Liczymy pasujące modele…
Remix to fit FX888 soldering iron. Uses M3 x 5 brass inserts instead of captive M3 nuts. Requires 2 x M3 12 hex head bolts. Printed in PLA as this is not near the hot parts. It clamps around the part you hold with your hand. If you print…
This is a remix of the PRUSA RC3 Face Shield, in 888 format (the holes are 80-80-80 spaced for a standard 4-hole punch, unlike the 80-60-80 of the original). This version is also reduced in height, with a 8mm tall section for the visor…
I remixed the "Manta Ray Face shield" by Joe Telling to fit the european 888 hole punch standard.
A beautiful round flower vase with thick vertical curves that go all around; for decorative purposes to hold artificial flowers, or anything else. It is 170mm tall and 107mm wide. The photo shows the vase printed in vase mode, which…
Parts Needed: - Baofeng BF888S UHF HT - Heltec V3 - M3 x 30mm Allen screws and nuts - Some soldering required
A tray that can keep all your soldering equipment secured in one area. Designed to hold a Hakko FX-888D Model Soldering Iron and Station. Complete with 12 T-18 size slots for nozzle heads. A solder spool holder with varying size holes to…
This model is compatible with the lego system.
Clamp for the Hakko FX-8801 handpiece (supplied with FX-888D) from fns720 's h eat-set insert press modified to fit thrutheframe 's press for 2020 extrusion and MGN9 rail. The clamps are secured with a 40mm M3 bolt. Two versions are…
Couldn't find something to attach to this particular Hakko model to hold my spare tips and solder. So I made this one. Category: Tools
A company I work with have replaced all their radios with Baofeng BF-888 models, and they wanted to switch over to Klickfast studs to maintain compatability with standard UK ambulance uniforms (which generally come with klickfast docks…
A Simple tip holder I designed for the Hakko FX888d soldering iron. The holes are a little snug at first but inserting the soldering iron tips a few times will loosen it up.
Very simple tip holder for the HSW. Holds 14 tips. This is designed to be easily removed from the HSW when needed. All feedback welcomed.
This custom-designed oil filler funnel fits directly into the engine opening of the EA888 EVO 4 engine , as used in the VW Polo GTI IV (AW) and many other vehicles with 2.0 TSI engines . It fits into the engine’s oil fill port where the…
This is lego piece 43888, also known as the 1x1x6 pillar I found it online as a .ipt file and converted it to .stl with fusion360 It is used in a few sets, I am using it for the Lego Saturn V launch escape system I suggest you print it on…
A case for Hakko FX-888(D) for storage, travel and use. Can be used with either half up or down. Use together with the insert designed for this case. https://www.printables.com/model/1127938-hakko-fx-888d-rugged-case-inlay Additional…
This model is compatible with the lego system.
I have been looking everywhere to be able to find any model or even measurements of the original head unit for my Anytone AT-5888UV radio. I finally found this and it works nice. Since Im still learning how to design with CAD, I…
A tray that can keep all your soldering equipment secured in one area. Designed to hold a Hakko FX-888D Model Soldering Iron and Station. Complete with 12 T-18 size slots for nozzle heads. A block of 3 holders for thin tools such as…
An inlay for Hakko FX-888(D) Rugged Case. https://www.printables.com/model/1127838-hakko-fx-888d-rugged-case
3d scan of the honeywell turbo that comes factory on the 2013.5-2015 volkswagen CPPA/CPLA engine
A fully filled front visor piece to allow stacking (courtesy of my daughter Amy age 11). Added 2 and 10 stack versions of the solid one (apologies messed up on the original stack files - these are updated) Added open skeleton and open…
Prusa faceshied in the speedprint format modified for a standard four hole A4 hole punch. (888 - 80mm between all holes - not the 80-60-80 of the prusa). Added stacks for a 0.3mm layer height in 2 (to test) and 15. ie only print with a…
Printed PLA .2 layer no supports and all parts should be positioned to print. Make sure you print 2 side rails and 2 rod pins. My printers tolerances are pretty tight but I did have to hit one of the side rails with sandpaper very…
After you have ascended and bought the based chisel tip you may be looking for a place to put the conical tip, (no not the bin). This clip offers a neat solution without losing the tip cleaner. 3, 5 and 8 tip variants in both left and…
Modified an intake blaster from an n54 to fit the EA888 in my GTI.
