Liczymy pasujące modele…
Ultralight glider by robotfriend scaled down to print on the mini+ or smaller printers. UPDATED TO V3 No modifications have been made aside from the scale down but it still flies well.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
mini glider v1.1 by Alex scaled down to 170mm wingspan to fit on the Prusa Mini+ or printers with smaller beds.
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Shark glider by Arky scaled down to fit on a mini+ or a smaller printer.
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
used 10% cubic infill, bit of supports around the fillet on the heatbed, PETG
Wydruk około 4,31 €–5,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a big number for our house, so I decided to make a whole collection of numbers, so everyone can use them. I wanted numbers with serifs, it is based on the beautiful Noto serif font. Numbers are 170mm high, and 10mm deep. If you…
A quick alteration of my popular cable tie remix model to feature solid sides, making it perfect to write on with a Sharpie or other permanent marker for organising cables and alike. It features 10mm x 20mm-170mm writing space. PETG is…
Ein Organizer um Gravitrax und kompatibele Tiles zu Stapeln. Mit 170mm passt es in XXL Starterset Kartons.
A round sieve with 170mm. diameter and 4mm. holes.
kiteboard handle 2 versions holes 205mm and 170 mm (depending of the brand you got) recommend atleast 1mm thick walls and infill atleast 40% 0.2 layer 0.4 nozzle Print on it its side for the best strength
Used a remixed insert tab by K2_kevin - https://www.printables.com/model/162845-insert-empty-remix-without-the-tabs/files Easy to move around yet fits snug.
A 170mm ruler , designed as it was the one thing I dont have in the house and I needed one. There is a series of holes in 10mm increments, can be used as a crude compass with the aid of a drawing pin. Measurement is fairly accurate , all…
170mm x 75mm tray with front lip for the honeycomb storage wall.
A coluna de som do meu carro avariou tive de fazer um adaptador Espero que gostem Se imprimir este objeto, por favor partilhe a sua impressão 3D ----- English version ( translate google )--- The speaker of my car broke down I had to make…
Small bin best printed with "fuzzy Skin" in prusa slicer
Voici ma révision de la polisseuse reittec, basée à partir des modèles suivant: Le modèle originale de reitter m: https://www.thingiverse.com/thing:3666116/ La révision en 170mm: https://www.thingiverse.com/thing:4076827 les roulements de…
I suggest: no supports 0.75% infill lots of perimeters. enjoy!
Originally designed to fit around 15 meters of UTP cable. Used to carry UTP in my backpack. Print in PETG for better durability if your printer is capable/tuned enough. PLA is also fine.
Settings: Filament: PLA, PETG Layer height: 0.2mm or less Wall loops: 2 Top shell layers: 0 Bottom shell layers: optional Infill: No Support: No I printed with bottom shell layers 2 and then made a hole for garland. You can print it in…
Pretty simple design. I might remix later with holes in the bars to help save material. The gap measurement is the distance between the prongs. If you add 32mm to that number you get the actual length end to end. Example the 15mm gap…
This ist my first try tro design a self watering pot for bonsai. I have tried to develop a bonsai pot that is as flat as possible despite the water reservoir. The water level indicator was also kept very minimalist to set the focus at the…
Pretty simple design. The gap measurement is the distance between the prongs. If you add 32mm to that number you get the actual length end to end. Example the 15mm gap model is actually 47mm long. I widened the models that are 45mm and up…
Big upholstery nozzle with 170mm wide opening. Files for two systems available: -35mm inner diameter for Mirka rubber connection -Bosch Professional Click and Clean adapter 35mm version requieres no support Bosch version requieres support…
A custom-designed, narrow suction nozzle attachment for the Kärcher WD3 vacuum cleaner (and other models sharing the same hose diameter). With a width of 170mm, it bridges the gap between the standard wide floor nozzle and the…
Longer version of spool holder that comes with mini.
Needed a stake without the eye holes. Simple splice/paste and simple remix. This has been sized to 170mm i length as that is what I needed Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 200…
Storage box 170mm x 130mm x 91mm Storage box for bathroom drawer.
Pretty simple design. I might remix later with holes in the bars to help save material. The gap measurement is the distance between the prongs. If you add 32mm to that number you get the actual length end to end. Example the 15mm gap…
Corner profile 45dgr for 2020profile, 170mm long
Designed to have an INNER diameter of 170mm to fit Stabilo Pens (and maybe many more).
This is a remix of the Screw Docks originally made by KEKO to work with the StealthChanger System. I already had the printed Door Buffer from DraftShift and wanted to fit these in to the original space, so I modified the dock slightly to…
TIP: Don't print this it only works on full round object. and than you just can divide by 2 to get the Radius from the Diameter. This is a remix for the 170x200mm bed. It works for my dual-extruder setup from my Ultimaker original. only…
This minimalist decorative vase features a clean, simple design, perfect for modern or contemporary interiors. Standing 170 mm tall and 91 mm wide, it is ideal for decorating shelves, tables, or desks. No supports required , making it…
Most bed leveling prints consist of individual rectangles spread across the print bed, which must be removed individually afterwards... WHY? A narrow 1.35 mm strip consisting of three 0.45 mm perimeters with a 0.4 mm nozzle should be…
I modified this projet because I haven't found this IKEA vase. There are two files to be printed, the jar (redesigned with its ribs) and its cap. I hope to be helpful! Good job! P.S. Not finding the PGM 37DC12 / 77 engine I decided to use…
A 170mm x 110mm base was added to the original handle to accommodate a large rubber stamp being applied to it. Printed in PLA with 0.20 layers at 15% infill.
