Wyniki wyszukiwania: 320

Airbus A320 NEO

A really classic aircraft. After modeling the 737-800, I decided to model its rival, the A320 NEO. Both are to scale, same as my MD-11 and 747-100. Scale is 1:400

Airbus A320 Engine

I 3D desingned this model to be print with commun paramethers, it doesnt require horizontal expansion. It just need supports in certain parts. The mechanism require 4 bearings of 32mm (there are 3D bearings models that you can print, so…

P320 M18 Blue Gun/Red Gun/Training Gun

P320 FCU (airsoft)

100% Accurate Frame Model (for airsoft)

Airbus A320 Plane STL (high quality)

This is a detailed model of the airbus a320-200. I have made this model in blender so it may lose some detail when you are actually printing it. I hope you find this model useful as there seem to be no other free realistic aircraft models…

URAL 4320 32 Scale

Introduction: This is a 3D printable scale model of URAL 4320 , a heavy duty off-road capable truck designed by URAL for military and civilian operations. The model is designed in 1:32 scale for FDM 3D printing, which offers clean lines,…

M3201 Ender-3/CR-10 [Micro Swiss NG Extruder] - Fan Shroud and Probe Brackets

Compatible with: Extruder : SKU M3201 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers SKU M3203 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Linear Rail Edition) Hotend:…

Airbus A320 - Home Cockpit Knobs

Models of Airbus A320 Knobs for Home Cockpit build. Files with knobs for: Ecam Efis Knob 1 - with 3mm and 6mm hole Efis Knob 2 - with 3mm and 6mm hole Engine Master 1 Engine Master 2 FCU Knob 1 FCU Knob 2 FCU Knob 3 FCU Knob 4 Flaps Lower…

Airbus A320 Korry style switch for 3mm panels

Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…

Airbus A320 Switching Knob - V2

Dimensionally accurate three-part design that can be printed and used without painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any colour…

Lego Compatible (32062.dat) Technic Axle 2 Notched

This model is compatible with the lego system.

Airbus A320 Lighting Knob - V2

Dimensionally accurate three-part design that can be printed and used without any painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any…

Airbus A320 MCDU

Dimensionally accurate MCDU with models for all buttons and lenses. Designed in 3 layers, with top layer 3D printed and middle and bottom layers either 3D printed, or CNC machined from 3mm acrylic. Designed to be screwed or glued together…

Airbus (A320) labels for switch

New version of labels V2 https://www.printables.com/model/1364062-labels-for-korry-switch-a320-v2 Designed for A320 Korry switch https://www.printables.com/cs/model/103018-airbus-a320-korry-switch

Lego Compatible (32000.dat) Technic Brick 1 x 2 with Holes

This model is compatible with the lego system.

Airbus A320 EFIS Knob - V2

An EFIS knob designed for 6mm shaft rotary switch. Marker line can be backlit if lightguide is printed in transparent or opaque material. Retained on shaft with 3mm grub screw Switch body printed in matte grey PLA. Lightguide printed in…

Airbus A320 Flaps Mechanism

Design to recreate the stepped and gated functionality of the Airbus A320 Flaps lever. Design objective was to create a realistic feel, with a smooth, solid and weighty action. The design therefore includes steel and brass shafts plus an…

a320 Overheadpanel

a320 Overheadpanel (Not completed).

Lego Compatible (3320.dat) Minifig Headgear Mask Batman Cowl with Molded Eyes Pattern

This model is compatible with the lego system.

Airbus A320 FCU Panel

Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…

Lego Compatible (32064.dat) Technic Brick 1 x 2 with Axlehole with Open Sides and Stud Blocker

This model is compatible with the lego system.

