4621 modeli
Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena jednego wariantu
BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Want to save money for the new awesome RTX3080? Here is the perfect piggy bank to keep you motivated! Kikiina asked me to make this design so she could who give this to her boyfriend who is saving money for a RTX3080, so thanks to you for…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Dübel d6-D8x39 8Stück Ich empfehle PETG und 100% Füllgrad. Der seitlich angebrachte “Flügel” ( Verdrehsicherung ) gehört beim Druck natürlich nach unten. Bei Verwendung von ABS, PC oder Nylon kann es zu Warping beziehungsweise…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
About The most common sizes (length × width) are 600 × 400 mm and 400 × 300 mm, which can be stacked together to fill a Euro-pallet measuring 1200 × 800 mm. This model is 1:10 scale.
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Print Settings 0.4mm 20% infill Support - Touching Build Plate Scale to 10% design is 10:1 to allow for detail. Can be printed with support and face down for quick/draft prints in under 1h, or with support face up for higher quality…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
I love the original fish magnet from kennyd1gital but I don't have the exact magnet size, so I made this remix for 8x3mm magnets. You can stick a maximum of 3 magnets in, but in my opinion 2 are enough :) Please also give a like to…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
It would be nice if you post your make. Thank you
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…
Wydruk około 7,58 €–9,26 € nettoWstępna wycena jednego wariantu
Fits onto the misumi 3030 extrusions with the 6.8mm hole and 8mm slots. Held by the middle pin and fixed against rotation by the small standoffs.
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
I have some OpenRC F1 cars that are only being displayed and won't be driven (anymore). I didn't want to waste actual bearings by having them sit on the car, but the bearings are required for the wheels and axels to fit together…
Wydruk około 0,03 €–0,04 € nettoWstępna wycena jednego wariantu
A 3x3 base to keep your Vallejo (and Army Painter) bottles organized. Oooh, look, they stack too!
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Hi there! This is my own take on a 3-model squad base for 32mm diameter base miniatures. I use these for my older style Blood Angels space marines for Warhammer 40k, but these would work for just about any game using minis on the same…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
Nice and detailed Wall Art model of the BMW X3 M Competition 2022. Scalable. I accept suggestions for new car models
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
Very strong case for Lexus RX400h, RX400, RX330. Uses transparent glue to securely hold the case together. I prefer glue because screws and nuts are not attractive for this kind, small detail. Case will not flex and very strong when…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Hi there! This is probably the silliest thing that I've ever printed. I previously made squad bases for 25mm & 32mm diameter minis, but thought that it would be neat to see if a 3x 100mm squad base could fit on my MK3+ print plate. It…
Wydruk około 2,97 €–3,63 € nettoWstępna wycena jednego wariantu
Das ist eine kleine wunderschöne Ring Box für Verliebte, Valentinstag, Verlobung oder für Hochzeit mit Herzlogo und verdeckter Innenscharnier. Sehr praktisch auch für Hosentasche oder kleine Handtasche zum mitnehmen. Für Lovers ein…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
This is a remix of the remix of the remix of the original - using the lift away nozzle holder and bucket inside the bucket - but going back to the original 6x3 magnets, which is what I had since they're used on all the other Voron stuff.…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
Gridfinity 2x3 bin holder for the modula system The holder has room for 2x3 gridfinity bins. Print with 15% grid/gyroid infill and grid support from build plate only. You need 1 adapater biltema (or vanilla adapter ) to peg board/wall…
Wydruk około 5,87 €–7,17 € nettoWstępna wycena jednego wariantu
Universal Garmin Navi Halter besonders für Etrex 30 und kompatible Modelle. Die Befestigung erfolgt mit einem Velcroband - passt also auf alle Fahrradlenker.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 36pt mesh is constructed of 36 16.5mmx16.5mmx0.2mm squares in a 6x6 grid with 1.65x280x0.2 lines connecting each grid element to provide…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
A simple box for desicant material, i've put it in an old cigar humidor converted in filament dryier box. Printed in Pla with Cura 5.6.0. slicer. Printer Ender 3.
Wydruk około 5,35 €–6,54 € nettoWstępna wycena jednego wariantu
A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Bonsai display table 09 square 150x150x37mm, support is necessary. Feel free to scale up or down until you like the result and it suits your tree.
