786 modeli
Cute baby Huggy Wuggy figure. Multipart ,easy to print. All parts are supportless. On eye pupils use color change at height. Tolerances set to 0,1mm. Printer setup: Nozzle diameter 0,4 10% infill Layer height 0.20mm no supports
I Put 100% infill for better strength.
My children love the small mole (Krtek ) and when my wife said we needed some coat hangers for our kids coats - i knew what to design :-) Made 2 versions - one with the bunny and one with the mole. I printed it with PLA and it holds the…
Zweite Auflage, da die erste recht gut ankam. Anhänger zum beschriften mit DYMO Klebestreifen (12 mm breite) um Schlüssel oder andere Sachen zu kennzeichnen. Ich habe die Außenkontur etwas verrundet und 2 weitere Größen hinzugefügt (20 u.…
Due modelli uno con texture. buon divertimento!!!
Rack for storing up to 3 grating and slicing discs in a vertical position. These are made for the Vorwerk Thermomix accessory WunderSlicer by wundermix (V1 and V2). Ideally for storing them inside a drawer or kitchen cabinet / cupboard.…
Made the model for my girlfriend because there is no model for it available. Made in Blender - f***ed the scaling up because of it. its saved in inches for whatever reason so just hit yes if prusaslicer asks you if its saved in inches.…
The Wu letting you know you rollin! Protect ya neck with this killer bee of an add-on. I printed it from Matter3D Basics sun yellow PLA: https://www.matter3d.com/products/basics-series-pla?variant=42420619772081 0.40mm nozzle 0.15mm layer…
Idee: In unserer Dummy-Trainingsgruppe werden an einem normalen Trainingstag etwa 40 Dummys von 8 Besitzern verwendet. Am Ende werden die dann untereinander wieder getauscht. Das dauert sehr lange, daher wurde eine farbliche…
My children love the small mole (Krtek ) and when my wife said we needed some coat hangers for our kids coats - i knew what to design :-) Made 2 versions - one with the bunny and one with the mole. I printed it with PLA and it holds the…
Decided I want to pimp my Prusa MK3s+ up a bit so I hit it with the the Wu Tang treatment. It saddles over the top of the frame, with room for the factory Prusa spool holder to fit. Printed in PLA 0.40mm nozzle 0.15mm layers print face…
Beim Weibchen (ohne Helm) kann man ein Stück Stoff um die Hüfte kleben (als Rock). you can glue a piece of fabric around the female's hips (as a skirt).
I remixed the Wushu grip from Maverick0197 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Maverick0197:1/WushuGrip:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1-0.2mm Infill:…
Dies ist wie der Name schon sagt ein Auswurf Behälter für den Bambu Lab X1C/P1P/P1S
NEW SIZES AVAILABLE HERE: https://www.printables.com/model/778060-screwu-nit-hardware-organizer This is a reimagined remix (HUGE UPGRADE) of the great Modbot Voron Hardware Organizer. (More Drawers can be found on Thangs) PRINT SETTINGS:…
This is a model of the black myth Wukong, imported from Thingaverse. I glued the printed pieces together using super glue.
AR style grip with a beaver tail and 12° angle. Multiple versions and STEP files. Update 05/01/2024: Added V2 & V2 No Beavertail. Adjusted some angles and geometries, should be a little closer to its namesake. Update 12/18/2024: Added…
simple print but make sure you have a raft on if you tend to have bad bed adhesion, other than that you're good. Have fun!
YOU ASKED FOR IT! 3 NEW Sizes! Original 4x7 ScrewUnit available here: https://www.printables.com/model/774134-screwu-nit-hardware-organizer ScrewUnit! A hardware parts organizer where size matters. 4x6 4x5 4x3 Added drawer stops!!! Don't…
This insert will hold 5 M12 Batteries (3 CP Type and 2 XP type) and the standard M12 Charger in a Milwaukee 48-22-8435 Packout. It is offered as a single model and as two pieces that can easily be printed on most printers. I print this in…
Wushu Grip hollowed out remix; custom grip textures
Please upload makes - it's how I afford my filament and improve my design! This Dust Cover is designed to fit the new Milwuakee M18 Fuel Track Saw and prevent dust blowing out of the arbor port. I designed it to use the saws own allen key…
a simple ragdoll of huggy wuggy. you also will need to add supports for this model.
Cute Teddy Bear for decoration or to test out the Fuzzy Skin feature. Fuzzy skin g-code included!
