38 modeli
Wall mount bracket for the Bosch 18V charger model AL1830CV. Print it on its side to ensure it is more flexible and durable. PETG is better for this use case, but PLA should be good enough.
Inspiriert von der Wandhalter Wallmount / Wandhalterung Bosch AL 1830 CV Charger" by vinyli habe ich zuerst den Halter umgezeichnet, da ich Fusion treu bleiben wollte. Hiernach habe ich die Löcher um wenige Millimeter weiter nach außen…
This is a remix (draft) of the "Makita Mega Battery for 18650 10x extended 15x 20x replica" ( https://www.thingiverse.com/thing:5026796 ) with the following changes: modified version of 1.stl + 2.stl to fit a BMS (BL1830) like…
Remove the screws on the bottom of your Bosch 18V battery charger AL 1830 CV, attach the wall mount and secure it with the same screws. The model was created with FreeCAD 0.21.1.
This allows you to mount a Bosch AL1830 charger (and possibly other AL series ones such as the AL1815 or the AL1880) to a wall with the ability to quickly remove it when needed elsewhere. It makes use of a simple dove tail sliding…
See Post-Printing section for installation tips This is the plastic end piece for the rip fence that came with a Craftsman 10" Table Saw Model Number 137.218300. This is quite an old tool, and I doubt anyone will ever find this useful but…
Easy and quick to print. These two parts allow the battery charger to be fixed vertically. It is best to print with supports. It is necessary to put slightly longer screws (3x25). I printed it with PLA.
Remove the screws on the bottom of your Bosch 18V battery charger AL 1830 CV, attach the wall hanger and secure it with the same screws. The model was created with FreeCAD 0.21.1.
I adapted the orginal design from SKREY so I quickly can detach the wallmount from the wall and take the charger with me. Thanks for the orignal design. Category: Tools
I ended up acquiring a copy of the new version of 1830 , released in 2018 by Lookout. While this is basically the same game as the Avalon Hill version from 1986, all of the components have been modified to meet modern sensibilities.…
This is a remix of SKREY's wall mount, allowing you to attach the Bosch AL 1830 CV charger (for “Power for All 18V Alliance” batteries) to the honeycomb storage wall. You will need four M3x20 screws to attach to the charger (this design…
Small Wall mount for Bosch Charger. Print 2x, 4 longer screws for charger needed (M3x20mm) No supports needed, print with 25% Infill
This is my take on an 1830 Game Component Organizer. It's designed for the first Lookout Edition of 1830 and here it should fit snugly into the box. My edition of 1830 contains a lot of game variants with extra tiles. I've designed the…
I printed that from PLA on side, like author said, it is better for flexibility, when you putting in the charger.
The front Bumper on my brothers rc car broke off, so i designed a spare one. its mountet like the original one, looks a little flat from the front, but its printet super easily.(and is really robust)
Foreword : Do this at your own risk, LiPo's can be spicy : ) Note that this case is designed specifically for 5x18300 cells and the IP5310 charge controller! I hate seeing useful electronics go in the trash so I collected several…
Very simple brackets for mounting a Bosch DIY tool charger AL1830CV on the wall (DIY chargers don’t have the wall mounting feature as the professional tool chargers). It uses only the 4 standard enclosure screws, no modification of…
Did part of your exhaust hanger also crack, leaving your exhaust dangling by the flex pipe or rear hanger? Well mine did, with the bushing itself still in good condition and chilling on the exhaust. This replaces the outer cast aluminium…
Bosch Charger AL1830CV SKADIS Mount with T Clip system
After using my original 3D-printed tile tray designs for several months, I decided to refactor them and add some features to improve the usability of the boxes: Rounded boxes -- All of the boxes now use rounded corners and edges that make…
A replacement for the original component with altered geometry near the hinge, which often fails. Printing with 10 walls, in vertical orientation with supports, the material that performs well at 100 degrees is nylon with fiberglass:…
UPDATE 2019-03-20 I split the money from the shares for those that use poker chips. I reduced the total dimensions of the inserts to 283 X 220 X 60, reducing the long dimension of the boxes (was 225mm) to 220mm. This should fit the…
Organizer and lid for 1830 with spots for embedded magnets and steel. I printed the lid without top and bottom layers and 3 side wall layers and it worked great while being fast. You need 3 of the trays and one lid to hold all the tiles…
A replacement front bumper for HS 1/18 rc car models 18301/18302 and 18311/18312 Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Category: R/C Vehicles
A replacement shell tower piece for HS 1/18 rc car models 18301/18302 and 18311/18312 On the first photo the 3d-printed one is on the left and original on the right. I'm planning to do a shell for the car on which you can mount a fpv and…
holder for 18300 battery salvaged from vape. remix of Miguel RL's work (also a remix if I remember right)
A replacement rear bumper for HS 1/18 rc car models 18301 and 18302 The bumper on the photo is the narrow one. I haven't had time to print the wide one but I'll update the thing when I've printed it. Print Settings Printer Brand: Creality…
This dumb insert is required to use the PCL704 / PCL704B and all aftermarket adapters attach to it, and it is not replaceable since it has been out of stock for over 6 months and no aftermarket sellers have it in stock either. Mine broke…
Honeycomb storage wall (HSW) mount for the Bosch DIY/Gardena AL-1830-AL charger. When slicing from STL, put the object with the HSW holders facing top. You will need two instances of the part. Print settings: Support is only required…
you need to print 2x token and card tray 1x train tray 1x token and card tray lid Category: Toys & Games
Use the “20 mm Small Thread, Plain Head, T-Bolt” to fix the battery mount to the multiboard: https://than.gs/m/973957 As mentioned in the original modell, use 4 M3x20mm screws to fix the mount to the charger. This model fits the…
Hey buddies! Just a simple adapter to replace the original Wifi/Bluetooth car installed on my ASRock H270M-ITX/ac motherboard, by a Dell DW1830 BCM943602BAED which is compatible with MacOS. I designed it for my new Hackintosh. 3D printing…
Changed for splited elements and little stronger.
This is a simple 3D printable bearing press insert designed specifically for MR18307 (18×30×7 mm) bearings, commonly used in bicycle hubs. It is intended for use with a DIY bearing press setup (threaded rod + washers + nuts), allowing you…
These are jigs to assist the assembly of the Faller Eurotower/Observation tower model 191830. The inner ring model is to assist with the assembly of the legs holding the roof so that they will align with the small assembly holes in the…
This is a simple box designed to fit a company's stock certificates, plus their tokens. This specifically fits the Lookout games 1830 cards, plus after market wooden tokens. How I Designed This I used a BoxSlide OpenSCAD file that creates…
This is a simple box designed to fit a company's stock certificates, plus their tokens. This specifically fits the Lookout games 1830 cards, plus after market wooden tokens. How I Designed This I used a BoxSlide OpenSCAD file that creates…
Nursery Rhyme Art - Mary Had a Little Lamb - 1830 3D printable model.
