1266 modeli
A stand for the Lego Millennium Falcon, remixed from https://www.thingiverse.com/thing:4790242 to fit on a Prusa i3 M3s+ buildplate. Basically I removed 1mm from both sides of the base, which doesn't really effect anything. If you are…
EXTRA THICK Headlight adjustment base for various GM vehicles. Some vehicles have worn out adjustment base holes, this will have with some of that. Made these to fit my specific needs on a 1992 Camaro. Printed with Glow-N-Dark ABS,…
Battery tray bottom for 1982-1992 Camaro and Firebird with battery on Passenger side.
Mitsubishi Pajero 1987 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
print from PETG 0.2mm layerheight with supports
To replace the air vent and have a support for the telephone or other.
Use 2x neodymium magnet diameter 10mm, thickness 2mm. No need glue, just push the magnet into the magnet hole.
budete potrebovat 2x M3x10 1x 0.36" voltmetr https://www.aliexpress.com/item/1005005917121603.html 1x 6x6 vypinac https://www.aliexpress.com/item/32912263133.html ano, součásti tohoto modelu jsou originální soubory na box
This is Wheel Hub Centric Rings Front and Rear for all 1982-1992 Camaro and Firebirds that are using Corvette Rally Wheels. These should fit original and aftermarket rally wheels. Printed on a Prusa Mk3s+ machine in ABS with fan disabled…
Midway Spyhunter G-6155 : 1983
Model je určen pro zkušené modeláře. Model je stejné koncepce, jako zde mnou zveřejněná dakarská Tatra z roku 1990. Pro tu jsem ale sepsal podrobný návod, doporučuji přečíst a nastudovat! U Tatry 6x6 je větší změnou pouze poháněná přední…
Bust of Wonder Woman - Gal Gadot inspired by the second film I hope you like it I also plan to make her complete sculpture Print instructions I recommend the support under her chin and her back
Mini version of the 1989 Batmobile from the Tim Burton movie With spinning wheels Support me on Patreon: Print instructions The parts should be in the best orientation already, but just in case I have included an orientation picture in…
I love the Open RC designed by Daniel Noree but I didnt just want the same car everyone else had. So I decided to design my own. And what car is more iconic than the 1989 Batmobile. Unfortunately when I deicided I wanted to design my own…
****Find all of my exclusive content on my Thangs.com profile **** Channel your inner vigilante with our 1989 Batmobile kit! The kit is roughly 9 inches (23cm) long and 4 inches (10 cm) wide. Shop the filament we used in this model on our…
31. Dec. 2023 V1.3: Simplified the hand model to ease printing Auto 9 for “Universal grip hand” added 30. Dec. 2023 V1.2: New Helmet without visor 29. Dec. 2023: Improved the hand for easier printing Based on DUMMY 13 Beta - Oct. 2023…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Also check this 2019 Godzilla: https://cults3d.com/en/3d-model/art/godzilla-figurine This is a 3D scan of a Godzilla figurine (1989/based on Toho Pictures’ Godzilla vs. Biollante) made with an Artec Space Spider by Laser Design. It had…
6/1/25: I'm adding a version with no interior (DodgeRamFull) which should be safer for kids. It prints slightly faster as there is less perimeter. The NewDodge version is nicer but when pressing on the cabin (or falling on the floor) it…
In my journey of learning Fusion 360, I took on this project as a test of my skills in design for the ease of printing, assembly and enjoyment of a quick shelf or desk top decoration or toy. The files are indexed in accordance to…
Print it with a 0.25 nozzle an layer height 0.1 mm. Update 13.7.2022: Added the STEP-File.
This remix takes the original model, cleans up its stlness, removes a small part of the back, adds a kickstand and most importantly - the wheels now rotate. You will need: black filament grey filament colour of your choice filament 2x…
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE 1988 MINI RACER is a mini version of our older 1988 racecar. SIZE / WEIGHT: Total assembly: Roughly 70 x 45 mm Filament: We used roughly 10 g of filament using 5% infill.…
Maqueta del mitico McLaren Honda MP4-4 de 1988 con el que Ayrton Senna ganó su primer mundial de Formula 1.
