3892 modeli
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this T switch Track stands on your own table in AR, at…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
The original size was a little small for hand holding, so the overall length was extended. Please be careful not to injury. -Update- I have made an update to add a small edge to the shape to allow for better finger hooking. There is no…
Wydruk około 4,89 €–5,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Table mount/extender/clamp Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋 Printing settings ⚙ Material: PETG / ABS / ASA Layer…
Wydruk około 6,61 €–8,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extension for the USB plug. Specifically designed to fit this 90° cable ( UP -USB 3.0 Male to Female variant, see the picture), but will probably work with other similar cables too ( like this one ). You don't need any additional…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
These are fast and easy to print. I have included a Mk3S gcode for a single and set of 6. The gcode is optimized to print fast... about 16 minutes. I recommend scaling Z to 80% for a more flexible ear saver. I have handed out about 300 of…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
The video on YouTube says it all: https://youtu.be/uFuYvUkHlpI About the Cap expander (short video): https://www.instagram.com/p/CD083fJD9TJ/ Easy printable even on hobby 3D printer, simple to mount, universal for almost every bike basket…
Wydruk około 2,62 €–3,21 € nettoWstępna wycena jednego wariantu
The Mask strap extender helps reduce the pain and pressure of wearing a mask for a long time. Fits every mask and head size. Challenge: Help others around you - print the mask strap extender (ear saver) for them. Especially doctors,…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Use the text tool in Prusaslicer to customize your signs :)
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have an Extendable, retractable, collapsing long sword for you. The individual parts fit together perfectly and it is very well thought out and so you can even play with…
Wydruk około 20,05 €–24,51 € nettoWstępna wycena jednego wariantu
Remix of smysnk 's toe kick clip, modified to fit the metal CAPITA legs. Following the advice of some YouTuber, I used the metal CAPITA legs instead of the standard plastic SEKTION legs. The metal legs are very sturdy and great, but the…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
4xM3 nuts and 4xM3x6mm bolts (best cap head socket screws) needed for assembly. After few test I found extenders wobbly, maybe trying print it with PLA will solve the problem. I'm still working on better version with supports to make it…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When securing cupboards to the wall, IKEA provide some adjustment but it can help to have more options when the wall line is not parallel. Fortunately I found a model already designed by @MotorboatMe_237913 so just needed to modify the…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
print 0.2 layer height of finer tightening the thread will hold the pencil in place assembly see image's, 2 or 3 parts depending on your preference. the end cap slides on the half length and chuck screws on to the threaded portion.
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
I couldn't find a crayon or pencil extender for my kids' crayon scraps. The commercial ones were either too expensive or too difficult for kids to handle. So I designed one myself. Advantages : Easy and fast crayon change. Optimized for…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
I recommend to use the *.3mf File to get a very lightweight knive (~10 g including blade). This is a quick and dirty remix done using the STLs and the cut tool of prusa slicer. Two of the pictures show the model with less exposed blade…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
This basic roman column container measures 34.8 mm x 40 mm and is 56 mm high. You can use it as a stand to add importance to any small object, as a container, or as the start for a miniature Vaporwave party. The lid and the bottom of the…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
This is a standard 12mm hex that is 2.2mm wider than a standard hex, with slightly more depth for the pin. I've printed this in both PLA and PETG. With PETG the fit can be tight due to the stringing, so a little bit of post processing…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
I found this filament model very interesting to experiment with so I made some of my own modifications that maximise its potential for a Prusa i3 and allow larger prints to be made on a single run. Main adjustments made to the OpenSCAD…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
🔫 Introducing the Bump Stock Extension for Micro Roni Gen4 by Veracon Engineering! Enhance the stability and control of your Micro Roni Gen4 with our custom-designed Bump Stock Extension. Engineered for precision and compatibility, this…
Wydruk około 3,26 €–3,99 € nettoWstępna wycena jednego wariantu
You need one extra M3 Screw + Nut (15-20mm long), one on each side, to complete it. It only works with liftet rear end.
