Liczymy pasujące modele…
NOTICE: Use extreme caution when working around high voltage and high current devices! Please seek assistance if you are not comfortable working with power supplies. Update 12/09/21 - Increased overall length by 10mm to allow more space…
I used canopy model from GrabCad and tinkered simple mount for GPS. I used black PETG till layer 86, paused, changed filament to TPU, reduced temperature and printer the upper part with it. Came out nicely. But it can be fully printed…
For this particular project I used 500W ATX power supply. Additional parts: 1x 2A USB socket 8x 4mm banana type connector 1x power switch 1x Buck boost power module Printed with PETG 0.2mm
This is a cover/protection for a blue 16A/230V 1 phase wall outlet (feeder). A 1/4 turn locks the cap. Fastening eyelet for a cord present, so that you do not lose the cap.
Mit diesen Adapter Teilen und dem Jarolift 230v Motor kann mann jeden Velux Rollladen umbauen. Umgebaut habe ich bei mir das Velux SK06 und FK06, diese betreibe ich nun mit einem herkömmlichen Rolladenschalter und mit einem Shelly 2.5…
For my new hybrid car from mercedes I wanted to have a wall mount for the small "Wall Box" that is needed to charge the car at home with 230V. There is nothing like this on the market so I created a wall mount in Onshape. There are two…
Materiál co jsem na tento model zkusil použít je PLA, ale myslím si že bude lepší PETG.
I remixed these awesome designs to incorporate a handle and make it fit securely without drilling holes in to the Power supply and other stuff Revisions: added a handle to the top added a backplate with M3 brass inserts (4mm hole) made…
12x12 mm Nano GPS mount to keep track of your flight safety, speed data, etc. It doesn't require long screws; you can use the original ones. It's installed under the antenna mount and is very lightweight.
Here is a remake of my bench power supply. The power supply provides a useful regulated DC voltage, adjustable from about 0.5V to 30V DC at 4A. The power supply is based on the FNIRSI Step Up/Down 50W Power Module. This improved design…
Since I had a bit of water come into the 230V CEE plug I added to my VW T4 camper I designed a cover for it to keep it dry when not in use. It is designed to be printed from TPU so it can seal properly and keep moisture/water out. These…
Gehäuse für 230V Unterputz-Steckdose mit Shelly Plus 1PM Dieses 3D-gedruckte Gehäuse wurde entwickelt, um eine herkömmliche 230V Unterputz-Steckdose sicher aufzunehmen und die Steuerung über einen Shelly Plus 1PM zu ermöglichen. Es eignet…
Držák na vidlici 230V třeba na pračku. Určený pro přilepení oboustrannou lepící páskou na obklad. Materiál: PLA Vrstva: 0,2 Podpory: všude
Easy to build lab power supply from cheap eBay parts. What you will need: Power Supply unit: eBay Search Spare laptop power supply (I use one with 19.5V DC / 4.9A) Some black/red/yellow wires (from old PC power supply) Female banana panel…
tisknuto z PLA, pasuje perfektně na běžnou prodlužovačku se zaoblenými boky.
Made this charger for a friend. It is designed for Renault Zoe 230V charger but holds Nissan version as well. Printed in Prusament PETG Galaxy Black with 30% gyroid infill to hold the cable firm and well. Prints about 24 hours on my Mini…
material switchboard and handle: PETG switchboard foot: Flex Srew Inbus M4X14 8x Screv Inbus M4x10 24x Screv Inbus M4x6 2x Nut M4 34x DIN Rail 150mm 1x cable 5x2.5 2m 230V panel socket 6x Cable grommet M24 1x Leave the Electrical…
Print with TPU and tie a zip around the o4 Antennas if needed.