Wydruk około 16,21 €–19,82 € nettoWstępna wycena jednego wariantu
Stackable Insertbox 3x2 units in footprint, full height compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below this variant is available commercially as injection molded parts, and probably easier to…
Wydruk około 3,87 €–4,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For M33x3.5 sized woodturning chuck, to rest it on the wall Print instructions Printed in ABS or ASA, reinforced with a 23 mm dovel (the chuck is quite heavy) glued inside the part Slice in 0.3 mm
Wydruk około 4,47 €–5,46 € nettoWstępna wycena jednego wariantu
A small seahorse
Wydruk około 2,17 €–2,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Holds 15 spools of thread that are 19.2mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Holes are 19.7mm to easily…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena jednego wariantu
I added spacers to a 4x5 Gridfinity Spacer to fit into a Bisley Style No Name Desk Cabinet with 23.5 x 38 cm drawers (inside Measure) You need two of those Grids to fill the drawer. My first model/remix so feedback is very welcome
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
A purge bin for the CoreONE system, equipped with a cutout for a wiper and designed to hold 3 10×3 mm magnets.
Wydruk około 2,14 €–2,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1992 Formula 1, Pre-Season Testing The life of a successful modern Formula One car starts with the germ of an idea, a creative spark, a flash of brilliance. It rapidly moves to exploration in a digital world where simulations are run and…
Wydruk około 5,43 €–6,63 € nettoWstępna wycena jednego wariantu
Alu Profil Abdeckung 60x30
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
This is a shroud that magnetically attaches to your Turbofan X3. This fan can be bought from many vendors online, but I recommend using aliexpress for the cheapest price - it's literally the same product. This thing moves serious amounts…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
A 3x3 grid which follows the bottom shape of the verstegen spice/herbs bins with a 4x4 gridfinity bottom.A 3x3 grid which follows the bottom shape of the verstegen spice/herbs bins with a 4x4 gridfinity bottom. Printed the one on the back…
Wydruk około 5,28 €–6,46 € nettoWstępna wycena jednego wariantu
A Mini Scraper version 2 with an embedded 6x3 mm magnet. If you use the provide Gcode for a Core ONE it will stop at the layer needed to insert the magnet. If you aren't using that you can easily add a pause in PrusaSlicer. I used a 30%…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Design Requirements A simple gridfinity container that holds reusable grocery bags Printing Setup Printed with PETG using a .4 mm nozzle and no supports First Impressions The bags fit Attribution ZackFreedman - Gridfinity gdie - Freecad…
Wydruk około 9,99 €–12,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We have few thousand Duplo bricks at home and it's a lot of fun to play with them. My kid love to play with 3d printing so I have modeled a basic Duplo brick and I try to use it in my own custom designs as a basis for further…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stackable Insertbox 3x2 units in footprint, 1/2 height, 2x3 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-22 v2.2…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted an X axis belt tensioner for my Anycubic mega zero 2.0 and ( Tronxy X3 x-belt tensioner ) almost worked so i made this which works perfectly!! Printing instructions: 0.28 pla infill 0% 2 walls supports
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
XYZ Calibration Cube 30x30x30 Fillet and Chamfer
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
CZ (EN version follows): Potřeboval jsem připevnit výztuhu k rámu své tiskárny. Běžně dostupné tištěné T-nut (asi tyto ) se lámaly, kupovat čtyři matky přes internet se mi nechtělo a v železářství se jen tak nedostanou. Inspirován…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Die holder for lathe tail spindle with 22mm diameter and dies with 25mm diameter.
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
Stackable Insertbox 2x3 units in footprint, 1/3 height, 5x2 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-27 v2.3…
Wydruk około 3,13 €–3,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stackable Insertbox 2x3 units in footprint, 1/2 height, 5x2 grid with label holder in each partition two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link…
Wydruk około 3,97 €–4,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
made it easier to take out by shifting the sheet a little. It is recommended to fix it with double-sided tape.
Wydruk około 2,71 €–3,31 € nettoWstępna wycena jednego wariantu
HPE Proliant ML150 Gen9 3x3,5" HDD adapter Adaptér pro instalaci 3ks 3,5" HDD do prostoru pro 4 HotSwap disky 4ks HeatInserts M3 x 6 x 4,5 4ks šroubky M3 x 6mm pro montáž adaptéru 4ks šroubky W 6/32 x 6mm pro každý z disků (průměr hlavy…
Wydruk około 15,04 €–18,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cable chain system with 50x30mm internal cross-section. Cables and chain links can be inserted through a simple clip. Bend-angle on a single hinge: 45° upwards, 30° downwards. 80mm bend radius. Your printer should be able to print 0.2mm…
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
This is an external mout for 2 row goldpin block. You can use it for servo connection or oter purpose. It has a holes for M2 screws. Printed with support for clean inside and good insert clearance.