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
The model was created for the Czech version of the game - “Cestou necestou rozšířené vydání” -box size 296 mm x 296 mm x 72 mm (outer size). Character boxes can accomodate both your character including the standee, platypus for the…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena jednego wariantu
The second iteration on an assembly made to be attached at the end of a long pole such that a can of fly or bug spray can be operated at range. *Tape pictured is no longer required in the V2 due to the new bolt clasp* Simply attach at the…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
German Die Citroën C4 Modelle ab 2020 enthalten eine Tablet-Halterung . Mit dieser Halterung können aber nur folgende Tablets genutzt werden: Amazon Fire 7"-Tablet, Vexia E1, Vexia E2 Plus, Danew 1013QC, Apple iPad 7th Mit dieser…
Wydruk około 1,70 €–2,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Combined Extended and 15deg PTFE connectors
Wydruk około 1,09 €–1,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed extended body mounts for a monster slash build and didnt want to buy them. Printed in PETG, we will see how well they hold up but its cheap to print spares uses m2.6 x 12mm wood screws to attach the posts
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It is the first functional version of the pen. Print it in PLA, that works best. Use a standard BIC-pen refill. Fusion360 and STEP files are included. It is print-in-place and easy to print. I tried out the fuzzy skin function in…
Wydruk około 1,98 €–2,41 € nettoWstępna wycena jednego wariantu
The Elgato Light Air comes with desk stands and a knob to attach to it. When using a desk adapter, the light hits on the support and does not allow to tilt enough for proper lighting. This model allows to extend and then tilt the light…
Wydruk około 1,97 €–2,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall mount for Ikea's Badring. This water sensor should actually lie on the floor, with the sensors in the floor to detect water. Now with this wall bracket you can connect other switches without having to do anything special to the unit…
Wydruk około 1,08 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These legs are to help ventilation compared to the shorter original legs. I have carpet and I put it on the flore and I need to put blocks under the legs so the fans will work but it's hard to move around, so I made these! You should use…
Wydruk około 11,43 €–13,97 € nettoWstępna wycena jednego wariantu
Extended version of a hot shoe grip for a6000 series cameras. This allows for some access to mode knob while not interfering with the standard Sony eye piece cover. Pictures show how the model fits on an a6600 and an a6300.
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to extend the “additional feet” and chimney for the printer-box spool tank to allow more room between the Spool Tank and MMU. The filament has a smooth run between the Tank and MMU. The original model can be found on the…
Wydruk około 16,78 €–20,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You need just one hook to hang a ceiling light and at least three of theese stand-off sets for leveling. I use a cable tie to hang a lamp in one point (between the lamp and one already installed ceiling hook), than I tie the cable tie. At…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
An extended spool holder for the Raise3d Pro3. Printed with PETG. Mounted with 3 DIN912 M4 x 30mm screws on the printer. The door still closes, it is only bent a little bit at my printer.
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A bit extender compatible with the iFixit Precision Bit Driver. The diameter of the extender shaft is smaller than the one on the driver, allowing for unscrewing of hard to reach screws. Shaft length is resizable in the Fusion source…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Simple longer outlet cover to support multi outlet add on. I found a basic outlet cover online somewhere (can't remember where) and just added some length. Note, this is a remix, but I can't find where I got the original model.
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
Tray extender for Dolce Gusto Piccolo XS, for a better fit of certain cup sizes. Print with with 3 vertical shells and no solid top or bottom layer. Adjust infill to own liking. Model snaps in place on top of existing tray.
Wydruk około 0,98 €–1,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Snap-on trigger and shoulder extensions for the Nintendo Switch Pro controller. This modification allows for easier use when the controller is being used on a tabletop . nondestructively attaches to the controller and can be easily…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
extended the length of the original design by ~35mm, and added some more rounding and smoothening
Wydruk około 3,48 €–4,25 € nettoWstępna wycena jednego wariantu
These are just hole insets of the “whack a mole CATtoy” for preventing the moles from being stuck when they are being pushed too far in. The extenders have cutouts for allowing the arms to go all the way up. For this reason I recommend…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Link to CAD: https://cad.onshape.com/documents/e6e09e9e0e007a10af293064/w/ebebf269118f97728c774686/e/3e5ef0c7e7cf5655f47403fc?renderMode=0&uiState=63e95f946c42ea2abe0b7efe
Wydruk około 3,80 €–4,64 € nettoWstępna wycena jednego wariantu
An extended cover for Klaus 80x80 flush mount distribution boxes (UP-Verteilerkasten) for when you can't fit all the wiring back inside after making some changes.
Wydruk około 3,52 €–4,31 € nettoWstępna wycena jednego wariantu
We wanted to increase the height of a shoe rack so that our robot could crawl under to clean. So I designed some leg extension. In this design, there is a hole that I manually threaded to fit the original screw of the leg that was in…
Wydruk około 7,06 €–8,63 € nettoWstępna wycena jednego wariantu
IKEA CITRONHAJ Spices Stairs These stairs are specifically made for the 20cm wide METOD Kitchen Cupboard with pull-out drawer Put these in the top shelf with 4 Citronhaj or print more of them :) Extendable Low Tolerance (0.2mm gap on…
Wydruk około 4,60 €–5,62 € nettoWstępna wycena jednego wariantu
Clip on footplate guard for Tilite manual wheelchair. Also extends footplate a few cm out. Sizing may vary for clearance of the front castors, these are just the dimensions that fit my custom chair. Printed .2mm layer height on .4mm…
Wydruk około 4,42 €–5,41 € nettoWstępna wycena jednego wariantu
I created this shaft that replaces the original, it can hold 2 regular size spools on each side. I made mine using ABS for rigidity.