I printed a bunch of mathgrrl's Sunburst Clocks and bought the clock mechanisms she recommended, just to discover that there's nothing included to mount them to a wall. So, after looking at a similar listing on Amazon I "reinvented" a…
LEGO DUPLO-compatible Turn Brick 2x2 Design ID: 10888 This brick comes in two parts. The top one spins a full 360°. Just press it firmly onto the base until it clicks into place – and you're good to go! Printing information The STL file…
I've found the soldering tip hole to be a little tight, at some point I will increase the hole diameter.
PETG 100% infill Probably won't fit any other combinations than 888 + K-Tek Stingray Small X Use this instead of the velcro (I have cut it off) - for more room on the sides, a more rigid frame, and a fixed location of the 888.
This magnetic tips holder for the soldering station Hakko FX-888D was inspired by amcanhazdeath's Hakko Tip Holder . The Hakko FX-888 was elected as Japan Design Selection 2009 according to Hakko's official website . Here is my attempt to…
Mercury Mercruiser Marine Screw Attaching Latch 98889 replacement part. Print in pteg, no supports
Got really annoyed with the tips for my soldering iron tipping over. This is a better solution to store these tips. May be a bit tight depending on your printers calibration. May be worth scaling to 110% Soldering Tips:…
Hakko FX-888D soldering station modification that provides a way to hold solder and extra tips. Easily mounts to soldering iron holder for easy access to solder and extra soldering iron tips. Cleaning brushes and soldering iron holder are…
Hood seal / Windscreen support. The insert needs to be adjusted with a knife!
Inlet elbow for the is12/is20/is38 turbochargers modified to include an AN-12 fitting for the PCV system or catch can. Design based on the OEM part, but with less restriction and a clearer path for the intake air.
The sponges I used to buy expand by about 10% on the plan. The right template for me is about 90% of the original size. You can customize your template using the OpenSCAD script available to download.
For this press: https://www.amazon.com.au/gp/product/B077LPTD2T https://www.amazon.com/DASBET-Universal-Adjustable-Workstation-Workbench/dp/B0CPJ1JCD1
5-position hot air rework nozzle holder designed with the Aoyue 888A rework station in mind, although it may fit other models. The Aoyue rework stations are made by SRA Soldering Products with a 21.5mm inner diameter on the nozzles so any…
This is an old, generic percussive (thumping) back massager that came with a couple heads, a rounded one and a bumpy one, and my spouse requested a pointier version of the rounded head to target muscles better. I measured the threads on…
Door for cabin filter for diy install filter. More info here
HAKKO FX-888D Holder (2 Part Version) Combined the vertical piece and the main base of the model by cluckOmatic and moved it a bit farther away from the main box. Horizontal piece is unchanged. I quickly meshed these two items together so…
made by 3d scanning the original VW coupler. The billet ones are ill-fitting and are a pain to get to seal. print this in a high temp compatible material. I used fiberology CF-PCTG and it holds 30 psi no problem
This is a re-made based on Zack's original template and has been improved with the following modifications, taking into account MachoThick's design : A reserved charging hole for ES15. An added Hakko FX-888D soldering iron tip hole…
The typical fridge magnet that your great-great-grandfather brought from Paris in 1888 :-)
A remix to hold 9 tips instead of 5. Tweaked the dimensions for a better fit. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament: ESun ABS+ Notes: . Category: Tools
I used TPU 82A, works really good, but you can go with more stiffer TPU.
A magnetic tip holder for Hakko FX-888(D). Additional parts Eight 6x2 mm round magnets Printing Pause at beginning of layer 67 to insert magnets when printing at 0.2 mm layer height.
Printer Brand: i3 MK4 Rafts: No Supports: Enabled Layer Height: 0.2mm Nozzle Diameter: 0.4mm Material: PETG
This model is compatible with the lego system.
Insert for holding soldering iron tips.
