Liczymy pasujące modele…
A Remix of McGybeer's classic articulated lizard, with wider clearances so it can be printed smaller (my Ender 3 can consistently handle it at 0.55 scale with no issues). The ankles are also improved because the original looked a little…
The original model has a description of the designer's goals - well achieved! But there is no need to do anything fancy to make this model print - slice it and print it. No supports, no brim (on my Prusa i3S Mk3 with PLA). If you happen…
The model is printed in two identical parts that snaps together. In my tests the first fit is a bit tight, but the next ones should go better. In the event of the snap dots get damaged with use, I guess a dot of superglue and a little…
Scale Guide: Yellow: 100% Blue: 150% Red: 200% Mici's thigh frame and thigh armor link: https://www.printables.com/model/729164-dummy-13-mini-me-aka-dummy-10-v03-beta/files
Bosch tankless water heater button
I wasn't a fan of the original eccentric for two reasons: the slight finger depression meant purposeful downward force was needed to rotate the eccentric, and the combination of the shallow finger depression and the cutouts on the…
I have cankles. Do you have cankles? GREAT! Then this remix is for you! Options for deep heel, hole/hook/flat top and shortie leg. Pick and choose what you want or print all?! Thats the beauty of choice. Modular aspect for small print…
R2-D2 has a small, vaguely L shaped detail greeble on the front and back of his ankles. This greeble has a small tab projecting above it, and on most versions of the R2-D2 prop the main part of the greeble is unfinished aluminium (or…
Made originally for my dad, but decided to post it here for everyone to use. If you are wondering why the cup is bigger than the punch, its so while both are in place it can form to the shape of the boot for a better fit. PRINT WITH 70% -…
A pair of stiletto heeled shoes for carbon 13 female model. (considering that it is such a drama attaching the ankle joint.... I have made extra ones with the joint already fixed. check the stl files....) I did not make them too pointy…
A tiny tweak to the size of a frame piece. I wanted a snugger ankle because I found my Dummies' feet were falling off after only a few days of fiddling around with standing poses. Now much less likely to lose a foot. Note 1 : if it's hard…
Replacing another piece that was lost to time, or a dog. Category: Toy & Game Accessories
Warning - Death From The Ankle Down, sign Category: Signs & Logos
Zur platzsparenden Aufbewahrung des Geräts, 2 Flaschen und der Plättchen (Das Fach ist von der Größe für die Etisso-Plättchen dimensioniert)
This shaper will keep your boot ankles tidy. To use, tighten the laces and tongue around the shaper. The hollow design will allow the shoe to dry. This particular model was designed for EU size 44 - 45 shoes.
Modified my version of my previous anklet. This has the groves on it so you can pound it into the leather to make is easier to make a rolled anklet.
If you want to display your R-series astrodroid in the 2-leg “walking” or “standing” mode, you have two choices. First, find a small person to wear the droid as a costume. This, of course, is what George Lucas did in 1976, and without…
A locking bondage cuff, sized and shaped for ankles. The cuff is held closed by a sliding face plate, that locks in place. You will need to supply some rare Earth magnets, 8 x 3 mm, to make the key for unlocking. (Unless you never plan to…
Falconry Anklet Template for a male Harris Hawk. This is wider on the tarsus and can be slitted or rolled depending on your preference. I was thinking of making this with raised edges so it could be placed on the leather and pressed in to…
If you have the Gigapower Swoop, then you probably know what this is for. I printed it in PETG with the thin “washer” like section removed so that it prints flat on the bed, and it works great. I left the model as-is in case you want to…
A special socket, with a ¼ inch drive, for removing and reinstalling the cap for the cold water inlet screen on a Rheem tankless water heater. The cold water inlet screen on a tankless water heater should be removed and cleaned as part of…
The joints I designed are in three parts that come together under pressure to form one piece. For each section of the leg and arm you should print the ball, joint, and arm or leg part. So in total you will print 8 of each piece (24 piece…
Changelog – 2024-04-27 – Updated the model to v4 _______________________________ – German – Diesen 3D Druck habe ich entworfen, um eine "IKEA VATHULT" Schrankleuchte direkt an der Wand befestigen zu können. Damit kann die Leute z.B. über…
Warning - Death From The Ankle Down, sign Category: Signs & Logos
This is a Tinkercad remix of Soozafone’s "Dummy 13" articulated figure, designed to allow independent ankle coloring without requiring an AMS unit . This remix includes a modified shin piece and a new ankle attachment , both carefully…
I had the idea for this design after working at a medical company here in Germany producing amazing Prosthetics made from expensive materials. I was born and lived in South Africa and am well aware of the situation in a country were such…
A trio of cute little monsters that we call ankle biters for your tabletop fantasy games. nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social…
Uses 25 mm width straps, turns into a fixed blade basically.
