51 modeli
For some time I wanted to remove the docking arm of my Bowers and Wilkens Zeppelin Air, because I am not using the old 30pin connector for Ipods. Instead of that I am using Apple Airplay or the AUX connector. If you remove the arm, you…
A Hueforge manga panel of Gyro Zeppeli from JJBA: Steel Ball Run. If you try to print this, I would like to know how it looks like with darker blue (originally used as shading, but I don't have a blue filament that dark). I'd be glad to…
This model is of the steel ball weapon from the anime Jojo's Bizarre Adventure. A step version is included to facilitate modification. I had luck printing the halved version (print two copies as the halves are identical) at 0.1 mm layer…
Statuette for fans of the band Led Zeppelin
Scale 1:1000 zeppelin, modeled in Fusion 360. There's not a lot of detail but it still looks good. Now I designed thinner struts, 1 mm thick. I wanted to make it 1.5 but many of the details wouldn't work or they would look bad. The…
Scale 1:1000 zeppelin, modeled in Fusion 360. There's not a lot of detail but it still looks good. Print the propeller 4 times and glue them on. 1 goes on the rear of each cabin, and the other 2 go on the struts hanging off the center…
Steel Ball 1:1, J.Lo Zeppeli stand (JoJo Part 7 Steel Ball Run) Dimensions (mm) : 80 x 80 x 81 I used around 74 grams of filament Must use supports
led zeppeling logos Print instructions Category: 2D Art Summary led zeppeling logos
The LZ 127 Graf Zeppelin was a marvel of engineering and a symbol of the golden age of airships. Built in Germany in the 1920s, it was one of the largest airships ever constructed, measuring over 236 meters in length. Named after Count…
Led Zeppelin Keychain NO MMU
Led Zeppelin 80's Band Sign It's been a few but it think I just cut this one down removing the emojis and resized. As with most just resize to what you want and color if you have a color printer. I tried to keep the logo’s as original…
This is a model of what the Graf Zeppelin (Germany's attempt at a carrier) may have looked like, had Germany actually finished it. the ship was only ~80% completed by the time WWII ended. I haven't painted the ship yet, (been busy with…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Just another nice toy zeppelin. Easy to print in two parts to be glued together. Looks awesome when printed in multicolor. Do not forget to download the STAND , too :-) Material: PLA Layerheight: 0.2mm Infill: 15%
the tight pass between the top and the bottom should provide a fine grind.
I love rock music from the 70s and 80s so I wanted to support my posters a little with some Hueforge power. So I thought I'd start with one of the best bands of all time, Led Zeppelin. Other ones will come soon. I also build a frame for…
Inspired by WoW's horde faction zeppelins. The solid version is one piece, the constructed requires using glue on chain end, as well as chimney to connect the bridge between two blimps.
Easy to print STAND for the Makerteam zeppelin (and others of course). You can scale it up and down as you like to meet other models size. Material: PLA Layerheight: 0.2mm Infill: 15%
model you see here printed on 50% scale check my profile for more REDCON designs
Zeppelin LZ-129 Hindenburg for multi-colour 3D printers, featuring the original ‘Hindenburg’ lettering.
I thought the R-Class was a big model, but I decided to go even bigger. The Graf Zeppelin is very unique airship, and in my opinion the best-looking one every built. I could have scaled it down, but I wanted it to be at the same scale as…
Have fun with this one, Led Zeppelin Coin. Let's see what kind of mixes you guys can come up with.
Sice of an Elegoo mars 3 Category: 3D Printing
Show your love for one of the greatest bands ever with this Led-Zeppelin tow hitch cover.
The R-Class is my favorite zeppelin design, and since I've been playing some Battlefield 1 lately, I felt that it was worth more attention. I designed this at the same scale as the P and Q zeppelins, which is roughly 1:595 scale. I didn't…
Aviation Tyles with aircrafts, planes, zeppelin with the size of "Qwirkle Travel Edition". Set of 6 different aviation theme icons. When coloured in slicer, doublicate them twice to get 3 identical sets for each colour.
This .3MF file is completely free to download, print, and use however you see fit. There is no paywall, membership, or hidden charge. Once you download the file, it is yours to enjoy. Print it for yourself, give it as a gift, customize…
The old door handles was broken, when I moved into an apartment, and I found this model. Added the other type of collar I have.
This time I made Led Zeppelin keychain. Right now that might be my favourite band! Just so good songs! Anyway, I hope you like it and please add a make if you printed it! Also you can comment bands whose keychain you want me to make.
It's been a while since I tackled a zeppelin model, but this one is definitely my favorite so far. I got the shaping to be a lot more accurate, and some of the details are finer. Of course, it's hard to add much detail to what is…
Project: jimmypage2.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 146.24x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
This phone stand consisting of 3 pieces. The base with body to be screwed together. The "Gibson" label to be glued. Use standard PLA, 0,2 mm layer, 15% infill. The colors you can choose as per your wish.
⚡ SipStamp – Led Zeppelin Coffee Stencil (Zoso Edition) Stairway to caffeine, anyone? Rock your morning ritual with this Led Zeppelin–inspired SipStamp , featuring the iconic Zoso symbol and mystical band runes. Whether you’re a diehard…
Es un dirigible, cuatrimotor, inspirado en la clase "Zeppelin" pero de diseño propio. Se presenta en una peana para su mejor exhibición. El archivo ZIP contiene dos archivos STL, uno correspondiente al aparato y otro a la peana. Tamaño:…
Whole Lotta Love for your wall! This 3D display plaque captures the timeless, art-deco inspired lettering of rock legends Led Zeppelin , paired with options for the iconic Swan Song Icarus (Apollo) winged figure. This model is part of my…
I designed a Zeppelin shaped holder for my Diplomat Aero. The print needs support. I printed the top part standing on the two sides and the bottom part standing on the feet (how it does stand on the picture). The two parts are connected…
This is a 2d panel of Gyro Zeppeli from JoJo's Bizarre Adventure from part 7, it is made to be printed in a 0,08 layer line, but you can also try to make it with a 0.16 layer line if you want, the result is really good as long as you have…
Es un dirigible, cuatrimotor, inspirado en la clase "Zeppelin" pero de diseño propio. Se presenta en una peana para su mejor exhibición. El archivo ZIP contiene dos archivos STL, uno correspondiente al aparato y otro a la peana. Tamaño:…
simple yet useful storage for your groom-X Zeppelin nozzles, it fits snug around the stand bar with hole for tighten screw. Rounded corners, place for 3 nozzles, compact, easy print. enjoy
A highly detailed 3D printed collectible bust of Caesar Anthonio Zeppeli, the proud and skilled Hamon user from the legendary anime and manga series JoJo's Bizarre Adventure: Battle Tendency. This stunning miniature model beautifully…
Kashmir vibes for your studio wall! This 3D wall display plaque captures a custom, angular stacked geometric rendition of the Led Zeppelin name—incorporating a dynamic connection between the upper "LED" block and the lower "ZEPPELIN" bar.…
This by far is my worst design.. it wasn't what I was going for and over all it is just sloppy. I hope that you like it.
Steel Ball 1:1, J.Lo Zeppeli stand (JoJo Part 7 Steel Ball Run) Dimensions (mm) : 80 x 80 x 81 I used around 74 grams of filament Must use supports
For some time I wanted to remove the docking arm of my Bowers and Wilkens Zeppelin Air, because I am not using the old 30pin connector for Ipods. Instead of that I am using Apple Airplay or the AUX connector. If you remove the arm, you…
