Liczymy pasujące modele…
This is a Temperature project for PETG with temperatures starting at 220 to 265. Just open the project, insert the filament, and print. The temperatures will change automatically.
Using the following options: Base_Temperature = 240 Number_of_Steps = 6 Material = ASA Temperature_Order = 0
Swappable thermal wing for the Lukisegler rc-glider This wing is designed for the Lukisegler rc-glider ( https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider ) to give it better thermal gliding properties. You can…
Scaled up nexty's 18650 battery spacer to accommodate 32650 battery size. I need just a few spacers for my LiFePo4 12v pack so it make more sense (and faster) to print it than buying on ebay. The dimension of this spacer is: 35.8mm x…
What is this? This is a 3d printed addition for the VEX V5 controllers that allows for drivers to have better control over their robots during a match by allowing them to press buttons on the top of the controller through durable levers…
Quick part to support your Lego Mustang on a wall!
a lego piece inspired by the lego 2654 piece.
M104 S260 ; set the current hotend temperature to 260 degrees Ender 3v2 neo
A simple and quick printing battery spacer for the Liitokala LiFepo4 cells. Allowed for big tolerances. Possible to print with upto 0.6mm size nozzle without a problem. The batteries i used: https://s.click.aliexpress.com/e/_9hWKUw…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/jFroFppcWhO
This is WIP I'm still playing with the rivet (as I have split rivet and bracket to make it slightly easier to print. Description This is a redesign of the original BMW holder for the warning triangle that goes in the left hand side of the…
Now With Assembly Instructions! Oliver 2655 4WD - 1:16th Scale Uses M2 and M4 screws Uses two 6.4mm diameter x 178mm (1/4in diameter x 7in) rod for axles Parts that need M2 and M4 holes drilled have indents.
This model is compatible with the lego system.
Heavily inspired by this design: https://www.printables.com/model/494301-gridfinity-wiha-7pc-precision-screwdriver-tray-for Matches my other design as well:…
This model is compatible with the lego system.
Case to hold 4pcs 32650 6Ah cells with screw terminal or 32700 cells with solder terminal.
Imported from my designs on Thingiverse. Original upload was 13.09.2019 (dd.mm.yyyy) I do most mechanical design. Can maybe do easy som very basic patching. Here my version of the part 6265644 which comes with the new 42099 truck. Print…
with at layer heigt off 50 layers pr 5c(depends on layger height offcours) from 215 to 265 Category: 3D Printing Tests
***DO NOT SELL*** ASK ME ABOUT TERMS/CONDITIONS ABOUT SELLING I saw this thing that I really liked for my filaments. I tapped on it. But I soon realized that it needed wood!! And I was very lazy. So I made one myself. It took me 1 hour…
When I was printing the gaaZolee's tower on Thingiverse, I found that the tower flexed somewhat during printing especially at the higher levels / cooler temperatures. This led to an artificially worse print for the given temperature as…
raspberrypi5 compact case with 2mm thickeness + x1001(nvme adapter) + ssd1306 case + official active cooler m2.5 flat nuts(x6) and 16.5mm standoffs(x3), which containing in x1001 Jan 28th, 2024 - SSD1306 was moved through other side, and…
lego 32028 4510 30586 4216 88393 4217 2653
Designed with ABS in mind for the marine environment in lots of sunlight. Printed on Bambu P1P with standard 0.2mm layer height. This was modeled in the non-commercial version of fusion, this design is not a 100% copy of the original…
This is a simple Skadis holder for C cells (26500) inspired by popular AA / AAA dispenser type. The “holding bar” may not be necessary, but it helps with stability and better cell distribution. Small bed support are needed for the hooks.…
I designed this because I don't trust the tiny MOSFETs on the RAMPs board any more than I trust the ones on the factory Anet board, but the MOSFET was hard to mount in any reliable or attractive way. This has a standoff of around 12mm to…
This is an expedient way to mount a T265 camera and provide a minimal level of protection. We used this for our FTC robots in remote competitions (but used more robust protection for the traditional in-person matches). The bumper case…
A compact lightweight 2W solar repeater for Meshtastic. Multiple mounting options are available including a tripod option with included antenna mount. There are a number of requirements to build this node. Specifically: Compatible with…