AIRBUS A320 Airplane Pop Flat Card

AIRBUS A320 Airplane Pop Flat Card

M3202 Ender-5 / 5 Pro / 5 Plus [Micro Swiss NG Extruder] - Fan Shrouds and Brackets

Compatible with: Extruder: M3202 - Micro Swiss NG™ Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus Printers M3204 - Micro Swiss NG™ Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus Printers (Linear Rail Edition)…

Airbus A320 FCU Heading Knob

Dimensionally accurate design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it feels…

Airbus A320 Radio Management Panel Frequency Selector Knobs

Models for the upper and lower Frequency selector Knobs on the Airbus A320 RMP. Knobs are both in two parts to allow printing with top face upwards to achieve best visible finish. Printed in matte grey PLA, 100% infill. Knobs are a push…

Airbus A320 Transponder Panel

Three layer panel plus rotary switch mounting plate. Panels designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm…

Lego Compatible (32061.dat) Technic Engine Cylinder Head

This model is compatible with the lego system.

Airbus A320 EFIS Korry style Switch

Korry style switch for the 7 buttons on A320 EFIS panel. 3D printed parts are Button Light Guide and Button Housing. Both printed in Black PLA, 100% infill, 0.15 layer height. Button Top Indicator and Bottom Legend are CNC machined from…

Airbus A320 FCU Speed Knob

Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…

Sig Sauer M17 (P320)

Airbus A320 Parking Brake Handle

Dimensionally accurate three-part design that can be printed without any painting or post processing. Designed to be fitted to 6mm shaft. Main body printed in matte black PLA Arrow infill printed in white PLA Label insert printed in matte…

A320 Plane Base

Noice plane base (WIP A320)

Airbus A320 FCU ALT Knob

Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…

Airbus A320 standalone tiller DIY

This project is still in development. Final version may be finished in few months. If anyone instested to print it and build it before in test version or modify files for personal use - you can use Fusion and modify internal parts as…

Korry Switch A320 – V2

Korry Switch A320 – V2 This is the second version of my Korry switch model for the Airbus A320 , designed with better printability, improved accuracy, and easier assembly in mind. It’s ideal for home cockpit builders, flight sim…

Lego Compatible (32009.dat) Technic Beam 3 x 3.8 x 7 Liftarm Bent 45 Double

This model is compatible with the lego system.

Airbus A320 EFIS Baro Knob

Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…

Conversion Kit for Airsoft VFC SIG Sauer P320 M17

This model is for the airsoft version of the SIG Sauer P320 M17 from VFC. It's not for a real gun. Part you need to print: Body 1x Right side 1x Left side 1x Trigger 1x Endcap front (v1 or v2 ) 1x Endcap back ( v1 or v2) 1x Mag release…

Airbus A320 EFIS Panels

Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…

Airbus A320 Parking Brake Lift and Turn Mechanism

Set of 6 parts to create lift and turn movement for Airbus Parking Brake Handle. Works with 90 degree Cam Switch 20A 1 Pole ON/OFF 90, which is pictured and can be found online Designed to work with my PARK BRK handle model:…

Magcubic HY320 Simple Cover

A simple cover for the projector Magcubic HY320. The cover is made in such a way that it is possible to stick soft material on the sides from the inside. Supports: yes.

Airbus A320 FCU Vertical Speed Knob

Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…

Airbus A320 Radio Panel (RMP)

ATTENTION. THIS IS AN OLD AND BAD VERSION!!!!!! YOU CAN FIND THE NEW V2 HERE: https://www.printables.com/model/1727793-airbus-a320-radio-managment-panel-rmp !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Update 2025-08/05 -…

Switch heads for the A320 Light Panel

These are the three different switch heads of the A320 light panel and the black ring that goes at the bottom. Enjoy!

Airbus A320 slingshot glider (Only need 1 elastic band!)

Hello! This Glider has been based off one the worlds most sold aircraft since 1986, the Airbus A320 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane…

Airbus A320 FCU Push Pull mechanism

Design to recreate the Push Pull functionality needed for the ALT, Heading, Speed and Vertical Speed controls on the Airbus FCU. Design objective was to create a realistic feel, with a smooth, solid and weighty action. Push and Pull…

A320 / A330 131VU panel

A320/A330 131VU panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Important Note: While this panel can…

Lego Compatible (32017.dat) Technic Beam 5 x 0.5

This model is compatible with the lego system.

