175 modeli
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
If you want a smaller on look at the original: https://www.printables.com/de/model/549833-euro-can-dispenser
Simple Skoda Octavia 1 cupholder for 2 500ml cans. Doporučuji ze spod přilepit pomocí tavné pistole nebo siloconu.
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
FOR THE HORDE! Can Holder 500ml
ACHTUNG: HIER IST DIE NEUE v2.3 VERSION: LINK Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke…
The Original has the issue that you had to sand the connections to fit. Also, the connections was to thin so that the constructions start to collapse if the rack was to full. I changed the tolerances for a better fit, and modified the…
Like this model? check out the smaller version: https://www.printables.com/model/1366342-two-in-one-can-holder-for-250ml-and-150ml-cans 🛠 How Does It Work? This 3D-printed can holder features a clever sliding mechanism with a built-in…
🥤 Soda Can Dispenser Deluxe – Sleek, Stylish, and Functional! Upgrade your beverage organization with the Soda Can Dispenser Deluxe! Designed in an eye-catching Voronoi-style , this dispenser holds a six-pack of 330ml or 500ml cans…
These extended front parts allow the can dispenser to work with 500ml Ø66mm cans. First upload was too wide. Removed 1cm. The parts should still (barely) fit on a prusa mini, and the 3mf file has all the modified front parts with infill…
Holder for standard 500ml (67mm diameter) European cans. Printing about 7h on A1, 300g PLA at 15% fill, support only under handle. https://www.youtube.com/shorts/VcPHv7hgoV0
A dryer stand for 500ml soft flask bottles from a Salomon running vest. Remix of Rainer Stropek's design.
There are 150mm and 200mm height options. Optional drip tray.
This model is used to hold a 500 ml can on bicycle bottle cages.
Can dispenser designed for 500ml cans (diameter 66mm, length 169mm). Other dispensers I tried didn't hold cans well enough while traveling downwards. Dispenser has been designed to fit 350mm depth shelves (tested on Bosch fridge) Print…
Designed that long time ago and tbh too lazy to go a photograph the printed product but for me it works with the fat stem beach umbrellas. Standard 0.4 nozzle mine is of ASA After several times being used still holds.
print on the side 3 perimeter, 15 infill 19g petg Made to fit 500ml can Added 3rd hole
Nested and keyed Beverage Can Dispenser for standard 500ml cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it to stay together…
Nested and keyed Beverage Can Dispenser for standard 500ml cans. There are versions that hold six (6) or five (5) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
Just 999henry's can holder stretched a little in the Z axis so it will hold 500ml cans better.
a smal Plant watering funnel for potted plants with a capacity of roughly 500ml.
No more scrunching up that resin filter so it fits in the bottle and playing the waiting game as it filters resin that could have little support pieces in it. These funnels will screw onto any 3DJake 500ml or 1000ml resin bottle, fits…
This wall mount bottle holder suits bottles that are 65mm in diameter and takes a 60-65mm LED plate at the bottom of the holder to make the content of the bottle shine :D Two versions closed and open upper support ring. This is a made on…
Original description Simple Skoda Octavia 1 cupholder for 2 500ml cans. Doporučuji ze spod přilepit pomocí tavné pistole nebo siliconu. My desc Originally, I made this edit for my friend, but many of you asked for it and where you could…
“Years ago" Inspired by all kind of clever solutions at the time, I designed a dispenser for 330ml cans which printed in only 4 pieces on my BIG 3D printer (~450mm x 450mm x450mm) which rests in piece ;-( Luckily the local brewery decided…
Made a quick remix in meshmixer using the stl. This will fit 500ml can as the given 500ml can clip didn't fit the cans from where im from (i believe it is for 1pint cans). Has a brim at the small part for better adhesion.
It's just a beer can clip for your bicycle
This is a tray for use with the 500ml Salomon Soft Flask Bottle Dryer Rack you can download here: https://www.printables.com/model/938523-500ml-salomon-soft-flask-bottle-dryer-rack The model includes a tray and an insert which provides a…
Various sizes. Easy to print. Preferably in PETG. Have fun with it.
material PLA can 200ml: https://www.printables.com/cs/model/586086-cap-for-the-can-200ml-d-515mm
Vaso chop de 500ml liso para poder poner tus logos y perzonalisarlos Sin soportes 0.2 altura de capa
This beer / can dispenser for 500ml cans was made for festivals and outdoor events . Therefore it should not be to unstable and could be carried without falling apart. Therefore it is printed in several parts to ensure stability by the…
Convert your 16oz Yeti can cooler to fit 500ml cans.
Dosenkühler für 500ml Getränkedosen, Hält an heißen Sommertagen die Getränke kühl.
