Liczymy pasujące modele…
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when attached…
DISCLAIMER: Since this is still just plastic don't expect for it to be able to hold some heavy attachments, it is meant for just some light and small things that won't be under heavy force. I myself have tested this part for a grip and it…
!!!This is not a real gun!!! Hello, Today I have for you Airsoft AK 47, AK 74 front sight. It fits perfectly in its place. The appearance is authentic. Requires M3 bolt. Modeled after the Cyma AK 041 template and photos from the internet.…
Źródło oznaczyło ten model jako treść 18+.
Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…
Do you like Managed Democracy? Well now you can spread it all over your local airsoft field! When I posted the original Backhammer kit for the PLR-16, people brought up its similarity to the Liberator from Helldivers, and suggested that I…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
Grenade Launcher Airsoft Used screw: 3x25 for body 3X 3x15 for pistol grip 2X 3x10 for RIS rails 4X Used spring: D/d = 8/0.8 mm L=10mm or similar 3D printing settings Plate1: 0,2 mm layer 8 walls 30% infill no supports Plate 2: same as…
This is a stackable Airsoft Suppressor Baffle that I made for Surefire LLC replica suppressor. Print as many as you need and just stack them. Each one is 16.6mm high, and they have 1.6mm overlap, so a stack will be N*15mm+1.6mm high,…
6 different sized airsoft grip. Use 5x30 mm hexbolt. Printed with 0,6 mm nozzle. 3-4 walls. 0,24 layer height. 20% infill. Printed in PLA + 870 3DLAC. Very strong. You can also use fussy skin to give it some grip. I used 0.3mm fuzzy skin…
Make working Lexington automatic pistol from Cyberpunk 2077 out of Action Army AAP01! This print replaces original upper receiver and outer barrel and reuses most of the screws. Might require little bit of sanding but in my case was not…
Why Just a simple picatinny mount that you can use to mount anything you like. Use it as a starting point for your own designs....or just print it and glue something to it. Maybe you've always wanted to mount your wisdom tooth to your…
Źródło oznaczyło ten model jako treść 18+.
Functional 3d printable airsoft ak body kit with folding stock. Uses standard airsoft ak internals. Includes stl and step files. Takes about 1kg of material to print. I desingned the model with 0.25 mm tolerances between each part.…
The Manticore is (to my knowledge) the first shell-ejecting blowback 40mm launcher in the world. It uses HPA to cycle short 40mm grenades (shells shorter than 90mm), and fires in semi-auto. I recommend printing all of the parts for this…
The Libra Classic break action shotgun, in 40mm form! Compatible with all standard 40mm airsoft grenade shells. All build instructions and files are below, including .f3d and .obj files for that sweet, sweet remix culture. In addition to…
Dies ist ein Waffen Ständer für mein Airsoft Gewehr. Damit lässt sich die Waffe wunderbar horizontal präsentieren. Das Magazin ist völlig neu designed, inspiriert habe ich mich von den Magpull und ETS Magazinen. Zum verbinden des Magazins…
Use 100% infill, mine was printed with Prusament PLA and it can tank shots from a Tokyo Marui GBB pistol with no problems (300ish FPS). You can make it thicker (source file included) or stick something on the front to absorb the impact if…
100% Accurate Frame Model (for airsoft)
Brief History of the Karambit: The karambit was originally an agricultural implement designed to rake roots, gather threshing and plant rice in most of island Southeast Asia. It's a smaller variant of the Southeast Asian sickles. It still…
If you read this, please leave a ❤! An adapter I made to I can more easily reload my airsoft pistol mags. Printed in PETG. The short version sticks out less but requires a little extra finesse with gloves on. Edit 11/29/2023 V2:…
The Principle Suppressors reduce the sound of the explosion by trapping and slowing down excess gases. With airsoft silencers, the most important thing is to reduce the high frequencies, because they are the main culprit for revealing the…
All the bearings use the standard 6mm Airsoft BBs. Ranging from 20mm, up to 200 mm (outer diameter), in 2 and 5 millimeter steps, and are 7.1mm thick . I don't even know what you could do with a 200mm bearing, but if you do, send us a…
Airsoft speedloader m4/ar15 You need: 1 m3x20mm 6 m3x10mm 6 m3x10-20mm 1 m6x20 1 m6mm nut 1 half pen spring Printed with: 0.4mm nozzle, 3 Walls, 15% infill and 0.16 layer height. Message me if the tolerances is too tight for your printer.