This is a remix, but I cannot find the original post anymore. This model flipped the Jinggubang (the staff) so that it looks more realistic by gravity, want to ensure its orientation reflects a natural downward position, angle to account…
Das Frisbee ist sehr leicht und hat tolle Flugeigenschaften. Ich habe es so konstruiert, dass es auch von kleineren Kindern leicht geworfen werden kann. Beim Wurf muss die die Seite mit dem Rand (der Erhöhung) nach unten schaue. Somit…
Un llavero de Huggy Waggy fabricado en PLA, altura de capa 0.2 y función cambio de filamento (M600) Imprime con moderación.
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Focke-Wulf is very realistic Print in place kit card , Assembly required
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ You can buy this frame as a kit at cncdrones.com, it have the arms and cam plates…
Custom made for my Wusthof whetstone (ref 704773), here is my sharpening device ! Inspired by some i found here, i made my own, according to my tastes and needs. I purchased the stone online on knivesandtools (24€ + shipping) , very happy…
I really liked V1 of the Wushu grip by @MAverik0197, but I awaus prefered the stipple pattern of the @SCout339 version. So when Maveric was kind enough to release a hollow version of the V1 upon my request ,I decided to make a hollow…
https://wuuya.net/tree/ I recommend to use vegetable oil, so the concrete do not stick to the molds and the molds can be used again. To make it longliving just use a chain inside the concrete. The minimum sice of the prindbed to print…
This is my design of an elegantly swung hook to hang clothes or bags to a clothes rail. I designed it to provide a classic shape but with a simple and functional profile. How to Print the Hook Print the hook on its side. Larger hooks…
Simple Case for the Whuzi ZK-1002T 2x100W Amplifier Print Settings Printer: Elegoo Neptune 4 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Filament: Elegoo Rapid PLA+ PLA Grey Category: Music
Je nutný nastavit v prusasliceru přidat změnu barvy ve výškách (2.8 mm, 3.2 mm, 3.6 mm a 4.0mm). Více napoví fotografie v galerii.
在《黑神话：悟空》中，青铜猴子面具具有多层含义，与游戏的世界构建、角色和叙事密切相关. 古老的力量和智慧：青铜猴面具通常与古老的力量和智慧有关，象征着悠久的历史和神秘的知识。它可能代表了 Wukong 寻求的力量和智慧的源泉。 文化传承：铜猴面具作为具有古老文化符号的文物，也象征着对传统文化的传承和尊重。它可能会将游戏的神话背景与现实世界的文化遗产联系起来。 身份和象征意义：青铜猴子面具可以代表某种身份或符号，揭示角色背景或与他人关系的各个方面。这可能与 Wukong…
Inspired by the Wu-Tang ashtrays and other desktop organisers, I made this general Wu-Tang Clan themed tray for storing odds and ends on your desk. Use it as an ashtray, store MicroSD cards, organise your M&Ms into colours and use each…
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Design updates 05/2022 : added the simple session mount + TwistLock powerlead…
This is my interpretation of the typical German Klappdeckelwagen K 06 “Wuppertal” or ”Sachsen" in Gauge 1 (1:32). This is the simplest version, without brakes. A version with brakes and a “brakemen's shelter” will probably follow soon.…
For the Milwaukee packout system with the “rail” addition you can add M18 batteries. The rail is 1 ½ inches by 1/8.