Print the Lid without supports, no extra build plate adhesion is required, a skirt or none will do. This model is to be printed with harder filaments, not FLEX due to the exact measurements for the PLA bend factor. FLEX will not grip the…
Scaled up to fit the north american 500mL monster energy cans. I have various sizes available for purchase on mym cults3D if you want other can sizes. V cheap, just a little extra scrap to help me invest in housing.…
Endlich keine Fliegen oder Ähnliches mehr in Ihrer Dose. Mit dem stylischen Aufsatzdeckel ist Ihr Getränk sicher Finally, no more flies or the like in your can. Your drink is safe with the stylish top lid
I designed this to make it easy and convenient to always have some water close by. I looked at other downloadable clips, and most either required a strap, carabiner/D-loop, or something similar to clip onto a belt loop. I often find that…
Use this connector-piece to make the can dispenser compatible with 500ml cans. The rest of the pieces you can download here: https://www.printables.com/model/1209009-12oz-or-16oz-can-dispenser-20
This is a 3D printed reusable cap designed to fit standard 500ml aluminum soda or beer cans. After opening a can, this cap lets you reseal it to keep the drink fresh in the fridge and prevent spills. ✅ Fits most 500ml aluminum cans…
Quick remix of the Segan Designs can adapter to fit 500ml / 16.9oz cans. Fits the gen2 12oz Colsters with quarter turn threads.
I needed a quick way to turn a standard 500ml water bottle, into a sport bottle, where I could quickly change out the cap, as the water bottles were used. We had a sporting event where we needed to share the water, and needed a way to…
It's a simple design but it works - it fits very good. Print with TPU, slow speed, infill 15%. If you want, you can also print the lid downscaled to 99% (all axes) to make it more tight - it's 0,6mm less in diameter = 0,3mm radius / each…
Der Deckel rastet auf einer 330ml/500ml Dose am Rand ein. Dadurch können Fremdkörper nicht in die Dose gelangen (z.B. Bienen, Wespen etc.) Es handelt sich bei dem Modell um ein sogenanntes Print In Place, d.h. das Modell besteht aus einm…
Der Deckel rastet auf einer 330ml oder 500ml Dose am Rand ein. Dadurch können Fremdkörper nicht in die Dose gelangen (z.B. Bienen, Wespen etc.) Es handelt sich bei dem Modell um ein sogenanntes Print In Place, d.h. das Modell besteht aus…
Remix of "V2 Beverage Can Dispenser" for Monster cans (500ml)
After many months of trying out different can handles and adapting them to fit 500mL cans i noticed they all have a common flaw. You can only grab them from one side. After the struggles of wanting to grab my beer with my left hand from…
I noticed that I was getting bugs flying into my drinks when I walked away. So, I decided to design this cover. I am aware that there are others out there, but I wanted to see if I could do it and get it to fit. I’m not the most confident…
Adapter for 474ml (US 16 oz / US Pint) Yeti Colster to enable it to hold a 500ml (US 16.8 oz) can. Can also be used as a drink identifier.
Nested and keyed Beverage Can Dispenser for standard 500ml cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it to stay together…
This we designed to prevent clogging and allow maximum airflow so there no more waiting for your resin to drain. The ribs in the funnel will prevent the resin soaked screen from laminating to the funnel wall and the funnel angle make sure…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
Beschreibung Passend für 15 Bier Dosen 500ml / 0,5L => Schichthöhe 0,28 => Support auf Druckplatte => Infill: 20% => PETG oder PLA Teile Liste: KG Rohr DN 200 Länge: 1m 1x 1m Gewindestange M10 10x Mutter M10 5x Unterlegscheiben Außen…
Dies ist eine verbesserte Version 2: Deckel lässt sich weiter öffnen Deckel wurde verstärkt an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder…
Dies ist eine verbesserte Version 2: Deckel lässt sich weiter öffnen Deckel wurde verstärkt an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder…
I grew tired of expensive water bottles that would get stopped up or drip everywhere. After looking at a dog bowl that used a 2L bottle, I thought I could do the same for our hamster. This two piece water bottle will mount on a wire frame…
This is a printable 500ml bottle or flask. Please check out the video to know what you are getting. It works but there are some caveats. Video at... https://youtu.be/s2qBuGyuLSg More details are available at... https://logicalplanet.com/…
belt can holder for 330ml and 500ml cans. 3 types of belt connections(open, semi-open, closed) and different files for ASA/Nylon or PETG print with 0,40mm nozzle 3 walls/25% infill or 0,6mm nozzle 2 walls/25% infill slide in the top part…
Citroen Berlingo push in cup holder to suit 300ml and 500ml cans etc, also fits partner van
I needed a holder to help transport my Kimble 500ml media bottles. I assume it will also fit other media bottle brands so long as they are around 86mm. Holders will tightly interlock together to provide stability. Included the .step file…
print without infill and supports
Circular Bottle Holder designed to fit Tershine brand bottles and other car care products with slim 500ml bottles. created by request I have no use of it myself so no test print have been made. Please give me feedback and suggestions on…
Works with 500ml cans in slovakia, don't know about other countries.
Came out nicely for me when printed with a 0.8mm nozzle w/ 0.4mm layer height.
Voici un support mural pour égoutter vos flask Salomon !