The objective of this project was not to out perform the commercially available spring grenades, let alone the gas ones. It was mainly to test the concept and make a working airsoft spring grenade that doesn't use trap doors. That said,…
This silencer is based on the Osprey 45k and was designed to be used on my 1911 R32 and holstered on my Swiss Arms Adapt-X, so the dimensions are definetly not accurate in relation to the RS one. Dimensions: 23 x 35.5 x 150mm The baffle…
Printing Instructions Print without supports and at 100% infill. If using PrusaSlicer, I recommend disabling “Thick bridges” and enabling “Detect bridging perimeters”. If you have assembly issues with the holes being too small, you can…
Reuploaded with most recent fixes and edits. Thingiverse and discord have all the old files if you want them. *PAAR stands for Printable Airsoft Assault Rifle duh This is a set of files to get a body of an M4 looking thing designed to be…
The front is fixed with one M3x15 screw and nut. (the front also have another two screws just for alignment), the fixation in the picatinny rail is made with a M3x30 screw and nut. Print with suport (touching buildplate).
*** 16/08/2023 added another version of the Blade.*** Hi there, I designed this knife to be used in airsoft. Therefore, for your own safety and especially the safety of others, print the blade only out of flexible materials like TPU. Not…
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Sako style handguard airsoft ar-15. The one that is about/is introduced to service in Finnish(13" long) and Swedish(9.5" long) armies. Use as is or with upper, (green and brown in pictures)…
Hydra mount Remodeled to be stronged when 3dprinted and easier to print, made for airsoft Uses m5 nuts and bolts(at least 30mm)
Angled airsoft grip. Use 2 5x30 mm hexbolt. Printed with 0,6 mm nozzle. 3-4 walls. 0,24 layer height. 20% infill. Printed in PLA + 870 3DLAC. No need for support.
UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…
Original file from MeowCha on GrabCad: FN FAL | 3D CAD Model Library | GrabCAD The OG file was just one big stl file. I separated all the files on this one and exported each of the parts. I also included an f3d file of the original file…
Other requirements: 1. Gearbox (would be ideal but could also be used in a different way) 2. cylinder with no holes. 3. arduino or other fire control unit . (will work without it, just not efficiently at all.) 4. Air valve (I used one off…
For best durability print in TPU, and for more fun in PLA ;)
10X10cm target holder with a bullet recovery system (if you are an acurate shooter of course ;-)) porte-cible 10x10cm avec un système de récupération des billes (si vous êtes bon tireur, bien sûr ;-) ) Print instructions Category: Sport &…
Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…
I made this project way back in 2016 and it hasn't been updated since originally posted on Thingiverse. Hello, everyone! First of all: English is not my native language. And second: This is a work in progress thing. This took me a lot of…
Disclaimer : This design is intended for use with Airsoft Guns ONLY and NOT for real firearms. Thread Specification : M12x1, 8.5mm long; I use it on my M1911 pistol, although I'm not sure if they all have the same thread. Modular Design :…
Silenziatore modulare che può fare sia da silenziatore vero e proprio, sia da prolunga canna... Esternamente è 35mm di ø, ed è lungo 80mm. Il vano interno è 30mm di ø ed è lungo 70mm. Adatto per essere inserito in repliche con handguard…
Taser Dummy with changeable cartridges. i used m5x35 screws and with m5x10x7 Plastc inserts Print Settings Printer Brand: Creality Printer: Ender 3 V2 Supports: Yes Resolution: 0.28 Infill: 10% @ 3 shell, 5 top/bottom Filament: Das…
This is a simple pistol holder. I tested it with a Tokyo Marui Glock, a CZ P09 from ASG, a ICS BLE Alpha and a HK 45 Tokyo Marui. Do not use it with a High capa. I'll post another version later. Do not hesitate to list other compatible…
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
Low Profile Mount for Airsoft tactical helmet that can holds the camera from below. Printed with 0.20mm layer height using PLA without supports. Wall line count set to 2, with top and bottom layers at 3 using a Zig Zag pattern, 25% infill…
Remix (what I changed) I added two slightly different target patterns to each of the targets, as to allow for more precise aiming and a deeper, more refined practice. The pattern has a height of -0.5mm, as to make the pattern easily…
It's a 0.15" hole, meant for a screw bushing I also added just the rail, [so that people could add the railing to their existing dust covers. It is a 0.15" hole with a 0.25"(width)x0.1"(depth) bore head] and just the dust cover
