P
Printablesthall72
Lego Compatible (2446.dat) Minifig Helmet Modern
This model is compatible with the lego system.
- Pobrania
- 878
- Polubienia
- 64
- Ocena
- 5
Wyniki wyszukiwania: 244
Liczymy pasujące modele…
P
Printablesthall72
Lego Compatible (2447.dat) Minifig Helmet Visor
This model is compatible with the lego system.
- Pobrania
- 708
- Polubienia
- 58
- Ocena
- 5
P
Printablesthall72
Lego Compatible (32449.dat) Technic Beam 4 x 0.5 Liftarm
This model is compatible with the lego system.
- Pobrania
- 681
- Polubienia
- 29
- Ocena
- 0
P
PrintablesLjhtom (Javier Hernando)
3244_Kitchen cabinet organizer ikea uppdattera
Added split pieces to be able to print them in printers with small beds. Base 1 of 2 and Base 2 of 2 Print two nestable 296 x 238 plates total 296x476 , to get a practical plate with holes every 20x20 mm, and make your own distribution of…
- Pobrania
- 455
- Polubienia
- 89
- Ocena
- 4,75
P
PrintablesN7 Cat
Pump Jet (32mm 2212/2216/2217/2440 Motor)
An offshoot of my project https://www.thingiverse.com/thing:4606971 RC Pump Jet boat, I modeled a stand alone water jet originally intending boat to be modular in design. After consideration I decided to just integrate the pump jet with…
- Pobrania
- 424
- Polubienia
- 54
- Ocena
- 0
P
Printablesthall72
Lego Compatible (2445.dat) Plate 2 x 12
This model is compatible with the lego system.
- Pobrania
- 418
- Polubienia
- 33
- Ocena
- 0
P
PrintablesMichael
Anschlagpuffer Bumper similar to Opel 0176731 GM 24427457
German: Anschlagpuffer Heckklappe für z.b Opel Vectra C Teilenummern: Opel-Nummer: 0176731 GM-Nummer:24427457 English: Bumber tailgate for example Opel Vectra C Part Numbers: Opel-Nr: 0176731 GM-Nr:24427457 Note: This is not a original…
- Pobrania
- 395
- Polubienia
- 7
- Ocena
- 5
P
PrintablesLuke96
Fiat Ducato 244 2002-2006 7 inch Chinese radio bracket
Original document holder must be modified. Use double side tape (or glue) and 4 screw for each side. Print twice (one mirrored) It is for 7 inch 1din radio. Might be used for 2 din (I didn't try it)
- Pobrania
- 388
- Polubienia
- 33
- Ocena
- 5
P
Printablesthall72
Lego Compatible (42446.dat) Bracket 1 x 1 - 1 x 1 Thin with Stud Hole
This model is compatible with the lego system.
- Pobrania
- 377
- Polubienia
- 41
- Ocena
- 0
P
Printablesthall72
Lego Compatible (2449.dat) Slope Brick 75 2 x 1 x 3 Inverted
This model is compatible with the lego system.
- Pobrania
- 363
- Polubienia
- 33
- Ocena
- 3
P
Printablesthall72
Lego Compatible (42445.dat) Bar 12L with Plate 1 x 2 with Solid Studs and Hollow Stud
This model is compatible with the lego system.
- Pobrania
- 277
- Polubienia
- 29
- Ocena
- 0
P
Printablesd3d89BHD
Low Poly Snorlax - 244 faces
I like the look of this model so decided to download and play with it - but although it looked low poly, it wasnt. So before I messed around with it and really simplified the geometry. This is not my design - I wanted a much lighter poly…
- Pobrania
- 216
- Polubienia
- 7
- Ocena
- 4,75
P
Printablesthall72
Lego Compatible (99244.dat) Minifig Headdress Rabbit
This model is compatible with the lego system.
- Pobrania
- 205
- Polubienia
- 29
- Ocena
- 0
P
Printablesthall72
Lego Compatible (2444.dat) Plate 2 x 2 with Hole and Split Underside Ribs
This model is compatible with the lego system.
- Pobrania
- 181
- Polubienia
- 20
- Ocena
- 0
P
Printablesthall72
Lego Compatible (42444.dat) Minifig Hair Peaked
This model is compatible with the lego system.