After finalizing the simplest version, without brakes ( https://www.printables.com/model/423881-deutsche-reichsbahn-deutsche-bundesbahn-k06-klappd ), it took little effort to create this version with a “brakemen's shelter”. All items that…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
See how to create 3d models from AI (image-to-3d / prompt-to-3d) here: https://www.patreon.com/posts/how-to-use-ai-to-120617822 Models in this collection: Frogfolk / Grung / Bullywug Monk (although NPC or other could work too!) Frogfolk /…
Classic Italian Arm Gesture :D Thanks to original model : https://www.thingiverse.com/thing:5849441
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ DISCLAIMER : i had to set my ESC to 48 KHz to get the stabilisation to work on…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
this was my first ragdoll huggy wuggy so it ain't that good
Modelo originalmente subido en https://www.thingiverse.com/thing:3521726 Es perfecto si buscas un Monstruo de baja dificultad para tus partidas de dnd! Impreso en Ender 3 y pintado con Acrílico: Boquilla: 0.4 Calidad: 0.16 Soportes: Si,…
So wanted to do a Wu Tang Project as i've been on a old school kick for awhile, and they really dont fit the rockmetal guitar picks too well. may still happen. Well Its 2022, its the 30th Anniversary of The Wu, 25th of The Album Forever.…
Small part boxes that will fit wurth orsy inlay
Extrusion der Grinsekatze aus Alice im Wunderland. Habe zuerst Glow in the Dark Filament genommen dann einen Filamentwechsel in den G-Code eingefügt und den Rest gedruckt. Meine Frau hat sich gefreut. Viel Spaß beim drucken
在《黑神话：悟空》中，“恐怖之火夜叉面具”是一个具有重要背景和意义的深刻象征性物品 恶意和挑战的象征：Dreadfire Yaksha 面具可能代表游戏中的邪恶力量或挑战。夜叉在传统文化中经常被视为凶猛的恶魔或守护者，而这个面具可能象征着与这种强大力量的对抗或需要战胜。 角色和背景洞察：蒙版可能会揭示游戏中某些角色的背景或故事情节的各个方面。它可能与敌对力量或历史背景相关联，反映人物之间的冲突和关系。 文化和神话元素：…
owo, what's this? A joke became realty, and the SUBUWU is out on the road to the disgust and delight of many. Scaled 1:1 for a 2014-2018 Subaru Forester I dreaded the idea of aligning the letters, so when I developed the model in Fusion…
Hello i use this holder for my M18 impact but i little adjust holes pitch to fit wurth tool wall also i rotated the tool position. Recomend print from PETG - 5 perimeters 20% infill I mount it on this:…
Both versions are 200mm (199.0440mm) in diameter and 4mm tall in total. The text and border wall are 1mm thick. The Standard Wu has the original thin text and if you scale it down the detail in the text will go away. I made a version with…
"Ich hätte gern ein Stück Fleisch , .............. aber ohne Fleisch ! " Hmmm....... vielleicht eins vom Baum? Oder vom Feld? Nein ich weis,…..hier eins aus dem 3D Drucker, garantiert ohne Fleisch! Ich fühle mich verar....t wenn ich z.B.…
Tired of always having the packaging always attached to the famous Arbre Magique or Little trees or Wunder-Baums scented tree, I designed a shield that is less cumbersome to the eye and to safety while driving. The parts to print are very…
I've Made a cool little keychain, based on the "Little Tree" (Wunderbaum) air freshener for cars. Printed with 100% infill at 0.2 layer height. Nozzle: 0.4 / Number of wall lines: 1 Hier ist einen cooler kleinen Schlüsselanhänger,…
Force token for Star Wars: Unlimited – Legends of the Force. Place in play area face up when you have the force. Flip or remove it from play area when you lose the force. Model is the same size as the Gamegenic Initiative, Blast, Plan…
Diese Siebe ergänzen mein System zur Mehlwurmzucht: https://www.printables.com/de/model/647981 Sie dienen zum Sortieren der Mehlwürmer nach Größe. Mehrere Siebe können übereinander gestapelt werden und zusammen auf einen geschlossenen…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Awesome Ewok character with blaster and thermal detonator! I printed in .12 layer height with supports and used a 28mm mini base. Great return of the Jedi vibes. Have fun. Please give the original creator their due credit.
Wubbaboo from Honkai Star Rail keychain
Pi Pico Sumo/Battlebot using a Wukong RP2040 breakout board. This is a working progress, so for now, here are the print files for the chassis and the 8T (16T including both sides) and some basic control over WIFI. Using a web browser, the…
Wu-Tang inspired 45 record adapter.
Heckmeck am Bratwurmeck / Pickomino Dice Game Print instructions Everything is printed on 0.15 layer height quality profile on a Prusa Mini. For the stones you need a filament change twice to have a coloured imprint. The imprint is 0.75mm…
This accessory slides onto the end of the Wuben G5 flashlight and serves in place of the keyring or lanyard hole, allowing use of the magnet feature without obstruction. Just slide this onto the magnet end of the Wuben G5 and attach to…
Uses the screws and spacers that came with the amplifier board kit. Steps to assemble: 1. First prepare the top part by fastening the spacers with 4 screws on it. 2. Place the board into the bottom of the enclosure 3. Slide the top part…
Huggy Wuggy - Llavero - Poppy PlayTime
Adapter to fit an M6 Wurth rivet nut into the lateral hole of the Qbrick System Pro.
