P
Printablesthall72
Lego Compatible (29633.dat) Minifig Hair Bob Cut Parted in Middle
This model is compatible with the lego system.
- Pobrania
- 453
- Polubienia
- 49
- Ocena
- 5
Wyniki wyszukiwania: 633
44 modeli
P
Printablesthall72
Lego Compatible (3633.dat) Fence Lattice 1 x 4 x 1
This model is compatible with the lego system.
- Pobrania
- 314
- Polubienia
- 34
- Ocena
- 4
P
PrintablesJochemB
Lego part 6331723
I was missing this part, and although you can buy it, why not make it! Use FreeCAD. I measured one I had with calipers, printed it in PLA 0.15 quality and found the sizes didn't match. So I increased the tight sizes (i.e. now stuff fits,…
- Pobrania
- 227
- Polubienia
- 15
- Ocena
- 0
P
PrintablesZedic
Classic RC10 Gold Pan Servo Mount Posts Part 6336
RC10 Gold Pan Servo Mounts These are very simple but necessary. They replace Associated part Number 6366. NOTE: The originals required the use of 2 washers under the rear servo mount. See the attached picture from the RC10 Manual. To…
- Pobrania
- 220
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMekDrafter
Elongated Nut DIN6334
Elongated Nut DIN6334 - M6/M8/M10/M12/M16
- Pobrania
- 206
- Polubienia
- 52
- Ocena
- 0
P
PrintablesNebukadNezzar
Audi VW Seat Hood Release Handle Bracket (Bowden cable connector) for Golf, Polo, Touran, EOS, Jetta, TT, Q3, CITIGO etc. (VW Part # 1K1823633B)
This is a replacement part for the interior hood release handle bracket (VW part #1K1823633B), which connects the hood release handle and the bowden cable. If this part is broken, your hood release handle can't work properly, preventing…
- Pobrania
- 193
- Polubienia
- 12
- Ocena
- 0
P
PrintablesThiagosgaguiar
Lego Technic - 6331026
Replacement LEGO Technic Part: 6331026 Are you missing the LEGO Technic part number 6331026 ? You're not alone! I encountered the same issue while building my LEGO Technic set, so I decided to design a 3D printable version of the missing…
- Pobrania
- 177
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMr.
Lego Compatible (6338428.dat) Thin 1 x 2 - Axle Holes
This model is compatible with the lego system.
- Pobrania
- 172
- Polubienia
- 3
- Ocena
- 5
P
Printablesthall72
Lego Compatible (2633.dat) Friends Hair Female Long, Parted Bangs, Swept Back in Bun, Hole in Back
This model is compatible with the lego system.
- Pobrania
- 134
- Polubienia
- 23
- Ocena
- 0
P
Printablesthall72
Lego Compatible (24633.dat) Minifig Head Duck
This model is compatible with the lego system.
- Pobrania
- 117
- Polubienia
- 30
- Ocena
- 5
P
PrintablesKnexFour
Monster Mouth Headphone Holder - Clampable: Logitech G933/G935/G633/G635 Remix
I've been using this headphone clamp for a long time, it's awesome! I recently got a new G933 and realized how much the foam band had squished over time from resting on the original Monster headphone holder. I added an indentation so it…
- Pobrania
- 117
- Polubienia
- 7
- Ocena
- 5
P
Printablesthall72
Lego Compatible (65633.dat) Windscreen 6 x 6 x 1.333 Angled Curved
This model is compatible with the lego system.
- Pobrania
- 81
- Polubienia
- 17
- Ocena
- 5
P
PrintablesHiro Protagonist
Hakko 633 Adapter for Pinecil Iron
---Alpha2 version-- If you try it, please send me feedback. If you make a public comment, perhaps mark it as “alpha2” so people seeing finished versions know that the comment is applies to an early version. Uploaded 3MF this time, no STL,…
- Pobrania
- 70
- Polubienia
- 15
- Ocena
- 5
P
PrintablesSecurityYak
Logitech G633/G933 Headphones Right Hinge Pin
This is a right hinge pin for Logitech G633 headphones. The right hinge on mine snapped, so I took the broken pieces and designed this one. It could probably be mirrored to work on the Left hinge, but I've not taken them apart so I can't…
- Pobrania
- 69
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMurdogk
lego 30134 40243 4175 3633 3185 3224 30056 19121 41823 33303 32932
lego 30134 40243 4175 3633 3185 3224 30056 19121 41823 33303 32932
- Pobrania
- 52
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFoqsiu
Anker MagGo 633 stand / Apple Watch charger
Quite simple model of stand for Anker 633 with Apple Watch charger. I suggest to use stiff filament like PLA or ABS.
