Liczymy pasujące modele…
I little model of a ragdoll dude, taken from Thingiverse I recommend 110-150% size If you want to print it with multiple colors, you can use the 3mf and print each part individually, attaching the joints halfway through the print.
I have made this model because i have not found another model like it YOU NEED SUPPORTS FOR THIS TO WORK
🎮 Roblox Noob Ragdoll Figure – Print-In-Place (NO AMS) 🤖 Meet the Roblox Noob Ragdoll Figure — a fun, flexible print-in-place model inspired by the classic noob character. This figure prints fully assembled, straight from the printer,…
1:42 Scale German tank destroyer from WW2. There's no moving parts, it's just one solid part. It should print in the orientation I have already sliced it in for maximum strength of the gun barrel. I won't be uploading the Panther tank,…
simple print but make sure you have a raft on if you tend to have bad bed adhesion, other than that you're good. Have fun!
The “Articulated Ragdoll Figure” Fast print time Low usage of filament Perfect gift for any audience
SUPPORT REQUIRED
a simple ragdoll of huggy wuggy. you also will need to add supports for this model.
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Calling this done. I guess if you make a rolling model you have to motorize it and add an UNO to control it. So I took the Panther chassis I did and modified it to hold an UNO, a motor controller and some 12v motors. Then modified the…
This is a modified version of https://www.thingiverse.com/thing:4801663 by Denes. I made the mustache and eyes. You can download the other ragdoll bot in the pictures here 👉…
Updated as did not lay properly on the bed Example printed at 150%
This is a tweaked version of “print in place ragdoll bot" by Denes https://www.thingiverse.com/thing:4801663 Make sure to follow us so you get notified when we upload a new model!
The iPhone USB-C DiagDock is a 3D-printable alternative to Apple's USB-C diagnostic dock, designed for technicians who need a cost-effective solution for pre- and post-repair testing. It features a bottom compartment for added weight…
adding an adhesive before printing is recommended. printing with no supports is highly recommended.
Motivation I recently purchased a P2 Laser Cutter and AC Infinity 6” Inline Duct Fan intending to attach 4” ducting to the inlet side. But the outlet of the P2 was too small for 4” ducting. Additionally, the weak stock internal fan would…
this was my first ragdoll huggy wuggy so it ain't that good
This is my first model i remixed it on thingiverse thanks to denes who made Print-In-Place RagdollBot by Denes – Thingiverse https://www.thingiverse.com/thing:4801663 its very cool and now its on Printables oh and dont forget this model…
I'm learning sketchup so I thought it would be fun to add a little hat to this ragdoll model I found. Enjoy i guess, I don't know what else to say.
this jagkommando knife PROP, is printed in pieces for better printing. there is a screw that screws into the blade and the handle to hold it together. i also threaded the butt to screw into the handle. and the handle is hollow so you can…
This is a ragdoll like Orion drift figure
I decided to turn this unknown women saint into Saint Mary Magdaline. Generally, statues of saints hold or wear symbolic items that help represent those saints. In the case of this model the right hand was missing. It was probably holding…
Fun Ragdoll to play with (or destroy ;) Quick and easy Print. !!!Warning, will pop a hole in your bike tire if you try to ride over it!!!
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- The CF Cat – Ragdoll features a full, soft outline…
ragdoll bot compatibile con dummy 13
Simple Logo of the 1. FC Magdeburg, i will slice this into single printable parts later. Category: Signs & Logos
This is a print in place ragdoll bot that I made with moving joints. Because this is a print in place, do not use supports. Happy printing! Make sure to follow us so you get notified when we upload a new model! Find us on Instagram here…
Created with photogrammetry (freeware: VisualSFM + Cloudcompare + Blender + Meshmixer) When you are interested in Lowest Budget 3D Scanning, you might also like: https://www.thingiverse.com/thing:2755968 Check out my other collections of…
Feeling DiskInserted? ~Based on the artwork by Zhecon for Magdalena Bay's album Imaginal Disk ~ This model consists is two halves, a nearly symmetrical top and bottom, which "twist lock" together allowing for a CD to be held between them.…
I suggest printing with supports for better joints.
Jagdpanzer IV Tank Destroyer Model Scale: 1:72 The Jagdpanzer IV was a German tank destroyer used during World War II, known for its low profile, sloped armor, and powerful anti-tank gun. Built for defensive and ambush combat, it became…
remix of Microtech Jagdkommando by Nikola Svilar: https://grabcad.com/library/microtech-jagdkommando-2 all i did was make it so that the blade and handle can be printed in separate pieces and the screwed together with a screw. the rest…
A better, more articulated version of the first version. Added abdomen articulation to simulate spine For up and coming versions I will Make it look less square Add feet and wrist joints Add Male & Female versions!!! (The current versions…
Card Tray for Another Glorious Day in the Corp by Gale Force 9 miniatures war game. Playing this game requires 6 characters, so a bit of organization really goes a long way to keeping the table tidy. 6 will stack well for storage. Holds…
as always use brim!!!!!!!!!!!!!!!! if you print the one with headphones use supports.