- Pobrania
- 181
- Polubienia
- 22
- Ocena
- 0
P
PrintablesJiří Sobota
Volvo D5 D5244T Head gasket keychain
Volvo headgasket keychain of D5244T Diesel, 5 cylinder Volvo engine. Scale it as you want Printed on SLA printer
- Pobrania
- 151
- Polubienia
- 16
- Ocena
- 0
P
PrintablesVollesBrot
Bruder Excavator 2445 - Drill
Replace the shovel from the Bruder excavator with a drill. I have changed the mount of the original so that it fits on the Bruder 2445 excavator. the drill bit is also slightly shorter
- Pobrania
- 126
- Polubienia
- 16
- Ocena
- 5
P
PrintablesVollesBrot
Bruder Excavator 2445 - Rotating drill
Replace the shovel from the Bruder excavator with a rotating drill. Mount fits the Bruder 2445 excavator or similar excavators. The model consists of 3 components: Mount Pin Drill Assembly instructions: The pin is inserted through the…
- Pobrania
- 125
- Polubienia
- 11
- Ocena
- 0
P
Printablesthall72
Lego Compatible (42443.dat) Minifig Headdress Werewolf
This model is compatible with the lego system.
- Pobrania
- 120
- Polubienia
- 27
- Ocena
- 0
P
Printablesfromfiletofield
Star 244 RC 1:16 – Cab Assembly + 3D Printable Files
🇵🇱 Polski Drukowana w 3D kabina do modelu RC Star 200/244 w skali 1:16. Pasująca do podwozia WPL RC B24. Wejście w świat RC nie musi być drogie! :) Kabina to pierwsza część projektu udostępniona do pobrania. Prace nad kolejnymi elementami…
- Pobrania
- 118
- Polubienia
- 33
- Ocena
- 0
P
Printablesthall72
Lego Compatible (2441.dat) Car Base 7 x 4 x 0.667
This model is compatible with the lego system.
- Pobrania
- 111
- Polubienia
- 17
- Ocena
- 5
P
PrintablesaffeOHNEwaffe
The Over-engineered Backpack Wall Mount V2 by @HalfDecentEng_222443 Remix
Full credit for the design, hook geometry, and construction goes to the original creator—this remix merely adjusts the orientation of the mounting hole. Print settings: PETG, 15% infill, "Gyroid" infill pattern, 3 wall lines. No support…
- Pobrania
- 95
- Polubienia
- 29
- Ocena
- 0
P
PrintablesPepper
FoodSaver V2244 Clip
A friend asked me to make a replacement for a broken clip on their bag vacuum sealer. Flip in your slicer of choice to make a clip for the right side.
- Pobrania
- 89
- Polubienia
- 3
- Ocena
- 5
P
PrintablesKJ.
Jaguar Seat Belt Webbing Retainer GJA2447AA
Jaguar Seat Belt Webbing Retainer GJA2447AA Updated version, A seatbelt retainer for Jaguar X100 (XKR & XK8), this model is for the right or left handside A pillar. Print in picture is done with eSun PLA+ bone white, which does match a…
- Pobrania
- 80
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNils
Fiat Ducato 244 Headrest hook
Goes in between of the fixations. You need to undo the headrest. It is compatible when the headrest stands have a diameter of less than 12.5mm and a distance (center to center) of 180mm (i.e. a clearance between the stands of 180-12.5mm).…
- Pobrania
- 74
- Polubienia
- 17
- Ocena
- 0
P
Printablesthall72
Lego Compatible (24496.dat) Minifig Hat Ninja Wrap
This model is compatible with the lego system.