A Triangle Grip and Screws for M4 Style Rifles that use the M-Lock System Works really well on my Novritsch SSR4 DONT TIGHTEN THE SCREWS TOO MUCH OTHERWISE IT WILL CRACK! My Print Settings: Layerheight: 0,25 Material: PLA Brand: Prusament…
Update: added an optional taller version by request Why I have T1-style red dot that sits very low on the rails of my airsoft replica's. This print raises your sight by ~32mm which is perfect if you're using goggles/helmet/mesh covers.…
This is a replica of a real steel suppressor, that could house the Acetech or Xortech Mini Airsoft-Tracerunit. There is a long an short version with a crown or flat end. Keep in mind, the crown version is better to be printed on a resin…
My attempt was to make this M79 model realistic as possible so you could used it for Vietnam war events or as just a nice pice to your collection. Model has realistic manufacturer markings and imitation of the cocking mechanism under the…
Holster for AEP CYMA Glock CM.030 Mount for Molle or 50mm belt Used material screw: - M4x14 DIN 7985 - M4x8 DIN 7985 - 2x NUT M4 DIN 934 - 2x M3x10 DIN 913 - spring from pen diameter 4mm I recomend to use ziptie to belt mount like on…
Why I wanted to mount my actioncam upside-down under my airsoft pistol, using metric nuts and bolts and a bit of plastic. This is the result. Features Mounts on your everyday RIS/Picatinny 21mm rail Uses metric nuts and bolts Used the…
Airsoft Adapter from M12 CCW to M14 CCW
Silenziatore modulare studiato per essere un silenziatore effettivo con 7 dissipatori di suono. Rende il suono emesso di fronte alla replica pesantemente otturato, trasformando gli acuti e i suoni alti in bassi. soprattutto è grosso e…
This should be reusable, I would recommend PETG but pla has worked for me, just not for very many tries.
Airsoft QLS plates compatible with Safariland or Cytac/Amomax via adapter The male and female plates were remixed from (https://www.thingiverse.com/thing:3827837). Print settings: 25% infill 6 walls @ 0.4 or 4 walls @ 0.6 PLA or PETG 0.2…
Splitted design for easy modyfication in Slicer I set the blue one to print at 5 mm/s speed, to make the overhangs looks good But I also include not splitted version --- Commercial Use --- By purchasing this design on Cults , you support…
This is an airsoft model only, designed for an AAP-01 extending its original front part allowing a 200mm inner barrel. 2026.08.20 - Mini version extended 8mm to better fit with 130mm stock barrel Added Mid version for barrels of 160mm…
I did not like the look of commercial available Tracers so i designed my own. Housing for the Begadi Tracer Unit (00821110SET). 14 mm CCW Thread. For the best fit and look print with Resin, FDM works as well. If you need other mounting…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and i think every…
Hello there, I've designed this silencer so i can keep stock SRS .300 and .338 muzzle brake on (24mm cw thread), even if i have additional long 14ccw suppressor for my SRS A2. Don't mind the quality shown on images, my printer is kinda…
A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.
I tried to improve koobysnacks77( https://www.thingiverse.com/thing:2335510) already awesome stock design. The sling mounting option on the sides cant be done after the real steel version on the AEG version because of the battery chamber,…
There's two versions, "OTB" (Over The Barrel) has the thread around the middle of the silencer and the normal version has the thread at the base. Silencer dimensions: 157mm x 35mm OTB: The barrel hole is 15mm and the thread starts 70mm in…
I never uploaded this model because I edited it quite badly but it fits.
Universal PUNCH BUTTON & CO2 Cylinder Opener/Tightener for Umarex T4E HDR/TR50, HDR/TR68, HDP/TP50 & HDS/TS68 - Cal.50 & Cal.68 airguns. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 0.15mm…
I share with you the mini roni kit that I made for my glock cyma electrica for airsoft, you can make the barrel of the gun in 3D but I recommend putting a metal barrel, the gun was painted satin black. It may be necessary to heat in some…
Swinging target for Nerf / Airsoft / Orbeez guns. All pieces snap together, so you shouldn't need any glue to assemble. There are two options for the target, hexagonal or circular. The legs for the stand contain print-in-place bearings to…
INTRODUCTION I couldn't find a nice curved (and free) MP5 magazine for my Mosquito so I created my own. Feel free to try it out and complain if you have issues. STEP files now available. The model is based on two existing models: - BB…
Upload of my project from thingiverse since thingiverse has become trash! Preface Optic Fibre sight designed to friction fit onto a picatinny rail as I think it looks better without bolt holes to bolt it on. Should fit on most picatinny…
Speedplate for green gas powered glocks.
