Wyniki wyszukiwania: 53v

Sortowanie

25 modeli

P
Printablesliterallylara

Anbernic RG353V/S Grip

I designed this because the existing models on the internet were either paid or not well made. It fits snugly and does not slide off. The current version turned out to be slightly smaller than expected, but it still fits my (average size)…

Pobrania
1048
Polubienia
64
Ocena
5
P
PrintablesJoshua C

Anbernic RG353V "Showcase"

This case is made of two halves that can be connected with either a length of filament, or the use of #16 finish nails as “hinge pins” to connect them together. The case features a slot in the back to use as a display stand when not being…

Pobrania
325
Polubienia
39
Ocena
5
P
PrintablesKindaPrinty

Anbernic RG353V Snap On Face Protector

Prints fine without supports. Turn on ironing to clean up the inside faceplate that actually makes contact with the rg353v. I used a roll of felt tape to line the inside from amazon. This is really rough as this is my first remix but…

Pobrania
267
Polubienia
23
Ocena
0
P
PrintablesMichael Fomenko

Dock for Anbernic RG353V / RG353VS

3D printable dock designed for the Anbernic RG353V handheld gaming console. This dockholds the console during storage or charging. The dock includes a channel for a type c cable. Prints fine without supports.

Pobrania
243
Polubienia
19
Ocena
5
P
Printablesmarian42

Stand for Anbernic RG353V / RG353VS

Display stand for the retro gaming devices Anbernic RG353V and RG353VS.

Pobrania
165
Polubienia
11
Ocena
0
P
Printableswaffleghost

RG353V Skadis Mount

Basic Skadis mount for the Anbernic RG353V/VS. Supports needed for Skadis Pegs. Included STL, F3d, 3mf files. Used IKEA Skadis Fusion 360 Double Hook: https://www.printables.com/model/118225-ikea-skadis-fusion-360-models/files

Pobrania
148
Polubienia
15
Ocena
0
P
PrintablesAstroMike83

Anbernic RG353v Snap Case

This is a snap case for the Anbernic RG353v. It's meant to be felt lined to protect the device and to create a tight fit. I used 1.2mm x 31.8mm wire brads for the hinges.

Pobrania
127
Polubienia
8
Ocena
0

Anbernic RG353V/S Grip Stand

Link for grip : https://www.printables.com/model/469500-anbernic-rg353vs-grip

Pobrania
84
Polubienia
14
Ocena
3
P
PrintablesKoog

RG353V holder (Flat)

%% update More beefy handle versions are added as v2. better experience for me. furthermore, no need to print with support. %% Initial release Ergonomic(?) adapter for the Ambernic RG353V. Initial release. Just tested. It needs printing…

Pobrania
69
Polubienia
8
Ocena
4
P
PrintablesHuy Nguyen

RG353V Grip - Easier Print

Flatten the bottom of the grip so that it could adhere to build plate more easily with just a brim and can print more reliably.

Pobrania
50
Polubienia
6
Ocena
0
P
PrintablesPrincessJakey

Anbernic RG353v Honeycomb Wall Mount

remixed for honeycomb wall storage -untested-

Pobrania
49
Polubienia
9
Ocena
0
P
PrintablesHOFDA

RG353V Display Charging Stand

A display stand that can also hold a USB cable to charge the RG353V. I designed this stand to be used with the USB cable that comes with the handheld. To put the cable in the stand: First, insert the USB cable through the hole in the back…

Pobrania
47
Polubienia
3
Ocena
0
P
Printablesamish_rabbi

TPU RG353V Protective Cover Set

A friction/stretch fit TPU protective cover set for the RG353GV. Very slim and keeps it pocketable but protects the buttons/triggers Front and back covers work on their own, personally I usually just use the front cove

Pobrania
45
Polubienia
9
Ocena
0
P
PrintablesAntonio Vazquez

Anbernic rg353v/vs grip remixed

Print vertically with tree supports.

Pobrania
45
Polubienia
9
Ocena
0
P
PrintablesJDubya

Anbernic RG353V/S Grip Stand with Cord Cutout

I wanted to be able to have my RG353V plugged in and charging while on the stand, so I designed a slot that matched the port cutout in the grip (LINK here ). I also wanted to incorporate the Anbernic logo into design.