- Pobrania
- 72
- Polubienia
- 23
- Ocena
- 0
P
PrintablesMurdogk
Lego 3020 3021 3022 3795 3034 3832 2445 91988 4282
Lego 3020 3021 3022 3795 3034 3832 2445 91988 4282
- Pobrania
- 66
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAndrew Plaza
Protectli VP2440 10" Rack Mount (1.5U/1U)
a rack for the VP2440. I did not see anyone else design one yet so I made it. It is my first 3d model with fusion so will be updating it as feedback is received. Designed so that the protectli sits at the top of a DeskPi Rack. At the top…
- Pobrania
- 50
- Polubienia
- 2
- Ocena
- 0
P
Printablesdelooper
Sharp AQUOS remote battery cover - GB244WJSA
The battery cover for my remote control snapped off. This includes both a .stl file for a replacement, and the .scad file used to generate it. This cover is a little more beefy than the original -- depending on what type of material you…
- Pobrania
- 49
- Polubienia
- 4
- Ocena
- 0
P
PrintablesNils
Fiat ducato 244 rear view mirror rack
Someone…. Must have given the rear view mirror a slap Quite some Plastic broke on the inside. "Wait… what is this for?" You can control the orientation of the mirror by buttons on the inside. These control a small motor-gearbox-assembly…
- Pobrania
- 34
- Polubienia
- 10
- Ocena
- 0
P
Printablesblack-ucsus
WLToys 244016 1/24 micro-b Chassis frame (v2 added)
ABS printable
- Pobrania
- 32
- Polubienia
- 5
- Ocena
- 0
P
PrintablesStawiamKlocki.pl
Display Stand for Welly WE22441 DeLorean DMC-12 Time Machine Back to the Future Part 2
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKarel Soucek
gear for grain grinder Grain mill for food processors 00461244 - MUZ4GM3
Gear inside of Grain mill for food processors 00461244 - MUZ4GM3 often breaks. This is simple replacement. Print Settings Printer Brand: RepRap Printer: Prusa i3 1.75 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 mm Infill: 100% How…
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMrFixIt87
Urethane Belt for Task Force 90181 Band Saw (and possibly Craftsman 113.244513)
This is the urethane belt used on the Task Force 90181 10" band saw wheels. This also might possibly fit the Craftsman 113.244513 10" band saw since these two saws are identical looking. Printed in 95A TPU this fits my Task Force 90181…
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDolores Bitty
Hotshoe for Canon Speedlite 244T
Well, I dropped my speedlite, now what? AH RIGHT I HAVE A 3D PRINTER! Modeled after the actual piece. 1/1 scale.
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
Printablesa69291954
Snap on headset holder for LG Flatron W2442PE
A headset holder which simply snaps on the Frame of a Flatron W2442PE or other modells which have a similar frame. Since it needs tight tolerances to work i doubt it will work an other Monitors. 20160303: Update v4 prints without support…
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesN.E.R.D. Inc.
2440 Motor Water Cooling Jacket
This is a water cooling jacket for a 2440 motor (I designed it around a KingVal 2440 motor. Make sure that it's oriented correctly, it should print with no supports, If your slicer is adding supports, flip it 180 degrees. There are 3…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPatPend
Insteon Mini Remote Wall Mount Bracket p/n 2444B4
A printable version of the Insteon Mini Remote Wall Mount Bracket. This is like the original version for mounting against a wall. The switchplate screws self-thread into the holes in the plate. Check out my other Insteon Mini Remote…
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGiovanni1954
ARTE&DISIGN GT244
ARTE&DISIGN GT244 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
- Pobrania
- 18
- Polubienia
- 7
- Ocena
- 0
P
PrintablesTRDVBuilds
Videx a244rh mount
A replacement mount for Videx a244rh flashlight
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
Printablesengineer27
Replica of Heritage Miniatures #1244B
This is a replica of the classic figure B from the Heritage Miniatures Dungeon Dwellers blister pack number 1244, "Kobolds". (see…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
Printablesfromfiletofield
Star 244 RC 1:16 elementy poprawiane i łatwiejsze do druku
Link do moich oryginalnych plików kabiny. https://www.printables.com/model/1886059-star-244-rc-116-cab-assembly-3d-printable-files Aby nie robić bałaganu w plikach kabiny ... Będę tutaj publikował poprawione wersje elementów, wprowadzone…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesnalkinburgh
Feet and Caps for Organize-It Shelves (Model SH12244SR)
Designed the feet and caps for the Organize-It Resin Shelving System Model #SH12244SR purchase at BJ's. Printed with PLA at .28 layer height for speed. Didn't need it to be pretty.
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesone
mATX Motherboard 10in Rack Mount (244^2mm)
Uses M3 heatset inserts and standoffs to mount a standard-size mATX motherboard (244mm x 244mm) inside a 10in rack. Specifically designed to fit the KWS Rack v.2 Links (contains affiliate links; as an Amazon Associate I earn from…
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGiovanni1954
ORGANIZZATORE GT244
ORGANIZZATORE GT244 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
Printablesengineer27
Replica of Heritage Miniatures #1244A
This is a replica of the classic figure A from the Heritage Miniatures Dungeon Dwellers blister pack number 1244, "Kobolds". (see…
- Pobrania
- 13
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMPDev
Hyundai WS2244 sensor wall mount
Stable wall mount for Hyundai WS2244 outdoor sensor (for weather station). Print Settings Supports: No Resolution: 0.16 Infill: 20% Filament: PETG Notes: Print with PETG for better endurance.