Case for DC 6-30V 140W Multi Protocol Desktop Intelligent Fast Charging Module
Ten zestaw to perfekcyjne rozwiązanie dla każdego, kto chce stworzyć własną lampę LED G13 (świetlówka LED 230V), idealną do oświetlenia wnętrza samochodu podczas detailingu. Dzięki niemu uzyskasz równomierne, jasne światło, które ułatwi…
Simply box for DP30V5A (+ likewise models) EDIT [15.02.2019] - added back part for complete closure with ventilation holes and one big hole for connector (typically 5,5mm) Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
Compatibility: Joy-it SBC-Buck03 https://joy-it.net/de/products/SBC-Buck03 Riden RD DP30V5A-L https://de.aliexpress.com/item/32639806678.html Additional (Monitor Arm) Tube Mount…
The laser plates for AtomStack does have different dimension. With this adapter it is possible to use the AtomStack M50 laser in the base plate from the AtomStack R30 and AtomStack R30v2 without replacing the laser plate. Printed in PLA…
this is a mockup of the Power Power Supply Modul DP50V5, DP30V5A, DP20V2A for further 3D constructions. it was not designed to be printed!
See https://www.amazon.com/dp/B00YALV0NG/ref=sspa_dk_detail_4
Obudowa pasuje do ściemniacza, regulatora napięcia 230v zakupionego na Aliexpress. Wydruk PLA, 0.2 Quality na MK3. Potrzebne podpory. Obudowa sprawdzona i zamontowana na mojej własnoręcznie wykonanej lampie (patrz zdjęcia). Pasuje tylko…
havent found any watertight 230V socket cover so “fusioned” one myself, its simple model with groove for “O” ring (choose one according your inner socket diameter), ive greased it a bit Need one to feel better while my kid uses water gun…
I have the cheap and very handy DP30V5A power supply, and needed a case for it. I saw some of the other cases here but I wanted a barrel jack for the input and USB and XT60 for the output, so I can connect various other types of…
Průměr zevnitř - 43.6mm Průměr zvenku krytky - 57mm Výška - 30mm Tisknuto pomocí PLA
Front and back parts glued to the bottom. Cover fixed by TEX. Fan 40mm. Created in Solidworks for makers. Feel free to use it or modify.
Lathe spider for PM-1130V / WBL290F Allows to turn smaller diameter materials since it hols them at two different places.
Simply print one or more pieces, screw on place you wish and mount.
Плата преобразователя AC-DC куплена на Aliexpres, плата вторичного преобразователя DC-DC куплена там же, нужно было собрать в один корпус, Так как, надоело проектировать разборные корпуса, решил сделать одноразовый корпус, напечатал слой…
A plug to cover your outlets from collecting dust / dirt .It can be pulled out it is therefore not safe for children
This model is a simple case designed for the DZS Elec 5V-30V Adjustable Delay Internal/External Trigger Relay Board ( https://www.amazon.com/dp/B0721M35KH?psc=1&ref=ppx_yo2ov_dt_b_product_details ) This was designed to use the USB power…
Case for the DP30V5A-L. You have to bend the current shunt wire on the board (gently, with a soft item, I used a piece of folded paper held in pliers. If you get a nick in the wire it will change the resistance. Has a side piece with XT60…
CZ: Je potřeba zohlednit typ použitého materiálnu. Pokud by měl připojený spotřebič příliš vysoký odběr, zásuvka se může zahřívat a pak by nebylo vhodné použití materiálu PLA. V mém případě bude do zásuvky připojena nabíječka na telefon,…
Hi there --> This this is Version 1 At first --> Why I created this Power supply with Master Slave function? () I bought in the last few years some Power supply with Master Slave function, but after 2 year of use it broke. (after…
Temporary cover of the 230V socket mechanism before the final completion of the electrical installation. I use the cover when I already have the machines installed, but I don't want the painter to damage them during the final painting of…
Change the colors on the layer height and that's it.
