Liczymy pasujące modele…
Print a piece of Space History Size : 200mm (diameter) x 2.2mm (66% of the real size) The bottom is a reproduction of the Side 1 of the Voyager Golden Record . The top is a reproduction of the record cover diagram that contains the disc…
Gandalf from the Rankin and Bass version of the Hobbit.
Bilbo from the Rankin and Bass version of the Hobbit.
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2 (Recommended)
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Zundapp KS50 50cc scale 1:15 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA NB! The rims do not require support
Version 1.1 - The rocket storage is now separate from the center card box. NOW UPDATED TO INCLUDE THE EAR CANDY EXPANSION! SEE BELOW FOR DETAILS.…
Created in Autodesk Maya as my scanner does not work on smaller than 100mm*100mm*100mm
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Toyota LandCruiser FJ40 1977 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Zundapp CS50 yaer 1977 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
can be printed with any material Is a recreation of the DS 977 siren Rotor RPM. : 2880
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Iconic Movie Villains - Star Wars - Darth Vader - 1977
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Space 1999 - Commander John Koenig (Martin Landau) - 1975-1977 3D printable model.
Travel back to 1977 with the King of the Monsters! This is a detailed fan-art tribute to the iconic Shogun Warriors Godzilla , the massive plastic toy that defined a generation of kaiju fans. Unlike movie-accurate models, this sculpt…
Space 1999 - Dr. Helena Russell (Barbara Bain) - 1975-1977 3D printable model.
The Professionals - Ford Capri Mk III 3.0 S (1978) - 1977-1983 3D printable model.
update 241004 JL I think I cut the roofline a little to low in version 07 version 10 I think is a better and I improved the wheels. this is the villain from the 1977 movie “the car” the movie isn't particularly good, but the car itself…
Fantasy Island - Mr. Roarke (Ricardo Montalbán) & Tattoo (Hervé Villechaize) - 1977-1984 3D printable model.
This model is compatible with the lego system.
Recording Artists - Sex Pistols - Paul Cook, Sid Vicious, John Lydon &Steve Jones - 1977 3D printable model.
Three's Company - Jack, Chrissy & Janet - 1977-1984 3D printable model.
Lou Grant - Herb Herbert - 1977-1982
Lou Grant - Lou Himself - 1977-1982
Iconic Movie Moments - Annie Hall - The Balcony Date - 1977
The Sentinel - Allison Parker (Cristina Raines) - 1977 3D printable model.
I designed larger feet because the feet of the original step always press into the floor if the ground is too soft. I hope someone can use it... I printed it with the settings in the 3mf. Works great. A little superglue when assembling…
Lou Grant - Art Donovan - 1977-1982
Lou Grant - Billie Newman McCovey - 1977-1982
Lou Grant - Charles Hume - 1977j-1982
Lou Grant - Joe Rossi - 1977-1982
The Sentinel - Father Halliran (John Carradine) - 1977 3D printable model.
Fahrgestell für Playmobil Odelfass 1977. Es fehlen Teile wie z.b. der Werkzeugkasten! Falls ihr den Rahmen daher noch ändert wollt habe ich euch die Fusion 360 Datei in den Anhang gelegt. Viel Spaß damit
Lou Grant - Margaret Pynchon - 1977-1982
Pontiac Firebird Trans Am 1977
Made just to make a point on reddit: https://www.reddit.com/r/3Dprinting/comments/gsfs6v/i_will_3d_model_any_race_track_for_you/ Downloaded the SVG file from Wikipedia , cleaned the file up using Inkscape and finalized the 3D model on…
Evolution of a Logo: Star Wars. In 1977 George Lucas requested some slight modification to Suzy Rice's logo design and Gary Kurtz directed Joe Johnston to finalized what has become the most recognizable Star Wars logo. This has been the…
Hello Clamps adapter for Parkside PSS 1 D2. Thanks to JimmyFLASH_CZE ( https://www.thingiverse.com/thing:6123639 ) to give me the idea, I made a new clamps holders design splitted in to halfs, useful to assembly the Werckmann Clamps,…
muscle wagon
Comic book character created by Vaughn Bodē
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
This is a set of printables for successfully mounting 1977 Tail Lights in the 1980 - 1982 Corvette rear bumper. Print the hole template using draft mode out of PLA. Use the small hole to secure the template to the car, so it doesn't move…
Best printed with the bottom side down, using tree support just for the teeth.
Remix of https://www.thingiverse.com/thing:2439779. Left hand Grip for RB 67 Remixed to work with the larger and heaver RB67. Printed in PETG CF with 6 walls and 50% cubic infill
This is the toolbox cover for a 1977 Yamaha XS400D. Other years & models of the XS400 might work.