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGuybrush T.
Tormach 32447 Engraver Protective Cover
Quick and simple protective cap to fit the Tormach diamond drag engraver #32447 https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=32447 . This protects the tool and your hands from accidents when the tool is not in use.…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
Printablesjohnolinda
Viewsonic 2448M Foot
This replaces the stock foot for the Viewsonic 2448M monitor. I recommend printing in PETG to avoid warping over time. Mine has been in use for about 9 months without any warping or cracking.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSherghan
BX2440 2 Cricket LED
Model This adapter allows to attach your Inspire Cricket LED monitor lamp below a Samsung BX2440 monitor. This gives a low, stealth light covers working area of the desk even under your hands if you lift them slightly. It does not hit…
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
Printablesscopecat
VP2440 10" Rack Mount
Print as oriented. I used M5 screws to attach it to my rack. I used 4 perimiters and 25% infill because the VP2440 is very heavy.
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPitr
Eta 5244 Leone
Prasklý kontakt na nabíjecí stanici. Reklamace neuznaná tak jsem vytvořil vlastní a dávám kdyby měl někdo stéjný problém.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPavel Bogatyrev
Apple Magic Keyboard A2449 — Simplified Envelope Model
A simplified dimensional 3D model of the Apple Magic Keyboard A2449. The model was created using AI-assisted 3D generation, manual measurements of the actual keyboard, and manual editing. It reproduces the approximate external dimensions,…
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printables
Fiat Ducato 244 2002-2006 7 inch Chinese radio bracket
Original document holder must be modified. Use double side tape (or glue) and 4 screw for each side. Print twice (one mirrored) It is for 7 inch 1din radio. Might be used for 2 din (I didn't try it)
P
Printables
Eta 5244 Leone
Prasklý kontakt na nabíjecí stanici. Reklamace neuznaná tak jsem vytvořil vlastní a dávám kdyby měl někdo stéjný problém.
P
Printables
Lego Compatible (24496.dat) Minifig Hat Ninja Wrap
This model is compatible with the lego system.
P
Printables
Low Poly Ferrari 244 GTK STANCEWORKS
Welcome to The Low Poly Auto Show! This is a Ferrari 244 GTK and it's incredibly special. It is originally a Ferrari 308 GTB, modified by STANCEWORKS, and renamed a 244 GTK. Check out the YouTube channel made by Mike Burroughs and support…
P
Printables
.244 H&H Magnum Cartridge
Model of the _ cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth and cheap to…
P
PrintablesStawiamKlocki.pl
LEGO Speed Champions F1 2025 Modular Display Stand - 77242, 77243, 77244, 77245, 77246, 77247, 77248, 77249, 77250, 77251
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
- Polubienia
- 24
- Ocena
- 0
P
Printables
RAK7243/RAK7244 wall holder mount
wall mount that lets you quickly attach and remove your RAK7243 or RAK7244 gateway from the wall Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Infill: 40% Filament: Overture PLA White How I Designed…
P
PrintablesThe Low Poly Auto Show
Low Poly Ferrari 244 GTK STANCEWORKS
Welcome to The Low Poly Auto Show! This is a Ferrari 244 GTK and it's incredibly special. It is originally a Ferrari 308 GTB, modified by STANCEWORKS, and renamed a 244 GTK. Check out the YouTube channel made by Mike Burroughs and support…
- Polubienia
- 89
- Ocena
- 5
P
Printables
![Display Stand for LEGO Star Wars 75244 [last update 9.04.2024]](https://media.printables.com/media/prints/838441/images/6457752_2a10b0f1-1601-4a7d-917b-37faffdff662_b6d517c1-7761-494c-9fc4-eb80a430404b/75244-4.jpg)
Display Stand for LEGO Star Wars 75244 [last update 9.04.2024]
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
P
Printables
Clip for E53 steering column cover (51458244292, 51457074993)
The clip for the steering column cover breaks easily and at that point you either live with the ugliness, you buy a brand new cover or… you 3D print this! I recommend you print using black ABS.