External socket cover 220/230V + cable cover The cover is designed so that the rain does not interfere and the primary purpose is protection against dog bites. Removable upper parts solve the problem of drawer accessibility and can be…
Support for 230V 32A 7 kW Car In-Line Charger :…
Klapka gniazda CEE pokrywa gniazdo 230V
Hi there --> This this is Version 2 better to wire than V1 At first --> Why I created this Power supply with Master Slave function? () I bought in the last few years some Power supply with Master Slave function, but after 2 year of use it…
This is a 3D printable protective cover designed for CEE combination sockets (red 5-pin 400V industrial connector + standard 230V outlet). The cover serves multiple purposes: Aesthetics : hides the socket and gives a cleaner look for…
links to modules QC4.0 QC3.0 USB Type-C Mobile Phone Quick Charge Adapter 6 -35V Step Down Buck Boost Module for Huawei SCP/FCP Apple PD Qualcomm…
Cover of the saw blade hole went missing. Made a new one. PLA, 50% infill. How I Designed This Just took a picture of the hole. Used it as decal. Then measured the diameter and scaled everything accordingly. I first made a prototy to to…
I made some holders for Audi 30V Valves (2.7 Biturbo, 2.8 and 2.4) and 20V like 1.8T.
Messadapter AC einphasig zur Spannungs- und Strommessung mit einem Multimeter. Zusatzmaterial erforderlich: 3 Stück 4mm Einbaubuchsen, 2 Stück M12x1.5mm Kabelverschraubung, 8x 3mm Schrauben sowie Schuko-Stecker und Kupplung, Mantelleitung…
Oprava chybne vyrobenej trojzásuvky 230V
Shelly GU 10 Spotlight Bulb RGBW 230V For use by trained professionals or electricians only!!! Required components: 1x GU 10 socket (Amazon) 1x Shelly Bulb GU 10 Spotlight RGBW 2x Wago terminals 1x cable with plug Shelly GU 10 Spot Lampe…
Sew-able enclosure for https://www.sparkfun.com/products/102 . Used as a main power switch. The switch itself is embedded below the surface of the enclosure by a small amount, so the switch is difficult to slide without a tool of some…
This is a wall mounted flashlight hanger designed specifically for the Orca Torch D530 and D530V dive flashlights. The flashlight slides into the mount perfectly when printed with PETG. It may worth with other plastics, but I have never…
Zásuvky ovládané přes vypínač s kontrolkou. Materiál: PETG Díry na průchodky jsou vrtány až po sešroubování víka a dna krabičky Vnitřek pospojován fastony 6,3mm a očky d4,5mm Kabel 2,5mm
Remix von diesem Modell von "ManneM": https://www.thingiverse.com/thing:7015589 Motorplatte und Wellenadapter sind unveränderte Kopien (hab sie der Vollständigkeit halber mit hochgeladen) Der Wellenmitnehmer war mir viel zu dünn/fragil…
Mann kann dort einen Platine einlöten mit Leds und nach unten kann man ein Kabel nach unten führen
The Bosch Raumthermostat II 230V is intended for surface mount... however... if your underlying, existing hole is too small you may like this distance holder. There are 2 versions, each consists of 2 pieces: "Part 1 Shadow gap" and "Part…
This is a reconstructed battery lock for a night vision device. The original part broke after the device was accidentally dropped, and since the spare part is not commercially available, I redesigned it for 3D printing. Print orientation:…
Model: Philips 16936/93/16 - Außenleuchte MYGARDEN ACRES 1xE27/20W/230V Cover for modern outdoor wall-mounted lamp. - Trapezoid shape - best printed in PETG (clear or translucent white) --- Abdeckung für moderne Außenwandlampe. -…
This is a Case/Box for “ MINI PD65W Fast Charging Adapter Module DC8-32V 3.25A 65W Step Down Module ” as shown on image. With this module you can charge your device up to 20V and 65W. Printing: I have printed it in PLA and at max…
The threads in the housing are 3/8-inch and are designed for screwing in metal 3/8-inch to standard 1/4-inch adapters. MATERIAL RECOMENDATION: Case: PETG/PP washer locker: TPU HARDWARE NEEDED: 3x 3/8-inch to 1/4-inch adapter 1/4-inch…
I used canopy model from GrabCad and tinkered simple mount for GPS. I used black PETG till layer 86, paused, changed filament to TPU, reduced temperature and printer the upper part with it. Came out nicely. But it can be fully printed…
Zásuvky ovládané přes vypínač s kontrolkou. Materiál: PETG Díry na průchodky jsou vrtány až po sešroubování víka a dna krabičky Vnitřek pospojován fastony 6,3mm a očky d4,5mm Kabel 2,5mm
Front and back parts glued to the bottom. Cover fixed by TEX. Fan 40mm. Created in Solidworks for makers. Feel free to use it or modify.