Modelo base sin cortes. Si por algun motivo los neumaticos no se imprimen correctamente he subido un archivo independiente para reemplazarlos. Trabajo en un mejor version tipo Kit card
Head skin piece of LUCKY 13 and MINI 13 in Mac (1984). Files: skin_head_mac - Mac machine without “hello.”, printed with no support or support enforce at the back handle part. skin_head_mac_hello - Mac machine with “hello.”, found that it…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Batman's signature weapon, the Batarang. This is based on Tim Burton's 1989 folding Batarang from the movie. This was my first time modeling with surfaces in Fusion360, it was a challenge, but worth it. Getting the lines to flow like the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
First released in 2016! OCT 2026 UPDATE My sincere apologies to anyone who has downloaded these files since I posted them here in Jan 2026. I originally included an ARCHIVE.zip of old parts for those who might need them. I did not realize…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
From the original upload: Tron recognizer from 1982 original to keep my previous lightcycle model company. This is a two colour Recognizer split into base and trim to allow for any colour combination. Enjoy
The Pontiac Fiero Mid-Engine Two Seat Coupe from 1987 was different from previous years due to the “Aeronose” front and rear. This particular body style was never offered from Plastic Model manufacturers. Since I own one of these cars I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
zv ⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on…
I bring you the most faithful version of the Batman logo from the 1989 movie starring Michael Keaton. It's the logo that appears as the Bat-signal and also on the movie poster. It's practically a perfect copy. I also added two holes of…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
EDIT/UPDATE: NEW VARIANT! Print the NEW V2 edition! its 2 diffrent part and the end need to assembly. (See on the new pictures) Now is not easy to brake the top hook! You can print now the V2 from PETG/ABS/ASA/HT-PLA Mounting for folding…
Replacement pulls to release the rear seatbacks.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚫ Imperial Dalek 1988 ⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every…
Nike Air Jordan ORIGINAL COLOR 1984 Blu
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
1989 (Taylor's Version) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
1989 Batmobile, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Here's a super handy dandy Batman 1989 Logo (you know, the one with Michael Keaton) candy dish bowl. Useful for putting stuff in! Please contact us if you'd like to have this printed for you! Check out more great home organization,…
Welcome to my first fully CAD designed 3D printable movie prop project - the grenade from the infamous scene in Robocop (1987) as used by Clarence Boddicker. If you have the capacity to do so, I recommend printing all parts in ABS as it…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚫ Sonic Screwdriver 7th Doctor ⚫ It's finally here. Another sonic screwdriver this time from the Seventh Doctor. More sonic screwdrivers coming soon! ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can look forward for.…
Zundapp KS(GTS)50 Breiband Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
A kit card of one of my favorite Corvettes the C4 1983-1996 model. The tires should spin if the axle is glued in right. I also sell these on my Etsy: https://glacierfrost.etsy.com
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A kit card of my favorite Corvette model, the 1967-1982 C3 Corvette (Technically it's the Z01 but they use the same bodywork and this isn't a high-res model.) Tires should spin if axle is glued on right. I also sell these on Etsy:…
Deckard Type - Blade Runner 1982 - BIC Lighter Sleeve Cover - Cover accendino BIC This a Blade Runner 1982 style 3D printable Bic lighter sleeve Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
1988-94 GM c1500 Truck Radio Head Replacement Pocket Based On American International GMP333 Design. I've never printed this. I just designed it in CAD so that I could preview what various OLED screens might look like in the unit and how I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The “real” Volkswagen counterparts to these models have a propensity to spontaneously vanish from the vehicle, due to aging plastics and a harsh, vibration- and wind-heavy environment. I have literally never seen an actively-driven…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
3D Printed Model of a Countach
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I designed the basic dimensions based on the 191 819 707 C or 191 819 719 B (Both are written on the same part), feel free to remix it to fit a gauge for example, sadly the “max” hole size is 45mm but you can probaly get up to 49mm with…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I bring you the most faithful version of the Batman logo from the 1989 movie starring Michael Keaton. It's the logo that appears on the Batsuit and goes on the chest. It's practically a perfect copy. I also added two holes, approximately…
![Doctor Who - Imperial Dalek [1988]](https://media.printables.com/media/prints/91571/images/7871487_3222b998-93ee-4a4f-a810-50b3e5d2f2cd_18dda337-2035-4968-b9b4-9c14df6878b8/gg2.png)
