P
Printables
Anker Soundcore Space A80 eartip connector replacement
Tested at 0.06mm, works like a charm
Wyniki wyszukiwania: a80
Liczymy pasujące modele…
P
Printables
Awesomatix A800R /MMX Body stopper
Awesomatix body Stopper. Made for A800R but fits also MMX and others. Distance between holes is 28mm
P
Printables
Awesomatix a800mmx/fx caster tool for hudy setup v1.0
There are many caster tools out there for the Awesomatic a800mmx/fx but none of them are compatible with the hudy setup v1, the original hudy setup tool. Because they are in front of the setup tool, while for the original hudy setup, they…
P
Printables
Textima8014 spare part
Textima 8014 sewing machine repair part. The bolt sockets from the original part must be transferred and heat-fitted into place and some modification need because of the spring.
P
Printables
Laminator gear replacement part (LMA806)
A laminator with a busted drive gear for the lower drum is fixed with the help of 3d printing. Another piece saved from being scrapped! FreeCAD source file included for further customization. PETG 0.2 layer height, 25% infill, 5…
P
Printables
Awesomatix A800R 30mm Fan Duct/Mount
This is a model to mount the 1UP fan on Awesomatix A800Rs. The local hobby shop was out of other fans when I built mine up and the 1UP fan seemed like a nice clean and tidy fan, not to mention they seem to make an extensive selection of…
P
Printables
Samsung Galaxy A80 a805 case
Originally published here: Samsung Galaxy A80 a805 case by tato_713 - Thingiverse Thanks to Anthony Corner , who helped me testing this case. Since this phone is a little tricky with the camera, I made the cases compatible with rigid…
P
Printables
Kessil A80 Light Shade
A request from a friend. The light pops right in. should be printed in Petg or something more tolerant than petg. source file included for remixes
P
Printables
Wall corner brackets for TP Link TL-WA801ND and TL-WA1201
Additional notes: The brackets can be attached to the wall using double sided tape. Both brackets include an Ethernet cable guide on the back.
P
Printables
KRUPS EA80 Grinder Gear
I have printed this gear using Prusament PC Blend and it seems to work fine. This being my first run with PC, it bent slightly at the base, but it didn't cause any trouble. I've had to apply force to get the gear in, but the original part…
P
Printables
KRUPS EA8010 (EA80*) coffee container cover
Simple, well-fitted cover replacement for EA80* KRUPS coffee machines series. If you e.g. lost your original coffee container cover, use this one. Printed in PLA+ with supports, 0.4 nozzle, 0.2 layer height. I used mounting position…
P
Printables
project_16_balconera80_V2
For everyone who has taken the hydroponic path on the "dark side" (no control over soil) – or simply needs a light-blocking cover to prevent algae growth. This is Version 2 of the system and consists of 5 parts : Parts 1, 2, and 5: Print…
P
Printables
JZA80 MKIV Supra Cupholder and Center Console Tray
Center console setup works really well, but cable retention could be improved. I use an Anker Powerline II with my headunit. Could also improve airflow to avoid overheating in the summer. The can holder works fine for 12oz and 16oz cans,…
P
Printables
Bumper XsV RaCing for Awesomatix A700 & A800
High-Performance Bumper for Awesomatix A700 & A800 This meticulously engineered bumper is the result of extensive research conducted in 2022, with a primary focus on enhancing the performance, weight distribution, and overall balance of…
P
Printables
Socket Reinforcement for Saswell SEA802
The mount on this model is weak and it keeps falling out. This insert helps reinforce it so that it stays attached. I used the amazing model by Teketa as a reference to recreate it in FreeCAD, adjusted the model to fit my TRV, and…
P
Printables
Anker Soundcore Space A80 eartip connector replacement
Tested at 0.06mm, works like a charm
P
Printables
Aiyima A80 amplifyser mounting bracket sim racing playseat sensation pro
universal mounting bracket for aiyima a80 with bezel
P
Printables
Fan mount for Awesomatix A800MMX RC car closer version
motor cooling fan mount for Awesomatix A800MMX
P
Printables
A80 cell phone holder
it works for other devices. Support for samsung galaxy A80 cell phone, with charging port and charger support. I made it in PLA, 0.20 mm NORMAL, with 30% fill, but feel free to make it to your liking.