Hey guys i made a new ragdoll its linkeys brother im making a seris of this and now on tinkercad as well its public and on thingiverse too i hope you like it SUPPORTS NEEDED
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Latest design in my Bookmark Tanks Collection! Are you ready for the HUNT, for best the bookmark. Introducing JAGDPANTHER! Jagdpanther bookmark for those thrilling war books of yours! (works with other books too...) Print instructions…
English: Emblem of SC Magdeburg. The individual color layers are designed so that the emblem can be easily scaled in the slicer. At 100% scaling, the emblem length or width is 10 cm based on the longer side. Also, take a look at my…
Using Magda j's empty puzzle platform, I created a labyrinth for my cat's food. She loves it and struggles quite a lot to eat from it, as it's juuust the right size for her not to be able to grab food inside of it with her mouth… She uses…
This model holds the Aliens from the boardgame Aliens- Another Glorious Day in The Corps in place. Be sure to keep the tails of the aliens up from the ground when gluing them together. It replaces the alien holders from this really cool…
Dies ist das Wappen des 1.FC Magdeburg welches ich zu einen Untersetzer für Tassen/Gläser erstellt habe. Da ich es selbst noch nicht gedruckt habe, vorerst, diese Fotos. Alle Farben sind änderbar!
The Magdeburg Unicorn was an assembly of mismatched fossils written about by the mayor of Magdeburg in the 17th century. I primarily based my model on Keenan Taylor's reconstruction . If you want to help me keep making free models or to…
This is a robot that i designed in blender. It is very fun to play with and fidget with. It is basically just a little ragdoll robot with a cute little face!
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
The Jagdpanzer E 100 is a rolling nightmare of steel and fire, an unstoppable executioner built to crush anything foolish enough to stand before it. Its colossal armor shrugs off incoming shells like rain, while its monstrous gun delivers…
A ragdoll that can be printed in place. I will be building off of this idea, and making other versions. If you have ideas of what can be fixed or improved, tell me! I will always accept criticism, constructive or not!
Played a ton of old school halo growing up and I always loved the ragdoll physics and wanted to get a chuckle out of my printer
the fallout 3 power armor as a ragdoll. print with supports. Pls like and post make!!! Good luck
Everybody loves to dock :) This is an easy to print magnetically retained magazine holster system built around a Tek Lok style connector. This is sized for Glock 9mm full sized (17, 15, 10) magazines. Everything is built around M4 screws.…
Ich habe eine kleine Plakette für Jäger erstellt. Die Plakette ist Multifarben, also kann mit der MMU gedruckt werden. Im Slicer sollten die Farben ersichtlich sein und können beliebig geändert werden. Die Anbringung ist ein M4 Loch, da…
Pretty simple cylindrical stowage bin for german panzer Panther Ausf.G or Jagdpanther, 1/16 scale. Designed based on Panzer tracts books. Ideal for conversions or schratch building: heng long, tamiya, torro, taigen, etc. Nice accessory…
This is definitely getting closer to what I’d consider “real” project documentation. I’d also document the file structure since there are multiple body and mounting variants. Someone should be able to open the ZIP and immediately know…
Only 4 grams!!! Print with supports for best results. Pls like my models post makes and good luck!!! printed with 15% infill in pla and with supports. My tinkercad account https://www.tinkercad.com/dashboard/designs/all
for this kit to work you will need and clasic automag rail that had been pump milled aswell as a pump milled body, you will need a wave spring for the valve. To assemble the kit you will need some ¼-20x3-½ bolts and modify the head so…
print with PET-G or PLA with around 80% sparse infill also if you make a youtube video on this model I made please link the model in the description and comment a link to the video in the makes & comments p.s: i will feature ALL youtube…
The Jagdpanther was a German tank destroyer used during World War II, first entering service in 1944. It was built on the Panther tank chassis and was armed with a powerful 88 mm Pak 43/3 anti-tank gun. The Jagdpanther had sloped armor,…
Mary Magdaline (Netsuke Form) Holding Alibaster Jar.
throw him off a 10 story house balcony *note you have to make him wayyyyy bigger. my first try it was done in 12 mins and didn't even ragdoll
Německý těžký stíhač tanků, který vznikl na podvozku německého tanku PzKpfw IV.
This is a ragdoll fidget Inspired by my Floppy Guy series on MakerWorld. You will need to break it in to loosen it up.