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesHuy Nguyen

RG353V Grip stand with charging hole - easy print

Simple stand for the grip. Could also be used without the grip for playing with a controller. The viewing angle is perfect (IMHO) for when sitting at a desk/table. I don't charge it while it is on the stand but there is a hole to pass the…

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesIxitxachitl

Anbernic RG353V/S Charging Dock

The adapter it was designed for is https://www.amazon.com/gp/product/B08CDGHQWF/ but if you like i can make additional versions if requested, just send me a link. I didn't need supports but they may be necessary depending on your settings.

Pobrania
27
Polubienia
2
Ocena
0
P
Printablesoviwan

Yamaha 34X 34Y 53V 35E 1HR 2AJ DT 80/125 LC 2 Fork Caps

Push in Diameter 32,7mm, Outer Diameter 36mm. Print & Scale for press fit. Push in Diameter 32,7mm, Outer Diameter 36mm Vent Hole should avoid popping out of cap Inner Cone for limiting Support Material. Update 03/30/25 made my first…

Pobrania
18
Polubienia
0
Ocena
0
P
Printablesoviwan

Yamaha 34X 34Y 53V 35E 1HR 2AJ DT 80/125 LC 2 Fork Seal Tool

Simple Tool to press in the Seal for Yamaha 34X 34Y 53V 35E 1HR 2AJ DT 80/125 LC 2 Forks (36mm). printed from PETG use ≥ 8 Bottom Layers (Hammer Side), ~5-6 Top-Layers (Seal Side) infill > 25% First Print worked up to two fork Sets (4…

Pobrania
15
Polubienia
3
Ocena
0
P
PrintablesForeSt1

Asus FX53VD Drive Cover

Plastic bezel / trim piece for the Asus FX53vd. Fitment isn't perfect, but it's better than a gaping hole on the side of your laptop. Make sure you print with supports touching the build plate, IN THE ORIENTATION OF THE SLT. Yes, there…

Pobrania
10
Polubienia
1
Ocena
0
P
Printablesoviwan

Yamaha 34X 34Y 53V 35E 1HR 2AJ DT 80/125 LC 2 Fork upper Bearing/Bush Tool

Simple Tool to press in the upper Bearing/Bush for Yamaha 34X 34Y 53V 35E 1HR 2AJ DT 80/125 LC 2 Forks (36mm). printed from PETG printed from PETG use ≥ 8 Bottom Layers (Hammer Side), ~5-6 Top-Layers (Seal Side) infill 25 - 30% slides…

Pobrania
7
Polubienia
2
Ocena
0
P
PrintablesJib

RG353V Travel Case

I did not like the position of my thumbs on the console with the typical grip, so I wanted to design a case that could improve this. It will protect the screen and can be stored while gaming as an improved grip. My goal was to keep it…

Pobrania
6
Polubienia
2
Ocena
0
P
Printablesoviwan

Yamaha 34X 34Y 53V 35E 1HR 2AJ DT 80/125 LC 2 Head Light Bottom Grommet

while rebuilding my DT, i could not find this part, even the Yamaha Spare parts lists didn't show anything. So maybe something in the Design has changed for the Headlight fixture. This is the Grommet for the rectangular cut out of the…

Pobrania
2
Polubienia
0
Ocena
0
P
Printablesoviwan

Yamaha 34X 34Y 53V 35E 1HR 2AJ DT 80/125 LC 2 Chain Roll

Yamaha 34X 34Y 53V 35E 1HR 2AJ DT 80/125 LC 2 Chain Roll. 34X 53V ChainRollerStd: Simple Cylinder Roll for Standard Plastic bushing. Easy fit. Printed from TPU, 30% Infill, 4-6 Walls. Place chamfered end to collar side of bush. 34X 53V…

Pobrania
1
Polubienia
0
Ocena
0
P
Printablesmarian42

Anbernic RG353V / RG353VS holder for Ikea Skadis

Print at 45° angle with supports to get a better quality for the downward facing fillets.

Pobrania
1
Polubienia
0
Ocena
0