Liczymy pasujące modele…
This is a two-part housing for a cheap 64x32 LED matrix, including mounting for a Raspberry Pi 3A+ BOM 1x 192x96mm LED panel like this one . Unfortunately, this listing makes no guarantee of screw hole locations, however I've ordered…
Modified the 32x32 P3 version to make it 64x32, as printing 2 32x32 parts didn't work for me Print Settings Printer: Artillery Genius Rafts: No Supports: No Resolution: 0.2 Infill: doesn't matter Filament: Any PLA Black Category:…
See https://github.com/SMerrony/picopanel for a project using this case.
Everything was printed with PLA. The screen has a layer height of 0.2 mm over the pixels and around the pixels there is a mesh on a layer height of 0.4 mm to minimize warping from the heat coming from the LED matrix. It is important to…
About This Case This is the official case for the Original Flight Tracker project : https://colinwaddell.github.io/FlightTracker/ The case has been designed to keep the finished Flight Tracker as sleek and minimal as possible while still…
This is a 2-part interlocking model designed to house the following components: 64x32 RGB LED Matrix - 4mm pitch Adafruit Matrix Portal - CircuitPython Powered Internet Display Black LED Diffusion Acrylic Panel 12" x 12" - 0.1" / 2.6mm…
Eine kleine Halterung wenn man etwas großes vorhat.
A smaller version of my 3d rgb led matrix project. The project can found at: https://www.instructables.com/A-Simple-3D-Printed-Frame-for-an-RGB-LED-Panel/ The panel used in this project is https://www.adafruit.com/product/5036 It is a…
A housing for this common RGB panel: https://www.waveshare.com/wiki/Pico-RGB-Matrix-P3-64x32 Although the board was designed for the Pico W board, mine is running with the newer Pico 2 W and CircuitPython 10. I’m not using a diffuser, but…
This is a stand for the Adafruit LED panels. The one I bought is this one: https://www.adafruit.com/product/2276 ...and I used a Pi with this HAT: https://www.adafruit.com/product/2345 There are a ton of HUB75-compatible displays out…
64x32 Matrix Display Mount for JtingF Protogens. For a cleaner and more serviceable approach to the JtingF protogens. The holes line up with most displays and the bigger holes line up with the stock or remixed inner visor. Both of the 2…