Just a must have speedloader filling tool. couldn't find one over here, so designed it. Have Fun! and keep playing. Category: Sport & Outdoors
Airsoft Muzzle device for Glock Models with a Threaded Barrel. Attaches via M14x1 LH threads. This Print consists of two parts. A threaded insert which goes onto the threaded portion of the outer barrel and the comp itself which simply…
hallo:) zuerst den stab mit barrel in den lauf schieben dann die abdeckung drauf und die abdeckung festschrauben
I've created a compensator for airsoft pistols inspired by some real designs. On an airsoft pistol, it serves purely as a decoration. Pictured on my WE G19. It's modeled with the standard 14mm twist and works best with a short adaptor…
It will need: 0.3" dia. x 2" length spring 0.11"dia. x 0.3" length spring 3x small screws for a 0.1" dia. hole, 0.3" length Note: I have added STEP.files so that the connection holes can be adjusted for individual printer tolerances. I…
8 shotgun shells (Extra Ammo) to your Molle vest or plate carrier. Printed on a P1P using Esun Olive PLA+ 0.16 Optimal Profile Layer Height - 0.16 First Layer - 0.2 Walls - 2 15% Infill 220 C Nozzle 55 C Bed
ATTENTION: In order to see if this file works for your 3d printer. Please print the Rail_Test.stl file first. If you downloaded the old files, you need to Scale them down to 10% I've designed this Carbine Kit for the SSX23. The SSX23…
I made an adapter for a supressor with 14mm CCW thread and 12mm CCW internal barrel thread for airsoft replicas of the M1911 type such as the Tokyo Marui / Army Armament / Aps brands. There is also a thread protector for the 14 CCW / 12…
---------------- the parts list and the documentation to get started can be found here the link to the new manuals can be found here https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing ---------------…
Made to work with Ludex m4 and m16 speed loader, also works with Oden M12. Should work with other sidewinder clones. Ludex m4 mag speed loader Oden Sidewinder m4 mag speed loader I designed this to have an easier and faster way to load my…
This model is for the airsoft version of the SIG Sauer P320 M17 from VFC. It's not for a real gun. Part you need to print: Body 1x Right side 1x Left side 1x Trigger 1x Endcap front (v1 or v2 ) 1x Endcap back ( v1 or v2) 1x Mag release…
An adapter to mount common 14mmCCW parts to an airsoft MP9. Tested to fit on KWA.
updated and added a few files 5/22/24 Read differences section for more info. single piece receiver printed flat on base, tree supports for release slot and trigger area. Can do tree supports for the larger round holes if printer isn't…
Remixed liqdfire's silencer and added 14mm CCW threads to screw onto my 1911 TAC. Current version threads are a little loose but if you tighten it all the way its fits fine. Print Settings Printer: Anet A8 Rafts: No Supports: No…
# Airsoft only # Airsoft Hi-Capa 5.1 fixed outer barrel, 2 versions: Normal version Threaded version Tested with TM stock and Airsoft Masterpiece HopUp chamber.
Hello everyone! Please download the .zip folder and read all of the enclosed documentation, this will set you up for success on your build! Check out the Reddit thread!…
Easy to print and correct replica of M18 style grenade. My model comes with two style of bodies idk which one was more used in the war. Also comes with templates for painting. They are easy to make use mine as referenc for your own.
Disclaimer : This design is intended for use with Airsoft Guns ONLY and NOT for real firearms. Thread Specification : M12x1, 8.5mm long; I use it on my M1911 pistol, although I'm not sure if they all have the same thread. Modular Design :…
I added a rounded version as the first one was a bit to pointy and sharp for training/mock purposes. It is 0.25" holes for the sheath. I suggest grommets, but you can use whatever you want. Works amazing, a tad tight for the real sheath,…
This is a redesigned kit from AKHTO-DESIGNS bullpup ar15 kit https://cults3d.com/en/3d-model/game/ar15-bullpup-kit-beta-gbbr-version-highrise that brings in more customizability to the overall appearance. Most bullpup kits only support…
8x M3x16 screws 4X M3x30 2x m3 Square Nuts (can be replaced with hex nuts) 8x M3 Hex Nuts 3X 6X20 springs The springs are used for the trigger plunger and the picatinny lock an M3X16 screw goes into the head of the trigger plunger to give…
Good morning, Welcome to my profile, full of models and miniatures :-) I have something for you today on Airsoft. Silencers of various variants. From 50-200mm length. On one side it is equipped with a M14x1 left-hand thread (CCW).…