P320 Flat Trigger

100% Accurate Model for airsoft

Airbus A320 Flaps Handle

Dimensionally accurate design for mounting on flaps lever shaft. Design needs support when printing, or splitting into two parts and then gluing. Printed in PLA with 100% infill. Variable layer height can be used on upper knob to reduce…

Airbus A320 Overhead Light Panel (25 VU)

These are the DFX and STL files from the DIY Airbus Light Panel. I used a laser to cut the Panels and a 2.5 mm plate. I also uploaded the LightBurn project to edit and customize it on Thingiverse (https://www.thingiverse.com/thing:6789303).

2,8 TFT SPI 240x320 V1.2 (3d Modell)

2,8 TFT SPI 240x320 V1.2

TempTower Easy and fast to print (0.4mm Nozzle) 190°C up to 320°C

Here are some Temp Towers which you can easy use in the range which is needed in your case. You can coose a Temp Tower which is suitable for you. Each Temp Tower has a spread of 30°C which should be enough to calibrate your filament. The…

Airbus A320 Transponder Selector Knob

Dimensionally accurate two-part design that can be printed and used without any painting or post processing. Main switch body printed in matte grey PLA, though can be printed in any colour and painted Marker line printed in white PLA or…

3 Pin Male Plug IEC320 C14 Chassis Panel Power Inlet Socket Connector

3 Pin Male Plug IEC320 C14 Chassis Panel Power Inlet Socket Connector I designed this thing in order to have the most detailed 3d Model of my CNC electronics enclosure. It is fairly accurate and should do for future CAD models that need a…

Airbus A320 Flaps Panels

Reasonably dimensionally accurate flaps panel, designed to fit Skalarki size Pedestal. Panel size 148.5mm x 100mm. Solves the problem, how to engrave position legend on curved surface. 3 layer panel designed to be routed from 3mm cast…

Airbus A320 Korry style switch for Skalarki Overhead panels

Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…

Airbus A320 Pedestal Foot Rests

I suspect they are rubber in the real aeroplane, but you're probably not going to actually put your feet on them. Printed in matte grey PLA. I used 50% infill to give them a feeling of solidity, but could be as low as 10% to save…

p320 armorers block mup-1

armorers block to assist in building the mup-1

Triple Shelf with Honeycomb Storage Wall Sides 320mmW x 150mmD

A remix of my Double Shelf with HSW Sides 200mm in a larger size with an added middle shelf. 320mmW x 150mmD x 316mmH.

Lego Compatible (32039.dat) Technic Connector (Axle/Bush) Type 1

This model is compatible with the lego system.

Wall mount for Bosch ebike Battery Charger 2A BPC3200

Compact wall mount for Bosch ebike battery charger 2A BPC3200 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer guidance.

Ext. Gear Airbus A320

This is my Gear Ext. Projekt for my Airbus A320 Cockpit Category: 3D Printer Parts

Labels for Korry Switch A320 - V2

🔧 Important: To achieve crisp, readable lettering, a 0.25 mm nozzle is required . Larger nozzles (like 0.4 mm) will not render the fine details of the raised text properly. 🧩 Two printing methods: Requires 0.25 mm nozzle for best results.…

Airbus A320 Rudder Trim Knob - V2

Three part design that can be printed and used without any painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any colour and painted Light…

Airbus 320-200 CEO

If you like my models or would like a specific model made please consider donating. 1:200 Desk Model of the Airbus 320-200 CEO. The .3MF file contains the parts for the print.