- Pobrania
- 52
- Polubienia
- 4
- Ocena
- 0
P
PrintablesCalvin C
BMW Exhaust hanger (outer) 18307633093
Did part of your exhaust hanger also crack, leaving your exhaust dangling by the flex pipe or rear hanger? Well mine did, with the bushing itself still in good condition and chilling on the exhaust. This replaces the outer cast aluminium…
- Pobrania
- 41
- Polubienia
- 5
- Ocena
- 0
P
Printablesfreiheitsgrad
Cross Knob acc. DIN 6335 B
Details Cross knob (dt:'Kreuzgriff') according to DIN 6335 B, except for the hole diameters and the hex sockets. See Details below. 'DN' in filename refers to outer diameter in mm. DN63 - M8 hex bolt/ nut DN50 - M8 hex bolt/ nut DN40 - M6…
- Pobrania
- 40
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCattus Printus
Makita DJV182 dust nozzle (126331-0) adapter for Dyson DC19
Dust collection does wonders. When i used jigsaw for the first time the problem was that dust from cutting would obscure view on cutting blade and made guiding tool difficult. To prevent that from happening i decided to make an adapter to…
- Pobrania
- 38
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRevolt
Anker 633 Magnetic Wireless Charger dummy battery
I bought the Anker 633 Magnetic Wireless Charger , but I didn't want to have the phone permanently charging, so I created this replica in order to keep the role of a MagSafe stand. Instructions: • Rotate the back part with the small holes…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSynergyx26
Anker 633 Mag Go - Skadis
Skadis holder for the Anker 633 Mag Go 10k mAh. Has spots to still be able to plug in the USB-C on the side or USB-A on the bottom. Your iPhone can still attach to the MagSafe portion in the case you need want to hang your phone on your…
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDigitalRebelSVK
IKEA LEDBERG 21633 L1708 SPARE MOUNT RING
Replacement of original mounting ring for LEDBERG round light from IKEA Printed lying on mounting eyelets, with standard supports for upper ring. Light just snaps in like in original. My print is printed as draft 0,28mm layers with the…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGolden Picture Studios™
Lego compatible Fence 3633 (small)
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to the LEGO Fence…
- Pobrania
- 14
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDante
Yet another Connector for HP6632 or and 6632A/6633A/6634A and 6631B/6632B/6633B/6634B
4x Hirschmann SEB 2600 G M4 or any other connector with a 12mm installation diameter 2x m4 12mm m4 (fits into the screw holes for the rackmounts) I printed it without support
- Pobrania
- 13
- Polubienia
- 5
- Ocena
- 0
P
PrintablesHiro Protagonist
Hakko 633 599B Sidecar Extra Pot
Hakko 633 Sidecar Someone mentioned that they like the sponge and I do too. So thought that why not have both?? This model holds two of the Hakko 599B pots. It uses cheap 10x2mmish “fridge magnets” to securely attach to the bottom of the…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCardinalSong
633a Saltshaker Mic Clip to On Stage Quick Connect Female
I bought a saltshaker mic last week and needed a way to connect to the quick connect system (On Stage QK2) that all of my stands are on….so here we are. If you have a 633a, it should work. There were multiple manufacturers (Altec, Western…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
Printablesbrchr
Vornado 133/533/633/683/753 leg fastening nut
I printed in PETG at 0.08 mm layer height, but I think it would work fine in PLA or other resins, too. The small layer height helps keep the threads smoother.
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesF Engineering
ISO 7000-0633 front fog light
EN: To identify the control that activates a special light (usually yellow in colour) located in the front of the vehicle to aid forward illumination in foggy conditions. To indicate the operational status of the front fog light. DE: Zur…
- Pobrania
- 11
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTraceParts
DIN 6330 Steel Fixture Nuts, with Spherical End
More part numbers and CAD formats on www.traceparts.com/goto?Product=90-14092020-047534
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printablespatzi
Volcano Release Trigger Playmobil 30276330 - 30 27 6330
Vulcano Release Trigger from Playmobil set “Triceratops with Baby” I printed this model standing on on the side with organic supports. Vulkan Auslöser für Playmobil Set “Triceratops mit Baby und Vulkan” Ich habe das Modell mit organischen…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
PrintablesICEWING 177
Potez 633
Potez 633 air defense fighter Category: Vehicles
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
Printablesbenzol58
Bandsaw insert Holzkraft HBS 633 S
Einsatz für Tischplatte passend für Holzkraft HBS 633 S Bandsäge.
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesИннокентий
Makita 6337 ni-cd ni-mh terminal part
Battery terminal ni-cd
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCollin Rottinghaus
Hakko 633 Syringe Holster (Flux/Desolder Pump)
Snaps into side panel. Holster fits for ~19mm body syringes Works with all of my flux syringes and desoldering pumps Please ignore my broken camera sensor
- Pobrania
- 2
- Polubienia
- 2
- Ocena
- 0
P
Printablesjohntrandall
Thermador / Bosch Refrigerator Drawer Rail Clip — 00633652 Replacement
Printable replacement for the freezer drawer slide rail clip on Bosch / Thermador / Gaggenau built-in refrigerators. Replaces OEM part 00633652 (supersedes 00604665; also sold as AP5953399 / PS10060851). Fits the T24/T30/T36 built-in…
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printables
lego 30134 40243 4175 3633 3185 3224 30056 19121 41823 33303 32932
lego 30134 40243 4175 3633 3185 3224 30056 19121 41823 33303 32932
P
Printables
Replacement GM Part 13263335
Replacement part for the HVAC air duck lever (LVL) gear for GM vehicles like the Chevy Cruze. Designed after the factory part with obvious strength improvements. Print in PC MAX, ABS or PETg. Since it is to be used in a car which can be…
P
Printables
Lego Technic Axle and Pin Connector 6332570
This is a recreation of Lego Technic part 6332570 (axle and pin connector). I printed on my Prusa i3 MK3S at .10 detail. After printing, I would recommend either the .07 or .05 ultradetail. The part works perfectly but it is not totally…
P
Printables
Festool systainer drawed rail (Based on @k97_1633741)
Festool Systainer Rail (Based on @k97_1633741)