P
Printables
Autel Adas IA800 Protection Cover
Protection cover for the camera of Autel ADAS IA800. Only need to put a line of masking tape inside to make a little bit of friction, so when you move your rack, the cover don't fall.
P
Printables
Dayton Audio DMA80-8 3" satellite speaker
I made a Enclosure/Satellite speaker for Dayton Audio DMA80-8 3" Dual Magnet Aluminum Cone Full-Range Driver with Dayton Audio DMA80-PR 3" DMA Series Passive Radiator. The enclosure volume is made for vented to the spec. The walls is 8mm…
P
Printables
L86A2 LSW Vertical Grip / Rear Pistol Grip SA80
etsy.me/3n6BXUo bit.ly/42oqoYP L86A2 LSW Vertical Grip / Rear Pistol Grip SA80 by saxonite - Thingiverse Please leave like if you download this model, it goes a long way in motivating me to continue making polymer furniture & replicas, I…
P
Printables
Butt Plate / Stock L85 / SA80
etsy.me/3n6BXUo bit.ly/42oqoYP Butt Plate / Stock L85 / SA80 by saxonite - Thingiverse Please leave like if you download this model, it goes a long way in motivating me to continue making polymer furniture & replicas, I appreciate it!…
P
Printables
SA80 / L85A2 Pistol Grip
etsy.me/3n6BXUo bit.ly/42oqoYP SA80 / L86A2 Pistol Grip by saxonite - Thingiverse Please leave like if you download this model, it goes a long way in motivating me to continue making polymer furniture & replicas, I appreciate it! Replica…
P
Printables
Onkyo A8017 Lamp Holder
A light burnt out in my Onkyo amplifier. In my case - the “Super Servo” one. The original part was flexible, so after many iterations I have landed on this particular design which can be printed in PLA and is just flexible enough. It…
P
Printables
Kessil A80 Refugium Frame, 8020 Bracket
Mounts a Kessil A80 between overhead 8020 20 series, 9" spacing. M5 hole. Use a heat tolerant filament, ASA or ABS preferred.
P
Printables
JZA80 Supra Tokyo Night Hueforge
Original art Created by us, we then Created this using Hueforge, we want to share our love for cars and hope you enjoy this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA…
P
Printables
Estuche dashcam 70mai A800/S
Estuche de goma para la dashcam 70mai. Al hacerlo en filamento flexible te aseguras de que no se ralla. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Infill: 80 Filament: Recreus Filaflex…
P
Printables
Spacer VA80 to VA10 adapter
Spacer ring allows the use of a VA80 adapter as a VA10. Print with 0.1mm layer height.
P
Printables
HexiBox Series: Tang Band W5-1138SMF / Dayton Audio DMA80-8 2.1 Backpack Speaker
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
P
Printables
Fan mount for Awesomatix A800MMX RC car UPDATE DESIGNS
motor cooling fan mount for Awesomatix A800MMX various designs slightly adjustable in height, mounting with or without double-sided adhesive tape printing: 0.4 nozzle, 0.2mm layer height 4 walls, 6 bottom and top layers, infill 99%, speed…
P
Printables
Tweak stick for Awesomatix A800MMX RC car
My version of a tweak stick for Awesomatix A800MMX the parts fit on a rod with 10 mm outer diameter I had some aluminum tubes with 10 mm outer and 8.2 mm inner diameter lying around simple version: use o-rings to hold the printed blocks…
P
Printables
project_16_balconera80
For all those who have taken a hydroponic path on the dark side (soil cannot be controlled) or as a cover against water. It consists of 5 parts. Part 1,2,3,5 no support Part 4 with support (organic) Prints part 1,2,5 with the top side on…
P
Printables
SA80 Bayonet Sheath/Scabbard
This is a very basic sheath I designed for my SA80 bayonet. During house moves, I lost my RAF issued scabbard/sheath. As it's now decorative given I left the RAF some years ago, I decided to make a very basic scabbard to keep it safe.…
P
Printables
JDM Series II Clock Spacers (JZA80)
When modifying a USDM Toyota Supra LHD dash panel to accept a JDM Series II clock, the hole on the dash panel is modified, and usually the original mounts is cut off, and relocated. However, the original mounts can come up short, so I've…