Model created in zbrush, maya and 3ds Max. It is watertight and ready to print/mill. Although there are some minor cuts, it is made with molding and molding in mind. 3d model used for statue casting, cnc sculpture, 3d printing... The…
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Get the frame on CNCDrones (CNCMadness) [ The Wu Tank - w/ hardware, configurable…
Modified https://www.printables.com/@DigitalTools_2541166 excellent rail mount for an extra clothes clip that allows you to mount the Wuben G5 upside down. I found it hard to get the light angled far enough down for those dark night time…
Es ist ein Remix von 6mm Doppelt Thera Tube Silber auf einfach 10mm Thera Tube Silber .
note: This is not my design. My name is Eric and I'm a long-time volunteer with eNABLE (you may have met me at ERRF/3DPrintopia). I am curating eNABLE designs to share with the Prusa Community. As an official representative from eNABLE…
This is another version of the Widdle Wadder. It fits 8mm x 2mm rare earth magnets. I made this one a 5-step model and rounded the edges. Printed in PETG with no supports. UPDATE: The magnets were starting to scratch the paint, so I added…
Fahrrad Bowdenzug- Kabel- Klemme / Clip; Rohrdurchmesser z.B. Lenker: 22,5mm / 25mm 2x Kabel: Durchmesser 3mm; 1x Bowdenzug Durchmesser 5mm. Verschidene Bowdenzug- Kabelklemmen für die Befestigung zwischendurch. Zur sicheren Befestigung…
Dimensions (mm) : 43 x 45 x 125 I used around 27 grams of filament, supports must be enabled
These cable ID clips snap onto xConnect and Ray Wu connectors to identify rgb lighting cables. They're great for rgb smart pixel extensions and pigtails. Print: Printed on it's side with the flat surface on the build plate. Printer: Prusa…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Wugtrio, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
A gridfinity tray for the Wurth AS 4 electric screwdriver 5701300024 Should also fit the bosch go screwdriver!
a friend told me how its a shame kuro is not selling scars cards so i took it to myself to make her the cards
12mm pegboard, like Biltema, holders for Wurth / Bosch 10.8V (guess 12V too) battery and cordless screwdriver.
Wu-Tang Clan Spider-Man Face Shell 1.-Sizing - The Helmet may need to be sized for your needs, as it is roughly sized to fit a Average male I recomened using my FREE Heads for Sizing here ----- https://www.thingiverse.com/thing:4885210…
bom 3 x m3x25 SHCS 3 x M3 Threaded Insert 1 x 5525 dc jack Print flat sides down
This is a Skadis hanger for the new packout version of the Milwaukee Shockwave bit cases. The only hangers I could find online were for the older style that had bigger rectangular cut outs. The newer cases have smaller cutouts that are…
I had to make the line thicker to be able to print the details with a 0.4mm nozzle, afterwards I filled the lines with paint and removed additional paint with IPA.
No screws required, 2 clamps are used instead to hold the 2 enclosure parts together and also serve as feet. Steps to assemble: 1. Place the board into the bottom of the enclosure. 2. Place the top of the enclosure over the bottom one. 3.…
Baby Wulf, Hexa Sculpture
Würth Abrasive Disc Holder and Alignment Aid Introducing the Würth Abrasive Disc Holder and Alignment Aid – for a better (looking) work flow! Storing all your abrasives neatly and easily accessible has never been easier. Grab the right…
Added a loop to the original object so it can be used as a Christmas ornament, or hang on a chain.
Hallo Zusammen! Hier habe ich einen faltbaren Petanque Abwurfkreis mit einen Innendurchmesser von 50cm. Die äußeren Pins müssen etwas eingepresst werden, weil sonst der ganze Kreis zu locker wird. Anschließend werden die Pins ineinander…
If you are already making a Huggy Wuggy with your own sewing patterns then this is for you! This only includes the face parts I used to make my Huggy Wuggy plush. When preparing the eye for printing, be sure to add a filament change at a…
The headlamp mount for the Wurkkos HD15 flashlight. With this mount, it is much faster and more convenient to mount the lantern on it. It is attached with a click and holds securely. The ribs on the mount do not allow the lamp to move. It…
A supportless model of a dwarf fighter, alternative version of Muln the Dwarf Rogue. Wurn is equipped with an axe, a shield, and chainmail armor. By default the model is scaled to fit with other 28-32mm miniatures. Printed on an FDM…
