Yoghurt Lid / Joghurt Deckel
Für Joghurtbecher die man nicht wieder verschließen kann. For yogurt cups that you can not reseal. Printed with TPU/Flex with 100% infill
- Pobrania
- 463
- Polubienia
- 38
- Ocena
- 5
36 modeli
Für Joghurtbecher die man nicht wieder verschließen kann. For yogurt cups that you can not reseal. Printed with TPU/Flex with 100% infill
This lids for various round plastic cups (yogurt, skyr, creme fraiche etc.) include cup sizes 75mm (200g), 94.5mm (500g) and 95.2mm (300g Aldi Körniger Frischkäse) and are designed for printing with TPU. The dimensions are defined so that…
Ich habe das ursprünglich auf Thingiverse von ChrisPHL veröffentlichte Modell etwas verändert: Die Orientierung wurde geändert und der Deckel wurde 1mm dünner gemacht, damit er flexibler ist. Ich habe den Deckel aus PP (Polypropylen)…
Lid printed in TPU for 95mm Yoghurt. May also work if printed in PLA. If you need another diameter you may adapt the OpenSCAD file Category: Kitchen & Dining
Optimize your infant food storage with our 3D model. Designed by Khalm Down Hobbies, this Baby Food/Squeezy Pouch/Yoghurt Storage Rail is a breakthrough solution to organize your children’s squeeze pouches, commonly found at retail stores…
500g Joghurt werden selten auf einmal gegessen, daher dieser Deckel um den offenen Joghurt wieder sauber abdecken zu können. Ich habe versucht möglichst materialsparend zu gestalten und mit einer 0,4mm Düse optimiert auf 2 Wände. Da beim…
Designed to be printed in hard plastic such as PLA or PETG 0.4 Nozzle Layer Height: 0,2 0,24 or 0,28
Simple yoghurt pot lid which fits the 450g Skyr pots you can get in the UK. Not much else to say. Uses about 21g of filament.
Lid for 95mm yoghurt pot.
This holder makes it easier to have e.g. the yoghurt package standing upside down in the refrigerator to have the remains pouring down to the opening. This holder fits packages where the cap is on the side, e.g. Tetra Pak Rex, Elopak Pure…
Lid for opened cream, sour cream or yoghurt pots, completely reworked. Clips tightly, printed with flexible filament (TPU). 2024-12 I have added a lid for the large cups (500ml). [de] Deckel für angebrochene Sahne, Saure Sahne od.…
This holder makes it easier to have e.g. the yoghurt (or e.g. sour milk) package standing upside down in the refrigerator to have the remains pouring down to the opening. This holder fits packages where the cap is on the top, e.g. Tetra…
We go through a lot of yoghurt pots, so this seemed like an excellent approach to efficient recycling. It fits in a regular round plastic 450g yoghurt pot container (from UK supermarkets) but you can tweak the size as needed. Any…
About Just a simple lid for those large yoghurt cups one can never eat in one go :-) Printing Prototype printed in PLA with 0.2 mm layer height, 2 perimeters, 1 mm minimum shell thickness. Copying Model CC-BY [email protected]. Using…
A remix of the Yoghurt stand by LiquidMonkey on thingiverse. Just added some rounding and cut out some parts on the sides. Works like a charm!
his holder makes it easier to have e.g. the yoghurt (or e.g. sour milk) package standing upside down in the refrigerator to have the remains pouring down to the opening. This holder fits packages where the cap is on the top, e.g. Tetra…
Replacement for the original part, that was standar a few years ago, but almost completely disappeared nowadays.
A simple clip-on and reusable storage top for large yoghurt pots and similar. Large pots of yoghurt / cream etc used to come with a clip on cover to stop contamination in the fridge. Suppliers have stopped this to reduce packaging and…
I designed and built this spoon holder for my children's yoghurt/muesli cups. In my case, I used 300ml Mepal cups. Affiliate link: Mepal 300 ml + 120 ml - Nordic Black The holder is sturdy and can be removed from the cup. Both the spoon…
Yoghurt or Cream Pot Lids designed for printing in flex material. The 95mm and 75mm diameters refer to the outer diameter of the pot lip. The lids are designed to be a snug "airtight" fit on the pot. Because of the thin sections, they…
A wall mount for Yoghurt pots to hold pencils.
I have kept lots of these Muller Light / Muller Rice yoghurt pots over time and never found a good use. I designed this holder/mount for the Skadis board so I can use some of them for storage. It is designed to be strong, stable but easy…
Do you have a jumble of chobani containers in your fridge? Do you have a psychological need to enforce "first in first out" to avoid yoghurt going bad? Then the chobanner is for you! The base chobanner holds two chobani containers, and…
Ben jij het ook zo zat dat je kwark alleen zo'n irritant velletje heeft in plaats van een normale deksel? Nooit meer ben je verplicht om je kwark in 1x op te consumeren. Nimmer meer het zoeken naar een stukje plastic folie. Geen vies…
A simple slide in place lid for aero yoghurt platic cups, great for small DND prints or other small parts.
I wanted to make yoghurt in old 1L yoghurt containers instead of the small glass jars provided with the yoghurt maker. I modelled this simple lid extender so that I could fit larger containers and still close the lid to keep the heat in.…
Stand to store standard 70x70 yoghurt package with screwcap on, up and down to get all the content out. Use anything as filament, PETG is allright and food safe. No need for supports.
My EasiYo yoghurt maker lid fractured due to heat and UV damage, so instead of going to a shop to buy a replacement (now in multiple colours!), "I make a new one". This is a simple OpenSCAD hull() design which fits nicely on the original…
I created this model to be able to stack/organize my yoghurts in the fridge. Using this simple “lid” they fill not fall or wandering around on the shelves. You can do 3+ layers if you have enough shelf height. :-) The model files are…
This is a mould which is used to cast a silicone mould for making yoghurt drops - in this case, for my daughter's rats. Print the mould (no supports required in the supplied orientation), then fill it to the brim with food-grade casting…
I bought an electric progurt yoghurt fermenter, and have been using a smart plug to make it set and forget. However, it didn't come with a lid, and seemed to be fermenting unevenly. So, I used a photogrammetry app to scan the top of the…
I created this model to be able to stack/organize my yoghurts in the fridge. Using this flower style “lid” they fill not fall or wandering around on the shelves. You can do 3+ layers if you have enough shelf height. :-) The model files…
A perfect fit cap for a 450g onken yoghurt tub. Or any other tub that is flexible with a 94mm top overhang.
It's now working - print the bottom screw and the lid to protect your yoghurt on your travels. Mostly the yoghurt cups have only a thin aluminium foil and with Murphys law there's always a pen or another sharp thing in your backpack to…
Ben jij het ook zo zat dat je kwark alleen zo'n irritant velletje heeft in plaats van een normale deksel? Nooit meer ben je verplicht om je kwark in 1x op te consumeren. Nimmer meer het zoeken naar een stukje plastic folie. Geen vies…