UPDATED JUNE 20: Added Revision 2... *This revision has not been printed or tested yet. Use at your own risk. Slight redesign to improve strength of the syringe holder, (At the cost of more material, obviously), as well as a concept for a…
Dies ist eine verbesserte Version 2: Deckel lässt sich weiter öffnen Deckel wurde verstärkt an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder…
As with all print-in-place models, your printer needs to be calibrated quite well. In addition, it needs to be able to reliably bridge a 17.23mm gap. FreeCAD source file and .step file included.
Simple print No supports infill 15%
This is a simple can crusher for 16oz/500ml soda cans. I printed in PLA. There are two sets of models to choose from, The non-combined version prints the Piston and Piston Cap separate along with the cylinder and cylinder bottom. OR you…
Verschluß für eine 330ml oder 500ml Dose mit Jack Daniels
Verschluß für eine 330ml oder 500ml Dose mit Rammstein
Verschluß für eine 330ml oder 500ml Dose mit FC Bayern München Logo
Dies ist eine verbesserte Version 2: Deckel lässt ich um 180° öffnen an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder 500ml Dose am Rand ein.…
Once strapped to the Kat walk its not as easy to grab for some stuff around, as you place it somewhere where you wont hit stuff while in action, so how about hydration?! While in game you can get lost in time easily and sweat a lot so its…
Verschluß für eine 330ml oder 500ml Dose mit Motocross Spruch
Dies ist eine verbesserte Version 2.3: Deckel lässt ich um 180° öffnen an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt leichtes Anbringen und Abnehmen - easy on / off weniger Material…
Der Deckel rastet auf einer 330ml/500ml Dose am Rand ein. Dadurch können Fremdkörper nicht in die Dose gelangen (z.B. Bienen, Wespen etc.) Es handelt sich bei dem Modell um ein sogenanntes Print In Place, d.h. das Modell besteht aus einm…
Dies ist eine verbesserte Version 2: Deckel lässt sich weiter öffnen Deckel wurde verstärkt an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder…
Verschluß für eine 330ml oder 500ml Dose mit Happy Camper Camper Wohnmobil
Dies ist eine verbesserte Version 2: Deckel lässt sich weiter öffnen Deckel wurde verstärkt an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder…
A simple holder specifically designed for the Chilly's brand 500ml insulated water/drinks bottles . The inside diameter of the holder is 71mm and the max height is 120mm so it probably works for a variety of bottles. It comes in two…
Very easy to print
Verschluß für eine 330ml oder 500ml Dose mit Opel Blitz und Schrift
The lid is for protecting the Guinness from flies and wasps. The inner diameter is ca. 0,1-0,2mm less than the edge of the glass, so it fits very smooth, the click is hardly noticeable. I wanted this so "light", to protect the thin glass…
Haben Sie es aus satt, ihre Getränkedose umständlich zu halten, ihr Kühles Getränk durch ihre Körperwäre aufzuwärmen? bekommen sie schnell kalte Finger? Dan hilft ihnen der Dosenhalter im Design einer Pistolenhülse. Nicht mehr umständlich…
These are one of the same size of pedestal but its base is not only round but can be a polygon base from a triangle to a decagon! Adhesion: No Support: No Material: PLA Infill: 10%, Concentric Resolution: 0.15mm Time: Triangle Base: 56min…
A light shield for a Corning 500mL EasyGrip bottle. The cap position allows easy one-handed operation. Print in black with at least 3 perimeters for good shielding.
A mount for the 500 ml version of the WD-40 spray cans, with a room for the straw. The inner diameter is 67mm, the distance between the mountig holes is 40mm and fits M2 screws, so perfect for Skadis T-nuts. There is a long and short…
Servus, mir hat nicht gefallen wie die Dosen im Halter wackeln deshalb habe ich diese zwei Passhülsen gemacht. Es handelt sich nur um die Passhülsen nicht um den Getränkehalter. Hi, I didn't like how the cans wobbled in the holder, so I…
A 2x2x4U Gridfinity holder for a Würth 500ml Spraybottle.
Accueil parfaitement les canettes Monster energy. vide comme pleine imprimé en Pla+ , buse de 0.4 , couches de 0.25mm , 3 murs , remplissage gyroide 10% , 14 mètre de filament .
A 15ml scoop for mixing oil into gasoline at 3% for 2-stroke combustion engines. Use one scoop per half liter (500ml) of gasoline. Doesn't require any supports for printing.
Dies ist eine verbesserte Version 2.3: Deckel lässt ich um 180° öffnen an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt leichtes Anbringen und Abnehmen - easy on / off weniger Material…
Dies ist eine verbesserte Version 2.3: Deckel lässt ich um 180° öffnen an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt leichtes Anbringen und Abnehmen - easy on / off weniger Material…
A light shield for a STEMCELL 500mL bottle (mTeSR 1 Basal Medium & others). The cap position allows easy one-handed operation. Print in black with at least 3 perimeters for good shielding.
If you have multiple Yeti Colsters that are all the same colour, you can use the 500ml adapter as a colour band / drink indicator. In that case you can use this shim to drink a normal 473ml can, or combine it with the 355ml Short Can…