Wydruk około 3,28 €–4,00 € nettoWstępna wycena jednego wariantu
a simple screw-like extending pillar, with a rotation locking slider for locking the height.
Wydruk około 3,32 €–4,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple hook and latch drawer lock to prevent prying toddler hands from opening drawers and accessing their contents. Few other drawer locks work for my drawers, which are mounted into a face frame and have drawer fronts with narrow…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Adils extender 80mm A leg extender created because I couldn't find a 80mm one that would print fast and as simple as possible. In the first photo is the orientation it has to be printed (it has an internal chamfer). I advise using PETG or…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I assembled the RP2040 ( SKU 1030018) with the additional header pins - this remix is to allow fitment of the board with extended headers. My application is more likely to get wet, so I opted to close off the light pipes. Recommended…
Wydruk około 1,63 €–2,00 € nettoWstępna wycena jednego wariantu
Clothes hook has been lengthened, as this saves more space when the jacket shoulders are lower underneath each other. This suits my needs better. I hope others will too. Kleiderhaken wurde verlängert, da dadurch mehr Platz eingespart…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Mounting hardware for range extender of DualShock 4 controller with universal DS4 zip-tie attachment. The long range capability can be done adding RC joystick module from https://github.com/ctu-vras/rcjoy . System is fully see-through and…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Maximize your Detolf display case with this shelf extender! Designed to increase the height of your glass shelves by 60 mm, it allows for better organization and more room to showcase your collectibles. Easy to install and 3D printed for…
Wydruk około 3,19 €–3,90 € nettoWstępna wycena jednego wariantu
CAD Model https://cad.onshape.com/documents/d4ef7db3f484d8413f91ce4c/w/2ea0bc79654665c9d7ea9868/e/6b2ece1247dc4d86916e4446?renderMode=0&uiState=6597c3894a353e4557254a0a
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
Extend ceiling lights to improve looks and resolve hole imperfections. Designed for 4" lights but can be adapted to fit any size with ease. FreeCAD model attached.
Wydruk około 1,96 €–2,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model was made as an extension to the iBlinds solar cell hanger. When the window frame is large, the solar cell will be blocked from the sun. This extension will keep the solar cell from being shadowed. The extension is short enough…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by this version for the round baby mobile arm, I decided to make one that fit our square version. Designed in Onshape , feel free to remix. Printed in PLA with supports and low infill which works just fine!
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
I made the extender by sinking the original in to the build plate and then increasing it's size. Next, I took the original and used it as a negative volume to empty out the inside so it can just friction fit on top. I did find that it was…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A coworker's wife wanted to have a wash-basin in her new bathroom just a slightly higher…. The simplest solution turned out to lift the entire cabinet, by extending its legs. And since I've seen this exact type of furniture legs also used…
Wydruk około 12,30 €–15,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement for the Tzumi ionvac 3-in-1 design vacuum extender handle connector clip. When the clip is broken, the connection with extender handle could become loose. Print 0.4mm nozzle, 0.2mm layer height, 3 perimeters, 100%…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a TV mount for the OREI 4K HDMI over ethernet extender (model UHD-EXB400R-K). Print the model and use double sided tape to attach to your TV. Printed on a PRUSA Mk4S w/ MMU3 in Original Enclosure with Overture PLA. PLA, 0.35mm…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
I made this SpiceShelf Extender to get a bit more room in my spice rack. It holds two small cylindrical jars and fits neatly into my store-bought spice shelf. Dimension of a jar: round about 41mm diameter, 77mm height Motivation: Our…
Wydruk około 2,54 €–3,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Scame box 4003376 Extend
Wydruk około 11,87 €–14,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An extended version of the original tool holder from bortech88.