Philips 2200 - 3200 2cm extra

Make of bean holder for Philips printables does not allow non-commercial license org model thing:5401987

IEC320 C14 POWER SOCKET WITH FUSE HOLDER AND SWITCH

This is a 3D model of the IEC320 C14 Power Socket that comes with a Fuse Holder and a Switch for IEC C13 Power Cable connection. It's designed in Fusion 360, .f3d files are included. I tried to make the dimensions as close to real one as…

Dodge Scat Pack Angry Bee 1320 Logo

This was a pain to make, mainly because Fusion 360 ran so slow while I was designing this one along with some other issues i ran into, but I made it through and I think it was worth it! Anyways there are two models here. One is without…

Lego Compatible (32054.dat) Technic Pin Long with Stop Bush

This model is compatible with the lego system.

yoRadio case for IPS 4.0 Inch, ILI9488, TFT LCD 480*320

yoRadio box. More information https://github.com/VaraiTamas/yoRadio.git

P320 FCU Bending Kit (WORK IN PROGRESS)

P320 FCU Bending Kit (Work in progress) Machine: Klutch 3-1 Manual Brake Press This project is under construction and as I keep tweaking and testing, this will be my landing zone for uploading files and keeping the most current, tried and…

Airbus A320 Audio Control Panel Reception Knob

Model for the 15 Reception audio level control knobs on the Airbus A320 ACP. Not a perfect replica as the real knobs are illuminated when released out and have a collar that fits into the panel, but for me, close enough. Printed in matte…

1U Rack server Vertical stand (Dell R320)

A vertical stand for Dell R320. Print two of these. Also fits any other 1U rack mountable thingy with a 43mm side profile.

Airbus A320 ECAM Control Panel Korry Style switch

Korry style switch used on ECAM Control Panel in Pedestal. Designed to look similar to a real switch, with focus on a smooth click movement and even illumination, with no light bleed between top and bottom indicators. Tolerance between…

Airbus A320 Transponder Mode Knob

Dimensionally accurate two-part design that can be printed and used without any painting or post processing. Main switch body printed in matte grey PLA, though can be printed in any colour and painted Marker line printed in white PLA or…

320x320 bed texture for PrusaSlicer

A basic bed texture to use with my voron printer (due to some mods, my effective print volume has been reduced to to 320x320). The grid has thick lines every 50mm and thin ones every 10mm.

Airbus A320 Cockpit Microphone

Realistic model of Airbus A320 cockpit Microphone which mounts at rear of sidestick console. Print all body and mesh parts in black PLA, 100% infill for strength and solid feel. Model is split into parts so it can be printed without…

JBL Partybox 320 Microphone Holder - JBL Partybox 320 Mikrofon Halterung

I recommend printing it in PETG The first version closes relatively flat at the top (e.g. if the party box is to be pushed under a table), the second version “mic higher” places the microphones higher. It would be nice if you post your…

Korry Switch Guard Airbus 320

For the axle, I used a 1 mm thick wire, and you also need a small spring. It's for a self-made A320 overhead panel.

Airbus A320 Switching Panel

Three layer panel and rotary switch holder. Panels designed to be CNC or laser cut from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear.…

Airbus A320 FCU Korry style Switch

Korry style switch for the Autopilot and Auto Throttle buttons on A320 FCU panel. 3D printed parts are Button Light Guide and Button Housing. Both printed in Black PLA, 100% infill, 0.15 layer height. An alternative Housing design in two…

A320 Gravity Gear Extension Panel - V1

This is my model of the Airbus A320 Gravity Gear Extension Panel for my future homecockpit! VISIT MY COLLECTION “A320 COCKPIT” FOR ALL CURRENTLY AVAILABLE MODELS! The goal is to make an accurate replica, so if you have any specific data…

Gigabyte GA-A320M-S2H IO shield

Print model IO shield for Gigabyte GA-B320M-S2H

Airbus A320 Rudder Pedals

My latest updated version with improvements can be downloaded from MakerWorld: https://makerworld.com/en/models/1714786-a320-rudder-pedals#profileId-1819932 Reasonably dimensionally accurate Airbus 320 style Rudder Pedals that clamp onto…

Lego Compatible (32056.dat) Technic Beam 3 x 3 x 0.5 Liftarm Bent 90

This model is compatible with the lego system.

