Liczymy pasujące modele…
Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…
The crevice tool of the original 3in1 nozzle of my vacuum was to short and to wide to get into any crevice, so i made a new one. The openings inner diameter is 35mm, decreasing to 34mm along the way to ensure a good fit. The flattened…
Congratulations on your sobriety milestones—24 hours, 7 days, and 30 days are significant achievements. Sharing your journey by creating and releasing sobriety chip designs on platforms like Thingiverse and Printables is a commendable way…
Changement de couleur sur le modèle à 100%: 1ère couleur (Fond) : 0 →2.2mm 2ème couleur (Lettrage) : 2.2 → 3.0mm 3ème couleur (Circuit) : 3.0 -→ 4,0mm
Stackable 24HP block of Eurorack that can be expanded to a full case with more copies of itself and standard M3 nuts (square and hexagonal) and bolts.
Ferrari 340 MM 24h Le Mans 1953
No supports needed. Just print. Optionally you can secure it with a thick 2-sided tape. Feel free to adjust and modify to suit your needs - i include the flat .svg vector profile for Cintiq 24HD, that can be used as a base for your…
The 1960 24 Hours of Le Mans was the 28th 24 Hours of Le Mans Grand Prix of Endurance, and took place on 25 and 26 June 1960, on Circuit de la Sarthe. The prospect of a duel between the 3-litre (180 cu in) Ferrari versus the 2-litre (120…
Scuderia Ferrari directly supports this car with chassis number 0320, the only one of the four, present in 1953 at Le Mans, to arrive at the finish line. The two Pilots Paolo and Gianni Marzotto would finish fifth at the distance, having…
I made this model to teach my kids the analog clock. It prints reasonably fast, and does not use too much filament. The minute markers and the numbers can be colored with a filament change. NB: This is only a learning tool. It is…
Clamp Clamp incorporating a compliant mechanism, printable without support. Produced in 24 hours for the third edition of the 24H 3D Print Polytech Tours . This model responds to two themes simultaneously proposed during the competition:…
Chase for desk clock space invaders arcade Maschine has to scaled by 10 to fit to the other parts.
Wanted to secure my pen cut to the Cinque 24HD, regardless of Angle. clips to lower left edge
Medical Bottle Small bottle with glass and compartment for storing tablets. Made in 24 hours for the second edition of the 24H 3D Polytech Tours . It responds to the theme of medicine, with the aim of making it easier for sufferers…
I've done it in PLA and TPU98a. I painted with a sharpie the asphalt parts… :)
I had to rebuild my Stealthburner front panel because I accidentally installed it off-by-one pin. Do this right, and it applies too much voltage to the LEDs and lets the smoke out of a small logic buffer on the HartK PCB with Fan LEDs . I…
Its an extrusion from GPX data file about 30 laps in 24h MTB race in Coruche (Portugal) 2023. All done in single speed. I got 2nd place in Solo Single Speed.
It´s an extrusion from GPX data file about 30 laps in 24h MTB race in Coruche (Portugal) 2022. All done in single speed.
Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…
This is a remake of shiura's Triaxial Numechron Clock , which i did as a school project. Here is the main changes that has been done to the original design: The 12-hour wheel has been replaced with a 24-hour wheel. The numbers on the…
Bonjour, je vous partage ma création du circuit mythique sarthois des 24 heures du Mans, incluant la maison blanche et le Bugatti. La taille réelle une fois imprimé fait 80 cm. Imprimé en PLA + esun black inclus Le logo 24 heures du Mans,…
This was done quick and dirty as the weird wobbly clip style stand that came with my Lenovo 500 RGB 1080p +IR webcam mount broke during a work video conference and I had to design a replacement to get back online. I cut off the broken…
Get that pesky air moving. Good for getting colder air inside during night. Uses 150x24mm fan. I used https://www.delta-fan.com/AFB1524HH-AF00.html Case is nearly snap fit. You can glue it or put tape around the seam if you like to. Just…
Das ist meine zwei eigene Kreation. Zweifarbiger Druck mit Magentplatte an Whiteboard befestigt.
Orion Fan OD4010-24HB01A with tachometer. Frame dimension is accurate since it is a 3D model from manufacturer.
![Clamp [Participation : 24H Polytech 3D Print Tours 3rd Edition]](https://media.printables.com/media/prints/892867/images/6879185_447a3522-7b25-4d68-b58d-30d02bfbe250_dbf41c7f-7a7a-45cb-bfef-b707d410170e/clamp-0-presentation.png)
![Medical Bottle [Participation : 24H Polytech 3D Tours 2nd Edition]](https://media.printables.com/media/prints/892861/images/6879172_31e68c6a-0003-46f6-ab92-e1b056bc0eb7_1e65484f-aa88-461f-a109-2763a4982aed/bottle-0.png)