Wydruk około 7,07 €–8,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a gridfinity bin for shallow drawer of 50mm height that fits the Hongdui HD29 sharpening system + extended vice grips. I have designed and added STEP files for all the Hongdui parts with built in tolerances, so you can just…
Wydruk około 10,98 €–13,42 € nettoWstępna wycena jednego wariantu
Building a large minifig wall meant that printing AJ Raceway's awesome hexagons individually was taking a little time. So I whipped up some larger options depending on the size of your print bed. You can now print a set of 3 or a set of…
This is an extended version of Tonyk's excellent Pokeball card box, for those with more cards (also fits sleeved cards). This version's roughly 3 times longer than the original, measuring ~178mm long. You need to print 2 copies of the…
If you like my work, don't hesitate to support me by paying me a ☕. Thank you 🙂 https://ko-fi.com/vinis
Gridfinity Extended OpenSCAD Model This is a recreation of Zack Freedman's gridfinity system in OpenSCAD. The Model attempts to accurately re-produce in OpenSCAD the Gridfinity bins as designed by Zack Freedman. It also adds extra…
Extender v8.0 for GameSir G8+ optimized for versatility and ease-of-use. Version 8.0 has been streamlined to just two components , ensuring a faster print and easier setup. It’s engineered to fit tablets up to 11″ , including popular…
I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…
Since the Jonsbo N2 originally only comes with a quite loud “slim” (15mm deep) 120mm fan in the back I wanted to swap it out for a quiet fullsize (25mm deep) fan. Unfortunately due to the very limited space in the back of the case this…
There are so many of these out there. The AAA batteries in others could get clogged. This should be fixed here. I modified this so that you could attach them side my side to form a block and allow for more storage. Mix and match as many…
Added a raised flat handle to make turning easier. July 2024 :- Updated handle files to match the different base sizes from codysechelski project
I designed this to fit onto the door of my wifes Cricut maker so the mat doesnt flex when moving in and out. This is designed for the 12x12" mat, but i also have a design for the 12x24" mat also. i printed mine with split colours so its…
Redesigned the slot little bigger to fit more screw types. Prints flat & side perfectly if printer is fine tuned. Otherwise side printing would work. Offset pin/hole: 0.3mm circular Minimum Settings Recommended: 5 Walls, 5 Top Layers, 5…
I modified the Milwaukee M12 Battery Holder to fit the M12 extended batteries
all stock hardware. I used pps-cf filament but anything should work
This is a remix of “Laptop Stand” by finke. I really liked the original model, but added 15" computer support and some nice to haves like a stand version with no lip so you can close the computer and an optional connector for…
Here's the V7 of my wearable set of claws, that extend/retract with your fingers movement. The ZIP file contains a wide range of sizes and a few variants, allowing for a good fit (hopefully) for most users.
Can grab from about 20mm to 37mm diameter, 10mm more range than the original model. Uses the same stock gear. The gear gets clipped in place before the Broom Holder is mounted on a wall. Once mounted the gear is completely captive. No…
Extendable and modular stackable drink dispenser, multiple combinations and configurations in heights, levels, rotations, etc. Model measures The model is designed for the 66 mm diameter x 115 mm long can. You can make other dimensions of…
This coffe bean reservoir extender allows you to tiple the amount of coffe beans stored direct in your machine to not run out of coffee beans so fast. It ist designes to fit the original lid and use the grinded openig as well. This…
It's an extender for coat hangers, to hang a coat hanger on a coat hanger to have a coat hanger chain gang of coat hangers. Print instructions Category: Household Supplies Summary It's an extender for coat hangers, to hang a coat hanger…
An extension arm to get a longer reach for the SG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the MG90 servo's
Extended/custom shaped barrel. No supports should be needed. Hope you enjoy. Included is the barrel latch, there was alot of play and lack of spring. Made latch catch a little thicker. I’ve uploaded my own version/custom form fit grip. It…
I needed the height of a piece of furniture to be raised so that the power point behind it was still accessible. I printed 4 of these and used them to gain lift of about 36mm. The dimensions of the print are 40mm x 40mm with a 4mm deep…
✏ Back to School with a smart and useful idea! How many times does a pencil become too short to hold comfortably, even though it still has plenty of lead left? With the Pencil Saver , a simple 3D print, you can give your short pencils a…
This print could be very useful for people with disabilities and could give normal people more accuracy on certain games and joysticks, this print could possibly be put on PlayStation, Xbox, Steelseries branded controllers as well as the…
A NERF silencer modeled for my son's Elite 2.0. It can probably fit other models. It should be printed as it comes without support.
Yet more DJI Mini/Mini 2 Landing Gear Extensions. These are light, about 5.5 g for all four. They add about an inch (25mm) to the height. I used PETg, but they should be fine with other materials. I used .20mm layers. Could have used .15,…
Handle length is 200mm and you can extend it up to 340mm. I printed flap with TPU filament and other parts with PLA. I printed rod and locking nut 0.16mm layer height and other parts with 0.2mm. I made threads 10mm long for more strength.…
Thank you Paul for the design!
Small 250g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 250g spools have a diameter that is too small and the rollers won't touch the rim.…
Note: This project is not being updated at the moment, I'm working on a different printer based on this but I can't promise any dates for release and it changes a lot of stuff so it's almost a new printer. Still, feel free to download the…
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
