Liczymy pasujące modele…
The LSI 9300-16i HBA is a wonderful choice for DIY NAS enthusiasts, but outside of data center with frigid climate control and numerous fans pushing air over its heatsink, it tends to get warm. This shroud clips around the LSI 9300-16i's…
This is an older design. Please consider also checking out this one created by @ briancmoses : https://www.printables.com/model/1046107-lsi-9300-16i-hba-cooling-fan-shroud This HBA runs pretty hot and I wanted to mount a fan to it instead…
English: This is a hook for the channel rail of a Thule Omnistor 9200/9300 awning. It features a a bracket for some fairy lights. I use this fairy lights with the hook Camplight:…
Fan shroud to mount an Noctua NF-A4x10 to an LSI 9300-8i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9300-8i, but this…
I created this model to help cool my LSI 9300-16i SAS HBA, which runs very hot when not in a server chassis with lots of static pressure. I printed this in PETG, but you can probably get away with PLA+ if you have enough airflow. Printed…
Had the problem that it isn't easy to find a good place for a label on the front of a 48-port C9300 switches with 8-port uplink module, if you don't want to cover LEDs etc. This is a draft for a label plate held by the rarely used USB…
Mounts a Delta BFB04512HHA-DV52 45x10mm blower fan to the heatsink of an LSI SAS9300-8e card. Will work with other BFB04512 variants, but the BFB04512HHA-DV52 is the one you want if you care about PWM control. Requires two M3x10 hex…
A few replacement parts for DEERC 300e / 9300e RC 1:18 vehicles. Will likely also work with Sandy Land vehicles, as they share many of the same underpinnings. If/when other parts break, if I design a fix, I will continue to add to this…
LSI 9300-8i Fujitsu model remix of original. Below is link for onshape if you need to make more edits. Need supports as per the original.…
This is a PCIe Bracket for mounting an LSI SAS 9300-8e in a Full Height PCIe slot. I found it worked really well printing it with the little notch required for the SAS connector facing up an using supports under the bracket and inside of…
I had issues with the LSI 9200-8e card that I bought, so I ended up buying a new LSI 9300-8e. I modified the original design to accommodate for the different SAS connectors
LSI 9300-8i Fan Support Simple cooling bracket designed for the LSI/INSPUR 9300-8i card to improve airflow in NAS and server builds. Compatible with a 40 × 40 × 20 mm (4020) fan, commonly available online (Aliexpress). This model is a…
Remixed from @hurzhurz_201403's awesome implementation of a Catalyst 9300 Label Plate. Size: 60mm x 8mm
I found trying to install a fan was a bit too tedious especially when the wiring can get jammed so easily between the fan's frame and the shroud. So the fan's mounting points were moved from the front to the back and the shroud that…
A single-slot cooling solution for the LSI SAS9300-8e HBA by attaching a Delta BSB0512LAA01 blower fan that's readily available on AliExpress and other online platforms. Friction fit. Inspired by LSI SAS9300-8e blower fan bracket . Use a…
Made it myself cuz coundt find it anywhere Print without Raft, use more than 80% fill and use supports :)
Die beiden Teile werden zusammengebaut und mit den beiden Schrauben, mit denen der Haltern an der Wand befestigt wird, zusammengehalten. Es wird kein zusätzlichen Montagematerial benötigt. Der Halter wurde mit 2 Stück Spanplattenschrauben…
I did not find any faceplates for my specific sas card for the Lenovo tiny PC's. LSI SAS9300-8e is my card. for anyone who needs it. bracket bolts up from the bottom of the card using the same small screws that the original bracket had.…
I had problems with my HBA failing causing data corruption and other kind of issues. Ruled out that too high temps caused instability and eventually failure. So I designed this fan shroud for LSI 9300-8E 8-port 12Gb/s SATA+SAS pci-e3.0…
An adjusted version to fit a 10mm thick 80mm fan
A fan shroud that will fit a 50x50x11 (mm) heat sink, like on an Inspur LSI 9300 8i. You'll need a Noctua 40x10 fan, although any other 40x10 might fit, just make sure the cables are on the right side. I've added the source file in…