For basic testing of 3DXtech Obsidian v2 (PA6-CF) with a Core One+. The G-Code is for regular flow 0.4mm and 0.6mm nozzles. It seems to print pretty well out of the box using the Prusament PA11-CF profile as a starting point. I'll…
We've built a neat ethernet cappable ZigBee Coordinator for use with zigbee2mqtt, io.broker and alike. It can be bought here: https://shop.codm.de/automation/zigbee/40/zigbee-cc2652p2-tcp-ethernet-coordinator It's based on the CC2652P2…
Cookie stamp Pi 3,14159265358979323846
Remix of the LaunchXL Enclosure by millibyte for the TI LaunchXL CC1352P-2 (longer than original because of PCB-Antenna and SMA-Socket) Changed some details to make it fit M3 Screws from the bottom and added the Zigbee 2 MQTT Logo :) Hope…
Remix of "18650 battery to 26650 adapter" by Orjakari (thingiverse.com/thing:4187707). 20700 to 26500 / 26650 battery adapter Snug fit. Tested with Sanyo NCR20700B 4250mAh lithium cell. The fit depends on your printer settings and the…
Wall Mount for ENT Wooddrills with countersink
A simple wall mount for Electrolamas popular CC2652R zig-a-zig-ah! (zza)
This design snap fits to the ice cube bin inside the freezer drawer of the LG model #LFXS26596S refrigerator. I don't know if other LG models share the same bin and configuration. Print settings: I printed with PETG; I suspect PLA would…
Edited to allow the leg to be printed in two parts to fit onto the build plate, removes the requirement to glue the pieces together.
Holds the Wiha 26590 Precision Nut Driver Set. Solidworks and STEP files are included for remixing. The finished assembly requires 4 M3 x 20mm screws (McMaster PN: 91292A123 ) and 4 3/8" adhesive backed bumpers (McMaster PN: 95495K931 )…
Remix for Vyper Build Plates with 265mm x250mm with more Honeycombs reducing the Filamentusage by 15%!
Gear bread slicer - repair. Designed in ONSHAPE .
Our team used T265 cameras on our Freight Frenzy robot. Due to the high cost of the T265 (and limited availability due to being discontinued), the mentors became concerned about the vulnerability of these devices to robot-on-robot…
Tiskněte s ručně zvolenou těsnou podpěrou jen spodního vnitřního osazení (horní je v úhlu, nepotřebuje podpěru) Rozlomené hrdlo zakraťte (např. pilkou) až k hraně originálního výřezu. Nechte delší a dobrušujte tak, aby při nasazení…
The original Xiaomi Beebest F1 can't use 18650 lithum rechargable battery due to short height because the spring and casing limited. So I designed this one to make extra room which helped the beebest f1 being able to use 18650-22650…
A simple press fit and slip over top for CircuitSetups v2 Zigbee stick https://circuitsetup.us/product/usb-zigbee-stick-z-stack-coordinator/ Note: only for version 2. Printing: I used PETG, 0.6mm nozzle. Should work fine with almost…
This is a pair of IO shields for the IN-WIN IW-RF100S-S265 1U Short Depth Mini-ITX Rackmount Server Chassis. Both a blank one and a plate with cutouts for a N150 NAS/Router board "10G 2*i226-V 2.5G 3LAN NAS Motherboard" as seen on…
The USB stick is fragile and the USB port tends to bend easily as the protective plastic around the stick opens very easily I designed a simple 3D model that prevents the cover from opening and limits the possible looseness that allows…
Mein Remix vom Gehäuse von cod.m. Ich habe noch zwei Schraublaschen und Lüftungslöcher zum bestehenden Gehäuse hinzugefügt. Ansonsten ist das Original Gehäuse echt Top und passt super zur Platine. Die Platine gibts hier:…
For my towel holder https://www.printables.com/de/model/533856-flexible-holder-to-fill-cardboard-tubes-of-differe see last picture, I'll need a better tear-off edge for industrial paper towls. This blade is 265mm long, the teeth have ~5mm
Dust cap for Haltec H-5265 tire valve quick connect air chucks. While airing up and down 4 tires at once, the caps reduce the risk of getting sand in the chuck locking mechanism. Rear part prevents sand to get in from the back, use…
shroud made for a minimal barrel length of 265mm
Gridfinity compatible bin which can hold 3x 22650 batteries
Split in meshmixer. Category: Sport & Outdoors
The Maytag MTB2656AEW top-mount refrigerator freezer shelf brackets allow the wire shelf to rotate open. These brackets replace the existing brackets when they have failed. The OEM parts are removed by using a flat-blade screwdriver in a…