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified magnetic clip for 9 Prong WDT Espresso Tool that uses 8x3 magnets instead 5x2 magnets used in original design.
Wydruk około 0,19 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holds 4-5 DVDs/CDs in each tray. Finger holes for easy extraction. Stackable. I don't retain too many DVDs these days, but this keeps them where I can find them when I need them. The DVDs fit snug enough that they shouldn't scratch each…
Wydruk około 4,25 €–5,20 € nettoWstępna wycena jednego wariantu
English (Deutsche Beschreibung siehe unten) I offer the hex-bit-storage in several variations : This version offers room for the Parfguide System Mk 2 bits and tools. Other variants are: 7 x 3 bits only 8 x 3 bits only 8 x 3 bits plus…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
A complete kit to mount the Topping MX3s Amp+DAC, Remote and Power Supply neatly on the underside of your desk, or anywhere else you'd like to put it! Other Topping Amps / DACs These parts were designed for the MX3s. However, some parts…
Wydruk około 6,37 €–7,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Držák mobilu do auta, na koupený držák z Aliexpressu. Velikost je na mobil POCO X3 NFC
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since I don't own a Pinecil, but otherwise liked the Omnifixo Pinecil Case design by @PosterBored a lot, I replaced the Pinecil compartment with a generic compartment. I also had different magnets on hand (5x3 cylindrical), and I prefer…
Wydruk około 5,53 €–6,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity 5x3 Holder, designed to perfectly accommodate your Wolfcraft circle cutter. Contains magnet holes and can be stacked.
Wydruk około 12,63 €–15,44 € nettoWstępna wycena jednego wariantu
EN: (česká verze níže) The feet is built upon two premises: The feet should not induce any bending / torque to the frame or the feet. Only compression forces to the plastic should be applied. The feet should be as low as possible, so the…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a tray to hold my Inkvent inks from Diamine, but I could not find one that was set up to work with the gridfinity system. So I did a little math, and used https://gridfinity.perplexinglabs.com/ to make a gridfinity bin that would…
Wydruk około 4,54 €–5,55 € nettoWstępna wycena jednego wariantu
Il me manquait cet élément pour terminer ma vedette de police. Impression en PETG avec filament clear. Hélas la couleur et la transparence ne sont pas là, mais la fonctionnalité est respectée J'ajoute le fichier fusion si vous avez…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Many thanks to @wuerfel for the original model!
Wydruk około 8,80 €–10,76 € nettoWstępna wycena jednego wariantu
The model features a tight fit for the AirTag to hold it securely in place. The outer circumference has a precise fit. I recommend wrapping it with 1 layer of tape to reduce slippage. The model has been tested and holds securely in place.
Wydruk około 2,46 €–3,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple storage rack to take up to 5 Axivity Sensors. The micro-usb port of each sensor is accessible through a hole. Can be printed without supports when the model is sliced with it's backside on the print sheet.
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
This model adds a NATO rail to a 2x3 Centruy Graphic, using only existing strap lugs and one Socket Head 1/4-20 UNC x 3/4 bolt in the tripod socket. The tabs at the ends engages the factory strap lugs and 1/4"-20 bolt pins the rail in…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A ADLX345 support Triangle Lab CHC-kit
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
(Ammo)box 100x50x30 mm with sliding lid, e.g. for Luger 9mm ammo
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
Enjoy!! As you like use it!!
Wydruk około 12,39 €–15,14 € nettoWstępna wycena jednego wariantu
Motivation For Christmas I got a special present from my son: A 45x32cm photo printed on metal sheet by displate.com For mounting this poster, a 80x80mm magnet needs to be glued to the wall. The magnet then can hold the metal sheet paster…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
3D MODEL DESCRIPTION Since the space of my desk getting lesser and lesser… so I have think of a effective way to re-organise all the tools and other stuffs… Pegboard is a fancy way to keep the things organised as we can mix’n’match the…
I designed v3 from scratch based on the v2 version. It now has more strength and more place for honeycomb / hex add-ons. I have added: Honeycomb / Hex Ledstrip holder Honeycomb / Hex Build plate holder Honeycomb / Hex Top glass holder I…
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
Small surface mount box, for hiding cables and wago connectors 2024.02.20 - I added a model with a slightly lower housing
English below 2 Möglichkeiten zur Überprüfung des Flows: Hinweis: Wenn Du größere oder kleinere Würfel bevorzugst, skaliere sie bitte mit deinem Slicer auf die von dir bevorzugte Größe. 1. Möglichkeit zur Berechnung des Flows: Wähle…
Very quick and easy bed leveling test. The squares are 20mm each placed on every corner and middle of the bed.