Airbus A320 Sidestick Mount - Captain's side

A strong and stable mount for a Thrustmaster HOTAS magnetic base combined with FlightSimProjects Airbus sidestick and gaiter. Designed to be mounted in a side cabinet with a 12mm MDF or similar top panel. Hole size required is 168mm x…

Airbus A320 Rudder Trim Mechanism - V2

Mechanism to create realistic 30 degree sprung movement for rudder trim knob. Works with pair of microswitches. Designed to work with my Rudder Trim Knob: Airbus A320 Rudder Trim Knob by MANTOGA | Download free STL model | Printables.com…

A320 MIP Lighting Panel ND Brightness Knob

Reasonably dimensionally accurate concentric brightness knobs. To be honest, this design pushes the limits for a 0.4mm nozzle and would ideally be printed with a 0.2mm, but as the pictues show you can just about get away with 0.4mm. The…

Housing Display TFT ILI9341 320X240 (ESP32 /ESP8266)

Gehäuse für ein ILI9341 TFT 320X240 Display Das Gehäusedeckel wird nur aufgesteckt. Das Display wird unter der Kappe mit 4Stück M3 X max.10mm Schrauben festgehalten. Das Gehäuse bietet genügend Platz um darin einen ECP32 oder D1-Mini etc.…

Airbus A320 Cockpit Microphone Holder - Captain's side

Realistic recreation of the Microphone holder at the rear of A320 Sidestick Cabinet. Designed for cabinet with 5 degree slope, but would work if top was flat. Print in black PLA, 100% infill for strength. Both a complete model and a…

support vidéoprojecteur HY320 Android

support vidéoprojecteur HY320 Android plafond et mur

A320 MIP Frame Captain Side Panel

This is a NexGenSim 3D printable A320 MIP Frame Captain Side Panel. It is provided free of charge for you to 3D print it yourself. It is a highly accurate representation of the real A320 ceo panel, scale 1:1

A320 / A330 ATC MSG panel

A320/A330 ATC MSG panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Can be connected to 131VU panel which can…

A320 Metal Extrusion Pedestal

NOTE: This is not a build instruction or ready made files. This is simply some tips and helpful resources if you plan on buliding a pedestal. You will enocunter problems and you will have to solve them yourself, definitvely not a beginner…

M3206 CR-10 V2 / V3 [Micro Swiss NG Extruder] Fan Shroud

Compatible with: Extruder : SKU M3206 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 V2 / V3 Hotend: Micro Swiss All Metal Hotend Hotend Fan: 4010 Part Cooling Fan: 5015 Blower Probe: (The NG Extruder does not interfere with…

Airbus A320 FCU Panel [Multi-Colored Version]

Update 2025-08/05 - Added my Mobiflight preset and a section in the end explaining it + some pictures. Note : I have included the f3d file I used to add the text but since it got corrupted at the end and I had to recover an older version…

A320 Overhead Panel - Lights, APU & More

Print-Friendly Design: ✅ Standard FDM printers – no MMU required 🧩 Panel is split into two parts to fit printers like Prusa MK3/MK4 or Bambu Lab 🪛 Parts are designed for easy alignment and assembly using printed alignment pins ✅ MMU -…

Screwless Caddy for DELL PowerEdge R310, R320, R410, R415, R510, R515, R610, R710, T610, T710

A screwless caddy for DELL PowerEdge R310, R320, R410, R415, R510, R515, R610, R710, T610, T710. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: eSUN PLA Notes: Customs…

IEC320 C14 Receptacle Dust Cap

A dust cover for an IEC320 C14 Receptacle. Even though the friction fit is good, a cutout has been added to keep the cover attached, using a string or similar, when not in use. Print instructions Material: PLA Supports: No Layer Height:…