This a remix of (https://cults3d.com/en/3d-model/art/android-bugdroid-figur). I added the Jet pack to Andy by remixing another design that I found on TinkerCad (https://www.tinkercad.com/things/lyyOkAHoclN). Once I figure out why the…
More part numbers and CAD formats on www.traceparts.com/goto?Product=90-19012022-030019
patreon.com/aetherusstudio subscribe for license
After printing the plain FX-888(D) rugged case (which is awesome, btw), I started aching to put a logo on it!!! You can print this separately or mesh boolean join this into JP's ( https://www.printables.com/@JP_156503 ) awesome design. I…
I kept forgeting my soldering iron on and wanted to "hack" it with a smart module. So I designed this base to hide a smart module (the one I use is a Tuya one - https://www.aliexpress.com/item/1005001273143481.html ). With the Tuya app…
Print without support Category: DIY
Needed a place to put my USB Optical Drive for when I rip my media and found the ESRack Template, added in the dimensions for the Verbaitim 43888 optical drive I have and now I've got a cleanly rack mounted optical drive. Just note that…
Gas tank spacers for the 1992 Ducati 851 and all 1993+ 888 motorcycles. These spacers allow the gas tank to be raised either 3.5 or 4mm, to clear the frame mounting bracket for an Ohlins steering damper. Spacers are placed between the…
Barricade stop that replaces original sling ring mount, designed for WE-Tech 888C (HK416C).
Build Toby's core the same way as he described in his model 2 files. Uses Toby's some of toby's model 2 files that are needed for the Grifco 888 so credit to him Glue or weld the shroud piece together. If you want you can put some hot…
Printer Brand: i3 MK4 Rafts: No Supports: Enabled Layer Height: 0.2mm Nozzle Diameter: 0.4mm Material: PETG
Gas tank spacers for the 1992 Ducati 851 and all 1993+ 888 motorcycles. These spacers allow the gas tank to be raised either 3.5 or 4mm, to clear the frame mounting bracket for an Ohlins steering damper. Spacers are placed between the…
5-position hot air rework nozzle holder designed with the Aoyue 888A rework station in mind, although it may fit other models. The Aoyue rework stations are made by SRA Soldering Products with a 21.5mm inner diameter on the nozzles so any…
After printing the plain FX-888(D) rugged case (which is awesome, btw), I started aching to put a logo on it!!! You can print this separately or mesh boolean join this into JP's ( https://www.printables.com/@JP_156503 ) awesome design. I…
Needed a place to put my USB Optical Drive for when I rip my media and found the ESRack Template, added in the dimensions for the Verbaitim 43888 optical drive I have and now I've got a cleanly rack mounted optical drive. Just note that…
This model is compatible with the lego system.
The sponges I used to buy expand by about 10% on the plan. The right template for me is about 90% of the original size. You can customize your template using the OpenSCAD script available to download.
There is no cover for fan on web-888 device. To avoid damage by fingers I have create fan cover, which could be glue up. It could be transparent double side sticker or other glue. For tape usage small portion in the inner part of cover…
FDM friendly version of the Mercedes hood emblem, optimized for 0.4mm nozzles. Will give even better results when printed using 0.2 or 0.25mm nozzle and 0.1mm layer height In three versions: Fully blank emblem plate and insert in one…
The pot metal handle for the fence rail on my Shop Fox W1888 broke. I scanned the curved piece and recreated it in my own style. I printed mine with PC/Carbon Fiber from Amazon: https://amzn.to/4hDKVyZ Suggest you use 5 Walls, and at…
The BF-888S “walkie talkie” radio came with an AC only charging base. This model is for constructing a DIY charger using DC voltage as the supply. This charger can charge a battery by itself or while installed on the radio. The electrical…
it does need some tweaks but try it and make suggestions on what needs to be fixed.
I designed a direct-fit funnel for Volkswagen EA888 Gen 3 engines. It is designed to be used without removing the engine cover , to make oil changes that much easier. If printing in PLA, I do not recommend using in a hot engine bay. PLA…
This is a charging stand for a BF-888S radio and/or BL-1 battery that uses a USB charging cord for power. It is configured for use with a 26x17 mm TP4056 Charging Module w/ Micro USB port similar to these:…
PRUSA RC3 Face Shield, with height reduced to 15mm and holes spaced using 888 standard (80-80-80). Therefore this does NOT fit the standard PRUSA visor, which is 80-60-80. However this is suitable for those wanting to cut visors using a…
This is a 3D printed alternative to the metal locking pin. Print lying down @ 0.2mm or less layer height for a perfect pin. Use accompanying lock button. Add spring and glue button on. I printed this in PLA and it has been fine,…
You will need 2 - 2.5mm x 8mm screws to attach these. The factory ones are too short.
Baofeng 888s Holder for use of a vertical 20mm rail with access to the mic/speaker ports, originally designed an ATV Buggy