CZ: Je potřeba zohlednit typ použitého materiálnu. Pokud by měl připojený spotřebič příliš vysoký odběr, zásuvka se může zahřívat a pak by nebylo vhodné použití materiálu PLA. V mém případě bude do zásuvky připojena nabíječka na telefon,…
links to modules QC4.0 QC3.0 USB Type-C Mobile Phone Quick Charge Adapter 6 -35V Step Down Buck Boost Module for Huawei SCP/FCP Apple PD Qualcomm…
Power regulator 30V to 1.2-30V 10A U and I viewer + pot 10k and 1k for more accuracy. Material: https://www.wish.com/c/557eb15c5acb2919d05b44eb?th\_s=1&rel\_p=0&abs\_p=0&original\_q=5%20pairs%20ampli and…
A case for a HF sensor. Use at your own risk, 230V, danger!
covers the connectors of the power supply from those chinese 500W spindles so you don't accidently connect yourself in parallel with your house's 230V circuit ⚡
Housing for cheap 230V to 5V/750mA DC converter. Clip for vertical/horizontal mounting: https://www.thingiverse.com/thing:4931017 Print Settings Printer Brand: Creality Printer: Ender 3 **Resolution:** 0.24 Infill: 15 Category: Electronics
Made for my Sony Action cam AS30V works with Zhiyun SmoothQ gimbal. you need: 1 x M3x12 Hex head cap screw 2 x M3x8 Hex Socket Cap Head Screw Bolts 13 x M6 Hex nuts
Print Settings: Material: PET-G Layer height: 0.25mm Infill: 20-30% (recommended) Supports: Not required Assembly & Mounting: Parts joined with: M3x24mm screws Wall mounting: Countersunk screws 3.5x20mm Features: Custom-designed for…
An alternative for Vision TC3 PWREU or TC2 PWREU made by company visionaudiovisual.com. I designed replacement part using ABB Levit socket, original part is made with SCHUKO socket, which is not allowed to be used in my country. Anyway,…
Výměna starých zásuvek 230V za nové hranaté Kopos v prodlužovacím bubnu.
PETG (Temu) Rychlost tisku 60% Teplota trysky 250°C Průtok 80°C Výplň 40% Kolébkový přepínač RS-2101-3C, 2xOn-Off, L408 Zásuvka 230V/16A na panel L163
This device consists of 2 main component types. First is the fastener for the converter and it should be printed from PETG and glued together. It has to be done like that in order to maximize the sturdiness and limit the possibility of…
Původní model se mi hodí do koupelny na akci “schovej díru aneb recyklace děr v koupelně” a jak už z název akce napovídá, bylo potřeba udělat dírku. Protože potřebuju schovat jednu díru, je potřeba použít malinký kousek oboustranky, aby…
Pour les prise equipés d'usb, double face sur plan de travail ou autres.
Housing for the gate controller Yunshan 7-30V 10A Relay Board
Needed this part for work, couldn't find it online so decided to make it my self. Hope you all find it useful. Print Settings Supports: No Filament: any ABS any Category: Other
I came across this relay while looking for alternatives to the broadly available relays that look a bit too sketchy to put 230V AC through them: https://www.amazon.de/dp/B07WGKQ68Q This is a bracket to mount them to a DIN rail.
