Liczymy pasujące modele…
Brackets to mount the GE 45170 powerbar in the shop or under a desk. Category: Organization
Wydruk około 1,46 €–1,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bought this DeWalt DCV580 at a thrift store with only the hose. I needed attachments and made these with a way to store the extras. Crevice Tool: Similar to the original and also clicks into the DeWalt handle for storage and will not…
This model is compatible with the lego system.
Simple wall mount for a Govee H5179 sensor. Flat back with screw hole for a fastener or use with a command strip or some double sided tape.
This model is compatible with the lego system.
Supplement comfort legs for acer nitro 5 (25 mm). 2024/02/25 New model stilized. I add the f3d to be able to modify, as it seems that there may be different sizes or models between countries. Acer nitro 5, legs to slightly tilt the…
These are replacement and splitted cups for STANLEY FATMAX Pro Shallow Organiser (1-97-517). There are 3 kind of cups : Standard Splitted in 2 Splitted in 4
Customized version of https://www.thingiverse.com/thing:1246651 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1246651 Instructions Using the following options: LargeEndMeasured = inside LargeEndDiameter…
Included two STL files - white part and black part. I printed ok without any supports or brims.
BMW part #51711947419. I designed it on Tinkercad using an actual part as a model. Print it using a strong material (ABS should be ok). Slice with infill 20% or higher.
I print PLA with a layer thickness of 0.2. No supports. Good works PETG.
Un modelito sensillo del avion Pucara A-517 Argentino
This model is compatible with the lego system.
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
Audi Q3 DPA 99551799802 Abdeckung, Scheinwerfer für AUDI Q3 (8UB, 8UG) - OEN 8U0955275E
Somebody threw out this broken toy excavator. The only problem with it was a broken bucket linkage. It seemed quite an easy fix, so I gave it a try. It’s holding up for a couple of hours digging pebbles. Part 1 is not an exact copy of the…
I used 0.2mm on the print (shown on the pictures). I recommand laying it flat on the exteriors side for a better print.
This is a Part for a 1969 Zündapp. It is a “Sokkel” for fitting the rear light to the fender. it is printable without supports. Picture shows the printed part after sanding and painting, i printed the part in ASA because of the uv…
Save space and show off the more interesting angles by mounting your LEGO Y-Wing kit vertically on a wall. I plan to make a mount for each of the kits I have over time. Check back in to see the collection grow!
Original Author: Daves517 Original Author Profile: https://www.thingiverse.com/ Daves517 /designs Original Design: https://www.thingiverse.com/thing:1647014 THIS DESIGN IS NOT ORIGINAL AND HAS BEEN MODIFIED FROM THE ORIGINAL. THE LICENSOR…
Spare gears for kitchen robot Moulinex Masterchef FP517
PART 5175 Bracket 2 x 4 - 1 x 4 (5175)
Big thanks to @enderman and @Synthead Remixed two models into one, now you can mount mosfet to your DIN rail
Didn't like how my DeWalt DCV517 blew out the sides, so made a thing to redirect the venting upward and backward Print as oriented. Use tree supports.
This is a Bushing (afstandsbus) for the chrome decoration on the front shock absorber. Zündapp part no: 515-12.209 Should ideally be printed in Nylon But ASA and/or ABS will do as well.
Replacement for 12mm plugs on BMWs and Minis. These are usually found on the inside of doors. A couple of mine were missing so I reverse engineered from one which was still present. Print with TPU or TPE. TPU was fine but I'd also quite…
BMW do not have a part number and do not seem to sell the clip without the seal. This is almost a 1:1 copy of the original clip which holds the sides of the rear roof seal to the side trims. Print on the side for layer strenght and flex.…
Adapter for mounting USB optical head for energy meters OR-WE-516, OR-WE-517 -Operates in IEC 62056-21 (IEC1107). Compatible with CP2102 Micro USB to Near Infrared IR Optical Magnetic Adapter Converter Cable for Electricity Meter Gas…
Bushing for the inside of the front shock absorber on a Zündapp 517. Zündapp part no: 517-12.131. i had the best results printing with a bigger nozzle and helical printing.
Big thanks to @enderman and @Synthead Remixed two models into one, now you can mount mosfet to your DIN rail
What? This is a stand to shift up and tilt a propietary-danish-brick-brand Y-Wing 75172. The height in its highest point is below 15cm (5,9 inches) and tilts it 40º. Why? I put all my LEGOs on shelves and I realized that most of my Star…
Save space and show off the more interesting angles by mounting your LEGO A-Wing kit vertically on a wall. I plan to make a mount for each of the kits I have over time. Check back in to see the collection grow!
ORGANIZER GT517 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
I got tired of my Pittsburgh Pro mini screwdriver set rattling around in a drawer. The original case takes up way more space than the tools actually need, so I designed a 1×3 Gridfinity bin that holds the handle and all three bit rails in…
Hallo Leute, Ich hatte noch so ein LED Strip Diffusor Profil von Paulmann 70517 übrig. Ich bin ein absoluter Anfänger in Sachen 3D Druck. Hab mal versucht das Beste daraus zu machen. Für Verbesserungen stehe ich gern zur…
Just a cradle whipped up for a dell 5179 tablet thingy. It's strong enough to hold the laptop upside down. It works great printed on my printer, but some tuning may be necessary for yours. Category: Computer
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
Cover to keep things from falling into drive during assembly. To be removed before power up.
Diese Halterung befestigt das Govee H5171 ( Amazon Link ) an der Anycubic ACE Pro ( Anycubic Link ) um die Temperatur und Luftfäuchtigkeit im ACE Pro via Bluetooth zu messen und an Home Assistant weiterzugeben. Echtes Bild vom Hygrometer…
Just a simple adapter going from R4 to smaller diameter for a camera mount that feels good to use. :) Version Modeled diameter 2410a R2.6 (With original R4 model) 2410b R2, R2.5 & R3 (Chamfered)
I wasn't able to purchase Celestron's part number 51710-3 for my 8" Evolution SCT. I subsequently made my own and the alignments produced were perfect. Calibration data are attached and it uses the same screws as the red dot sight. May or…
51739 (Plate 2x4x18° or 63° 2x4 Double Wedge Plate) Lego piece about 3 grams
Arm axle screw head seems to protrude outside of 9.5 cylindrical front part.
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
This model is compatible with the lego system.
ORGANIZER GT517 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Adapter for mounting USB optical head for energy meters OR-WE-516, OR-WE-517 -Operates in IEC 62056-21 (IEC1107). Compatible with CP2102 Micro USB to Near Infrared IR Optical Magnetic Adapter Converter Cable for Electricity Meter Gas…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Zodiac Vacuum Cleaner R0517000 Propeller Replacement
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