The same year Star Wars was unleashed in movie theaters, TV brought us "Quark." It was the story of a space garbage scow, captained by a man who wanted more, a hermaphrodite engineer named Gene/Jean, the ship's doctor was a sentient plant…
I use a piece of a large rivet clipping (~1.5" long) as a key for the wheel to lock into. Further edits in the future may be possible. 11.2" shaft diameter 5/8" water tubing fitment V1 is the original V2 is the same, but slightly reduced…
About I bought a fancy metering rod carb for my bike, but it wasnt working right. The stock one worked mostly fine other than the choke no longer working. I dont know why keihin used plastic choke arms and failed to make a replacement…
Printing This model is almost 1:1, with some adjustments made for printability. I have made other variants to adapt larger carbs, but I figured I would share this one. Originally wanted to make a mold and cast them from urethane, but I…
A good friend asked me to help fix a broken clip. I traced the outlines in Fusion 360 using a scaled photo. The teeth could be improved, but they get the job done!
Cusrtom mounting bracket for diode
Custom mount for aftermarket start solenoid
Custom cribbage peg replacement for Club Cribbagemaster board Model 1977 Designed in Solidworks
Toyota LandCruiser FJ40 1977 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Travel back to 1977 with the King of the Monsters! This is a detailed fan-art tribute to the iconic Shogun Warriors Godzilla , the massive plastic toy that defined a generation of kaiju fans. Unlike movie-accurate models, this sculpt…
About I bought a fancy metering rod carb for my bike, but it wasnt working right. The stock one worked mostly fine other than the choke no longer working. I dont know why keihin used plastic choke arms and failed to make a replacement…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
A good friend asked me to help fix a broken clip. I traced the outlines in Fusion 360 using a scaled photo. The teeth could be improved, but they get the job done!
A simple replacement for the hazard warning button in GM Trucks from 1977-94. It has been tested specifically with the 1987 GM Sierra 2500, but will likely work with other GM trucks from the listed time period, based on a brief bit of…
Remix of https://www.thingiverse.com/thing:2439779. Left hand Grip for RB 67 Remixed to work with the larger and heaver RB67. Printed in PETG CF with 6 walls and 50% cubic infill
Saturday Night Fever - Tony Manero on the Floor - 1977 3D printable model.
Zundapp KS50 50cc scale 1:15 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA NB! The rims do not require support
Zundapp CS50 yaer 1977 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
Just a coin tray for 70s volvo 200 models. since buying one off ebay is now 100$… you can just print it.
- Mitsubishi Outlander interior part 6977A273ZZ - Printing of ABS is preferred. - Acabamento Parafuso Trilho Banco 6977A27
Spider-Man 1977 Coaster, those eyes! V1 has color layer changes and the eyes protrude so it is easier to print. V2 has the eyes inset if you want to use a AMS system. Happy printing!
🔧 Tired of water or critters getting into your smuggler’s box? The factory drain holes in El Caminos let water splash in from below while driving over water, leading to rust and water damage —even if you seal the trap door. 🐁 Mice and…
So, I have a friend that has this board game Rock Hard 1977, and he didn't like the cardboard game pieces, so I created these on my own, they are not Exactly the same as the game pieces however they came out pretty well. To Print the two…
I designed this lid to fit my 1977 Honda CG125 as a replacement for the missing factory toolbox lid, it may also fit other period Hondas that feature the same OHV 125 engine bikes that feature the toolbox under the airbox and battery. ive…
Card Holder split in two with dovetail joint for easy printing on small printers.
A simple holder for YATO precision oiler YT-06977, to keep oil from dripping on a table. Intended to be lined with e.g. cardboard, which will soak in the drips. The oiler itself can be handy for 3D printer maintenance.
This model is compatible with the lego system.
Printable 3D model. Dondozo Sushi plate. Pokémon inspiration. STL file.
A toy I grew up playing with finally broke at my parent's house. I decided to use photogrammetry and create a scan of the remains, generate a mesh, then cleaned it up and modeled it in Fusion360. Then 3d printed two halves to make a…
A simple replacement for the hazard warning button in GM Trucks from 1977-94. It has been tested specifically with the 1987 GM Sierra 2500, but will likely work with other GM trucks from the listed time period, based on a brief bit of…
Star Wars - Han Solo - "Trust Me" - 1977 3D printable model.
Smokey & the Bandit - Cledus Snow with Kenworth W900A - 1977 3D printable model.
Fantasy Island - Mr. Roarke (Ricardo Montalbán) & Tattoo (Hervé Villechaize) - 1977-1984 3D printable model.
The Captain and Tennille - Daryl Dragon & Toni Tennille - 1976-1977 3D printable model.
Captain Caveman - Unga Bunga!- 1977-1980 3D printable model.
Star Wars - Hans Solo in Action - 1977 3D printable model.