Motivation Last year, I designed, printed, and installed an external exhaust system for my xTool P2 laser cutter and AC Infinity 6” Inline Duct Fan . Since then, I converted my Prusa MK4S+ to a Core One (enclosed chamber with exhaust),…
This is Linkeys dad new to the ragdoll family new to having a job and he does not need support
Classic Automag Rail for reference purposes only. Not suitable for 3D printing as the part should be made from 6061-T6 Aluminum for strength. This model is supplied to make derivative model creation easier by measuring and testing…
Print with supports. Pls like and post makes. Good luck
this is the very first model I ever made so it may mess up
Capture the sweet nature of a Ragdoll cat with this 3D printable STL model. This gentle and affectionate feline is perfect for adding a touch of calm and loving presence to your displays, shelves, or miniature pet collections. No AI.…
Klein model van een Duitse jagdtiger. Erg snel te printen. Support is nodig, maar erg simpel te verwijderen. Veel plezier ermee! Voor montage, lijm het kanon op de hull. Lijm de tracks op de hull. Klaar! Tip: het kan slim zijn uitstekende…
This is a very simple change that allows a string to be added so this tank can be a keychain or bag tag. It is also scaled down, a lot. I printed it with a 0.2mm nozzle and 0.08 mm resolution and it works, but it is very delicate, I…
Docking V2 baby :) This is an easy to print magnetically retained magazine holster system built around a Tek Lok style connector. This is sized for Glock 9mm full sized (17, 15, 10) magazines and another model with Beretta 92 magazines.…
Let the girs have fun with comeing hair and giving dresses to Daisy-Printable Ragdoll Remix! the all new ragdoll in the ragdoll seris Plus its Larrys and Linkeys sister NEEDS SUPPORT OKAY Go on files the file is exactly like the photo…
OVERVIEW Docking for the big boys. MagDock PCC is a modular, magnetically retained magazine holster system designed for Glock-pattern PCC magazines. It is built around the Tek-Mount Mini interface and was originally developed for my MLGBS…
This is a modified version of the grips in the link below. My Air Gun Designs Automag has a small peg up top of the grip frame so I put holes on the insides of the grips. I believe these grips will fit the first versions of AutoCockers…
Das Logo ist eine eingetragene Marke des 1. FC Magdeburg
Bring the timeless beauty of classical antiquity to your space with this stunning 3D printable statue that captures the grace and power of ancient Roman artistry. This meticulously detailed STL model showcases a perfectly proportioned…
print with PET-G or PLA with around 80% sparse infill also if you make a youtube video on this model I made please link the model in the description and comment a link to the video in the makes & comments p.s: i will feature ALL youtube…
check the original models its the rest of the FAMILY and Linkey i hope you like mom :D
Another sign for the toilet. This time the driven hunt. Category: Bathroom
This die is made up of 6 pieces held together by a total of 24 neodymium magnets, 3mm in diameter, 1mm thick. The magnets hold the pieces together perfectly fine for rolling but if the die is dropped from a height of a foot or more, it…
Sweet & Sharp Sophistication Imagine the world's fluffiest cat, famous for its big size and floppiness, transformed into a work of modern art! That is exactly what this 3D-printed Ragdoll figurine achieves. Using a low-poly, geometric…
🐾 Welcome to Animal World 3D Cute, fun, and creative animal-inspired 3D models for everyone. All models are made to be easy to enjoy, free to download, and perfect for makers, collectors, kids, animal lovers, and anyone who wants to bring…
This Raggy Jr – Mini Ragdoll Dummy Toy & Keychain is a fun articulated figure with loose joints that make it go completely limp when you pick it up or throw it, just like a real ragdoll! Its compact size also makes it perfect as a…
Meshmixer supports are included on one STL. An unsupported version is included. It is very tight to get into the frame. I use a needle file to trim the corners and edges just enough to snap the trigger inside the trigger guard. It doesn't…
Normal and Bloxy cola version Supports: yes Works with any nozzle and any material. Any size works too.
An evil robot that you can fidget with.
Print with supports. Pls like and post makes. Good luck!!!
OVERVIEW MagDockPlate is a collection of modular mounting plates designed to adapt magazine pouches, holsters, speedloader carriers, and other belt-mounted accessories to full-size Tek-Lok compatible attachments. Rather than creating a…
![Articulated Ragdoll Figure | [<20g]](https://media.printables.com/media/prints/e18f3abe-f546-49bb-908f-80e88bf2c3e7/images/12041383_e1f44aec-4722-4f76-8d6f-676207a21865_310a9625-6970-4339-8cb3-bde3c353872e/img_20260213_211700.jpg)