Found the original was too small for my LED ring and the spacing of the segments was off. Used OpenSCAD to create a new ring suited to the dimensions of mine, removed the segments and then added back to the base. As my ring is solid I…
This is a solid oval base 170mm x 105mm and 4mm thick. It has an integrated wound counter which takes 12mm dice. It's a really simple mash up between two models. I'm really sorry but I can't find the original base model like so if anyone…
This is the 170mm diameter version from my bigger filter: https://www.printables.com/model/1030245-hamburger-mattenfilter-frame-200mm-diameter The needed mat size is 50x50cm.
This is an adapter to install aftermarket 6.5" speakers into the following Volvo models: 2019-2024 S60 2017-2024 S90 2017-2024 V60 2017-2024 V90 2016-2024 XC90 You can install 1/4" foam tape on the backside to seal against the inner door.…
This is a rather large keychain scraper but can be resized. I printed it in PETG and it's worked pretty well so i keep my fingers off the print surface.
This custom-designed 170mm round mini base is perfect for Warhammer and other tabletop miniatures. Ideal for larger models or scenic diorama displays, it features a smooth, flat surface for easy customization with terrain, textures, or…
Medium spool for filament, does not require supports, consists of only two elements
RingLight with diameter of 170mm for a 12mm wide WS2812B LED-strip (144LED/m, in this configuration 50cm/72LED) controlled by a Arduino Nano. Be aware that different manufacturers of LED-strips use different sizes of LEDs and width of…
Many Ender 3 heatbeds were specified with 170x170mm hole spacing. These bearing retainers have been redesigned to fit those heatbeds. Since most folks will be tearing down their older i3/bed slingers to have fun and build the legacy,…
Pokud někdo vlastníte malý radiační štít typu 140x170mm ( Kryt pro čidla meteostanice, 140x170mm, plast | LaskaKit ), lze použít tuto vnitřní část pro jednoduché uchycení například SHT3x čidla do prostřední části tohoto radiačního štítu.
while slicing, printing and assamling some problems occurs, so i made some changes ... created some better flex foots .. Polisher-2.v3-foot_Flex_x4.stl closing holes in the model .. Polisher-4.v3-casing_b.stl gear is wobbeling, so i made…
This is a tool for building the Folger Tech FT-5. It calls out to space the two upper levels 170mm apart. Had no way of doing it. My dial calipers only went to 6" or a little over 152 mm so I just made my own tool to do the job. Nice to…
Insert for the tin I received when I ordered replacement nozzles to better hold and organize the replacement nozzles.
needed a way to stop the drum bouncing off, designed for a paint can. 1x skateboard bearing ... 8mm inside diameter 1x 1 1/2 inch spring and some 3mm and 8mm bolts also i added spacers glued into the support wheel holes so i could use…
Front panel for 120mm cooler. Designed for a PC chassis 170mm wide x 410mm high. 3 units can be installed if the chassis meets the total size described. Recommended for older chassis models. PETG is recommended at 100 bed and 240…
Its a funnel. it's big. it's very sturdy.
quick desing nad print to instal led panel on the wall or ceiling.
This is a ventilation cover I have made for my bathroom system where ventilation is in the pipe and I have a very specific space on the left inside of the tiles but this can be used in general if someone prefers it. You might want to make…
Recomended 55% - 100% Infill For Best result !!! JMS3D Shop Phone Stand – Improved Version (170 mm) The redesigned 170 mm JMS3D Phone Stand delivers extra stability, better grip, and a sleek, modern look. Its upgraded dual‑channel base…
I had bought a used pump which lacked the gasket, so I tried printing an O-Ring with TPU95 and it worked perfectly. The ring has a diameter of 170mm and a strength of 5.5mm and it fits the vessel. Works without leaks for two weeks now.…
You probably shouldn't make this yo-yo. Remember that I told you that. I am also not liable for any injuries caused while throwing this monstrosity. If you do decide against your better judgement to make this unholy abomination you are…
A tray i made for my small plantpots. Its dimensions are 340mm x 170mm x 15mm.
Remixed for the scoop I own.
170MMX170MM BROTHERHOOD WE TRUST TRAY
This is a remix of the excellent Dropper Seatpost Protector by tankist73. The original design uses an integrated TPU mounting arm. While functional, the model was too large to fit on my printer bed (Anycubic Mega S). To solve this, I…
This is the 170mm diameter version from my bigger filter: https://www.printables.com/model/1030245-hamburger-mattenfilter-frame-200mm-diameter The needed mat size is 50x50cm.
One Version for my OBR and one wihtout the skull. I printed it with PETG 100%. I wanted it a littele bit heavy.
