43 modeli
This is a replacement part for the film door latch of the Canon EOS 50/50e. It is modelled after the original part that broke (view images). I printed it in PLA. Might need some sanding afterwards because it is a very thin part and can…
Es gibt auch eine STL Datei OHNE den Namen “Sabine”. Ausserdem habe ich mehrer Zahlen hinzugefügt. my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.8 Resolution: 0.3 - 0.4 Walls: 2 Infill: 10% Material: Brand: Eono, Giantarm,…
Had an old 17" HP dv7 (my first PC) in working condition but with a broken keyboard and dead battery, and three 2.5" HDD from family members' laptops I upgraded to SSDs. Since the parts had been sitting in a drawer for years, I decided to…
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
The tab for opening the back cover where the film roll is stored got broken on this Canon EOS 50E. I took it apart to see what was the issue and when I saw the part that needed fixing, I knew I had found a candidate for testing my CAD…
Hier gibt es einen Einsatz der genau in den SQ14 Rahmen von einer Janome MC550E und kombatiblen Modellen von zum Beispiel Elna passt. Der Stoff wird mit einer Klemmplatte gehalten und nicht überdehnt. In Ober und Unterplatte sind Magnete…
Das ist ein Saugstutzen für den Exzenterschleifer RO150E von Festool.
Inspiriert durch https://www.thingiverse.com/thing:4676653 , habe den Halter neu konstruiert. Arretiert wird er durch den Euro-Stecker. Beispiel: https://www.amazon.de/gp/product/B0013NAPKI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1…
Ihr könnt das 50er-Schild in der ersten Schicht bis z.B. 2,2 mm Höhe in weiß drucken. Danach wechselt ihr auf rot bis 3,4 mm. Als letztes verwendet ihr schwarz bis zur Gesamthöhe von 4 mm.
Short Duct for the EGO Power Blower LB7650E that is EGO nozzle compatible. Designed to make the blower easier to use when using on a vehicle. It uses M3 nut and bolt to secure the duct to the power tool's existing latching bump. The nut…
This is a functioning watchmaker's faceplate. It allows to precisely fix irregularly shaped parts to process them in a lathe. This one has M16 thread on the faceplate and fits Proxxon 150E lathe. I'm sure adaptations can be made to fit it…
I Printed it in pla using a 0.4mm nozzle without any support.
30% infill. No sticky tape needed ;)
These gauges for Proxxon 150E allow to move the axes with 1/100mm increments instead of the default 5/100mm. The gauges come with a set of adapters that can be easily installed to compensate for the bigger size of the gauges. Note that…
After seeing the announcement for the new Prusa Enclosure I was very interested in it's features. Especially the fire suppression system was something I wished for my IKEA LACK enclosure. So I found a source to buy the BlazeCut T050E Fire…
Printed with 0,2mm Nozzle PETG
Das Modell einer „Fliegenden Untertasse“ wurde vermeintlichen Fotos aus den 1950er Jahren nachempfunden. Mit elektrischen Teelichtern kann die Unterseite und der Zwischenring zur Kuppel stimmig illuminiert werden. Das UFO-Model besteht…
Used for a s550e that had a missing bracket when it arrived. You can use fusion to adjust it for your toilet. I printed mine in petg 100% infill. Seems sturdy, can really crank it down.
Mein selber erstellter 50er ist ideal für Geburtstage. Egal ob Geschenk oder Dekoration man wird sich darüber freuen. Es ist einfach zum drucken, aber ich würde Etwas 3d Lac empfehlen.
I printed it in PLA+ Using an 0.4 Nozzle
A top mounting plate for the SkyWatcher EvoGuide 50ED, allowing for guide scope, mini pc and focuser. The rings holding the telescope were originally purchased from craftology3d on ebay. The Pegasus Power box advanced is connected to the…
DYI 3D printed GT2 Kit for autofocus Sky-Watcher Evoguide 50ED with ZWO EAF electronic focuser. You will also need a GT2 6mm width 260mm length timing belt and a 2GT timing pulley with 5mm bore, 6mm wide and 12 or more teeth for the ZWO…
Install the BlazeCut T050E along the top left or right in the Original Prusa Enclosure. I printed in PLA with an infill of 30%. Recommended to go with 70%. Printed with supports. They probably aren’t required. To install, use an M3 bolt…
Proxxon multi holder pd250e, Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: Yes Resolution: 2 Infill: 15 Filament: universa pla yellow Notes: Proxxon multi holder pd250e, Category: Hobby
These braces are designed to mount a Blazecut T050E suppression tube to the inside top of a Prusabox enclosure using magnets. There are files for 8x4mm and 8x3mm magnets. The magnets are a snug press fit. No glue should be needed, but…
Replacement baseplate for a Ferm Router FBF-850E . The baseplate only fits one way, as one of the mounting holes is placed off centered!
This is a PVC pipe wall mount for a German HT-Rohr, diameter 50mm. No need to drill holes, just use a standard Tesa Powerstrip for wall attachment A lateral M3 bolt or screw can be used to secure the pipe from sliding downwards.
Das dazugehörige Gehäuse MG-01 findet sich hier: https://www.printables.com/model/1144564-modulares-gehause-mg-01-fur-esp32-arduino-raspi-il Das dazugehörige Gehäuse MG-02 findet sich hier:…
Adaptor plate for SkyWatcher EvosStar 150ED and Lacerta Octo 2" rack and pinion focuser. Design files in Fusion 360 format and .step are included for remixes. I designed this adaptor to connect my heavy duty Lacerta 2" rack and pinion…
An attachment for Proxxon 150E. Allows to use a cheap Wi-Fi microscope for part centering. There's a hole in the back where an optional 6mm brass insert can be pushed in for tilt adjustments. Support the author: The model is free to use…
Dew Shield for Sky-Watcher Evoguide 50ED
adapter for connecting dishwasher to birusa WD-750E2 disposer (standard Chinese model copied from bone crusher or inksinkerator), which has only a threaded hole instead of a spigot.
enduro mobilet için kadran plastiği
130mm 100mm 75mm 60mm Stencil for painting/Airbrushing decal Suzuki GS550E (just the GS550E) part ! See photos
Der Drucker PL50E kommt aus China und ist unter verschiedenen Markennamen erhältlich. Er kann bis zu 4" breites Etikettenpapier beliebiger Länge bedrucken. Im Inneren sind zwei Führungsstege, die das zugeführte Papier zentrieren. Leider…
130mm 100mm 75mm 60mm Stencil for painting/Airbrushing decal Suzuki GS550E (just the GS550E) part ! See photos
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
Hier gibt es einen Einsatz der genau in den SQ14 Rahmen von einer Janome MC550E und kombatiblen Modellen von zum Beispiel Elna passt. Der Stoff wird mit einer Klemmplatte gehalten und nicht überdehnt. In Ober und Unterplatte sind Magnete…
Very slim and compact replacement case for the AVM FRITZ!WLAN Repeater 1750E. Adds a wallmount and all aready existing features from the original case. Open holes around the mains voltage area, visible on some of the images, have been…