A STL if you bought the 8 piece set and just want to print A Fusion file if you want the profiles to build out your custom tray. Vertical unit size of 3 for stack-ability while being as compact as possible. Note that the Pico series…
Since I could not find a stand for this beautiful Lego, I have designed one that can be placed in a desk or a shelf
The replacement part is for alot of VAG models. Part number: N 102 265 01 The model is to be printed from TPU 95A Recomended print orientation is with the big logo towards the build plate . It is an tight fit, so as little as possible…
Version 4 - bigger cable channel (5mm) + lid to close the PCB with voltage stabiliser. A dummy C-size cell that lets a 3.6 V battery-powered device run off an external supply instead of eating a primary lithium cell. The body copies the…
We use Sheffield air measurement machines to inspect hole sizes. The air lines are always open and make a hissing sound. This block will hold the 2 gages I most commonly use ( .1265 & .1304") and it muffles the sound so I don't hear it…
button for microwave oven
The parts you can find on Amazon for about 51$. You need a ZK2265C Power Supply, a double set of pos/neg leads, and some banana plug and socket combo. The 100v voltmeter I had laying around but originally came from Amazon too for about 5…
Now With Assembly Instructions! Oliver 2655 4WD - 1:16th Scale Uses M2 and M4 screws Uses two 6.4mm diameter x 178mm (1/4in diameter x 7in) rod for axles Parts that need M2 and M4 holes drilled have indents.
Gridfinity compatible bin which can hold 3x 22650 batteries
This is a pair of IO shields for the IN-WIN IW-RF100S-S265 1U Short Depth Mini-ITX Rackmount Server Chassis. Both a blank one and a plate with cutouts for a N150 NAS/Router board "10G 2*i226-V 2.5G 3LAN NAS Motherboard" as seen on…
This model is compatible with the lego system.
A STL if you bought the 8 piece set and just want to print A Fusion file if you want the profiles to build out your custom tray. Vertical unit size of 3 for stack-ability while being as compact as possible. Note that the Pico series…
Since I could not find a stand for this beautiful Lego, I have designed one that can be placed in a desk or a shelf
We've built a neat ethernet cappable ZigBee Coordinator for use with zigbee2mqtt, io.broker and alike. It can be bought here: https://shop.codm.de/automation/zigbee/40/zigbee-cc2652p2-tcp-ethernet-coordinator It's based on the CC2652P2…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This model is compatible with the lego system.
TP-Link EAP265 adapter plate to fit Julsen's EAP613 stand Uses the 4 hole mount and adapts to the 3 hole pattern for the EAP265. Adapter plate recess and pins fit nicely into the 4 hole mounting of the stand. No glue required but you…
This is a mount for the Axis P1265 MkII camera mount inside the CORE One enclosure I prefer hardwired everything and less on the WiFi, Axis offers the P12 series as POE cameras with a small head, perfect for this application Suggest…
This model is compatible with the lego system.
Fully modelled Lego Set. Assembled and modeled identical to the assembly guide for the real set.
I created this parts to replace the old one on my Mercedes V-Class W638. I printed them with PETG 0.1mm and it works proper
Print it flat - the opening to the bottom Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 50% Filament: Anet PLA is possible Blue Category: Hand Tools
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: .2 Infill: 25 Filament brand: Overture Filament material: PETG
Background I liked matthijsbos holders for Wiha precision drivers for the simplicity and compact design. I remixed to fit my specific 7pc Wiha 26592 set. Printing Printed @0.3mm layer, 3 perimeters, 10% fill, no support needed.
A mount to fix the Depth Sensor D435i and Tracking Sensor T265 together.
This is a 32650 battery cell holder. This a redesign/remix from one I found on thingiverse. It uses the popular Keystone 209 contacts ( Amazon or Newark or other places) The one on Thingiverse was just a little too small for my cells that…
insert 00.65" trimmer line for spring Run down here: https://imgur.com/a/QUUIJK0 Category: Machine Tools
This model is a remix of @manuelk 's model to fit my 265mm Kataba saw. Printed it in Fillamentum Flexfill 98A TPU 0.2mm Layerheight
This model is compatible with the lego system.
This model is compatible with the lego system.
ORGANIZZATORE GT265 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
This model is compatible with the lego system.
