While previous working on Voronoi models, I always realized how much more difficult it was to print than a regular print. It was therefore reserved for those with experience but also those with better machines, which is a bit sad. I…
This is a wireframe form vase/planter. I use standard print settings for a Creality Ender3 Pro.
I made this model in order to explain the intuition behind the voronoi technique. Voronoi is essentially wireframe on the dual version of the mesh. (Image from: Tang, Qian & Ren, Yu. (2020). Preliminary Discussion on the Refinement Mesh…
The Steam Machine is owned By Valve, and I'm not associated in any way. For the official original Design File of the Steam Machine look here: https://gitlab.steamos.cloud/SteamHardware/SteamMachine/cad-release This model is not Printable,…
Variant with refined version of mesh. Resize as you like.
Quick start For a single m x n drawer box, the required parts are: one back part of dimensions m x n , with all four sides female ("ffff") m+1 side parts of size n , with both sides female ("ff") n+1 shelf parts of size m , with both…
Conical vase with wireframe case holder
Choose an arm style from the options shown above. Print 24 identical arms and 2 clamps to assemble one bowl. There are two clamp variants : one for use with the assembly tool, and one clean version for assembly without the tool. Only one…
Set of two wireframes of Joel Embiid.
![Wireframe Christmas Tree [no supports] - Bridging and No stringing challenge](https://media.printables.com/media/prints/655442/images/5166896_79daec47-c56b-4714-a9fe-e8b3f3ae71c2_a6a220e6-3731-44b5-a6be-cbd25e714454/snimek-obrazovky-2023-11-22-022708.png)