Collection of screws (ISO 4762 / DIN 912) including : M3x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
This is a recreation of https://www.prusaprinters.org/prints/36706-bed-level-test . I didn't like their instructions and the dimensions of the model, so I made my own. Print instructions Select the STL based on your desired layer height.
nut + 0,5 size % Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.
I needed af holder for my M18 batteries in my van, and I wanted it to be easy to print. There is no click lock on the model, the battery is supposed to be held in place by friction mine is printet in ASA but works well vith PLA,PETG,ABS…
Collection of screws (ISO 4017 / DIN 933) including : M3x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
Remix originally from Thingiverse: 1363148 (I think). Scaled up and bottom chopped off slightly for better printability. Has 2 holes for 8mm round magnets 3mm thick.
What's more fun then 4 keys? 9 keys! Designed to be compatible with Cherry MX style key switches. Just add 9 of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The only…
New cover for 12mm RGBW LEDs and space to mount an ESP32 to control with WLED
Hexified version of the Bambu Lab AMS Riser, with option to raise the glass as shelf to let heat out. I get a lot of requests and I don't mind following up on them as it makes these projects more interesting, although it takes a lot of…
Classic three-dimensional solid puzzle. Seven unique shapes combine into a simple cube. And there's more than one solution. Print and gift this fascinating puzzle game to your familly and frinds. Great for ages 8 and up. Print also…
this is a remix of the OneBlade travel case made by Andres. i just modified the magnet space to fit 4x3 or 4x4 magnets.
8x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version * I…
The 5.45x39mm cartridge is a rimless bottlenecked intermediate cartridge that was introduced into service in 1974 by the Soviet Union for use with the new AK-74 rifle. The 5.45x39mm supplemented and then largely replaced the 7.62x39mm…
In Line Wago 221 Junction Box, perfect for splitting 1 wire to 2 wires. Compact design
Simple Gridfinity bin. The name of the objects are the dimensions, for x and y and the height. The height is a multiple of 7mm: 2 = 14mm 3 = 21mm 4 = 28mm 6 = 42mm The x and y are multiples of 42mm: 1 = 42mm 2 = 84mm 3 = 126mm 4 = 168mm…
Just a very simple shelve with a size of 6x3 of the multiboard grid (15cm x 7,5cm). How to use: You will need at least one multiboard connector for each edge of the shelve, but may use as many as you like. Connect those to the multiboard,…
The 1.2L Replacement case for DeskMini x300. Basic “slots” styled core that's compatible with the whole DeskNano x300 system. This core fits most coolers, but doesn't fit Wraith Stealth. See if you can print this first, since the other…
All I did was add holes in the bottom of Robagon 's and liquidlogic 's pillars for 6x3 magnets to use them in Xevin 's MagHex Gloomhaven Tile System (links below) but other magnetic systems will work too. It was an easy and fast edit on…
Update: (8/21/2023) - Added new version for x-Max 3 - with spool holder mount at 90deg - note that this will position the desiccant well at the bottom ONLY if the holder is mounted on the right side of the printer. Also reduced the…
A calibration cube inspired by my logo with features such as overhangs, 45/90 corners, bridges, clearances, support material, text, etc. Several models available for the various clearances clearly marked with text at the top of the part.…
Cover for poco x3 for ideal for printing from flex material
Mushroom Shelf magnet with 6x3mm magnet holes
Hi! I have a Prusa 30x30 calibration cube for you. By printing this torture test, you can verify that your printer prints bridges, holes, and overhangs correctly and that it holds all dimensions correctly. In the photos you will find a…
![[OECC3] 50x30mm Cablechain System Print-in-Place with clips](https://media.printables.com/media/prints/1161422/images/8915989_80d5c68c-1f0c-4606-a001-5918bdafdacc_57d9913e-c7f8-42b0-8df2-1802d032fb1c/a5f11a44-660a-4451-b1fb-03ad527d0c35.png)
![[REMIX] Stone Pillars for Gloomhaven with 6x3 magnet Holes for Maghex](https://media.printables.com/media/prints/191252/images/1793058_b3977f03-5ded-4370-ab38-6b3fc28d5ee3/img_2250.jpg)