The original dummy 13 lower shin/ankle piece had the flat spot of the ball on the side which made its grip worse since that was where the socket connected to it. I rotated it 90 degrees and now its on the back, so it has better friction.…
See images for details. We have found this to very useful and have been using clinically for the past 6 months. If you can't print this yourself, you can order from printing service on Etsy.…
a simple to print furniture leg, can be used for a wardrobe, chest of drawers, corner sofa, sofa. dimensions width 7cm height 4.5 cm depth 4cm screw hole 4mm I suggest filling 5% lines. with similar filling, sometimes even smaller,…
essay / Ankle attachment massage gun essay massage gun pinofit / this essay is still available in its orginal form / but it feels greatthe attachment has already been sufficiently tested and is very comfortable printed at 0,15 (15%…
100% infill and Flexfill TPU 98A required. Shore-A hardness are quiet same, little bit harder. If you slow down the speed, you can get harder part.
This is a hinge for an Ankle Foot Orthosis(AFO).
I broke one of the rubber ankle loops of my kids overall so I made a new one. Should be quite universal. The 3mf file has the settings I used. Most importantly add soo many perimeters that the thinner section will be filled to maximize…
Leg/ankle/bicep band for Mi Band 9 Active. Highly recommended to print it in TPU. You need a 5cm wide elastic band, I recommend it to be at least 40cm long. (Like this )
(Added for Repairs contest) (Not sure if it fits the contest, but anyway…) This is an attempt to repair… MYSELF! sort of. After breaking my toe I could only wear flipflops, no shoes, but having my thumb taped to the next finger, the…
A support for foot that turns on side when walking.
If you have accidentally stepped on your kid's rope jump ball's ankle loop and crushed the fragile plastic it came with, look no further. Here is the replacement piece.
It's the Ramshankle, and you know dang well, it's made out of old vehicles that we couldn't sell! Vehicle for the Topplegangers, from the Cheat Commandoes. Built on Tinkercad
Der Halter wurde speziell für das originale Apple Watch Ladekabel entworfen und kann mit 20 mm breitem Montageklebeband nahezu überall befestigt werden. Die Montage ist simpel: Löcher aufbohren – Verwende einen 3-mm-Bohrer, um die…
Es gibt nichts zu beachten, ledigtlich slicen und losdrucken, dann einfach auf die gewünschte Oberfläche aufkleben
Ankle for modified S3003 Servo, used for robot project. Second cover has been mounted on opposite side of S3003 i.o. to obtain dual guidance for more stability. Designed with with FreeCAD, source file included Category: Robotics
On this model of a Navien Hot Water Heater, there is next to nowhere to bundle any power cords. I refused to let them just hang and look sloppy on the wall (considering the investment). Wanted to make this look a little more professional.…
Looking at the cheap uncle alie crap and not wanting a ikea like organiser i designed this one. Innerspace is 213 mm walls are 3 mm. infill 20% printed with esun pla (used 2 types as you can see on the pictures).
Kids played a bit too rough and destroyed the ring of their skip ball game. Couldn't find one one on any of the sites so a few minutes in CAD and we have a quick and dirty replacement for their skipping toy. Printed in PLA because its…
Kleiner Handgriff zum Ankleben/Aufkleben für verschiedene Anwendungszwecke. :-)
Um ein Antennenkabel in einem alten Gebäude im Fensterausschnitt zu befestigen habe ich diesen klebbaren Halter designt . Wurde in PETG gedruckt und dann mit Acryl an die Wand geklebt
3D-printed replacement ankle ladder pods for the Nidecker Magic snowboard binding. Fits the Roam Mini Shred kids' binding and possibly other Nidecker models using the same ladder system. Recreated by carefully measuring the original part…
Spring bands that hold your trouser legs tight round the ankle so they don't catch in the bike chain or get oily, then pop off when you arrive. Wide and comfortable, with flared ends to slip on, and a shallow recess round the outside for…
Rack Foot Cradle Holds the foot at a set angle against a rack so the ankle stays where you put it while you work further up the chain. TARGET AREA: foot / ankle positioning SPECS - Size: 116 x 70 x 93 mm - Material: 213.3 cm3 - Solid-core…
I have cankles. Do you have cankles? GREAT! Then this remix is for you! Options for deep heel, hole/hook/flat top and shortie leg. Pick and choose what you want or print all?! Thats the beauty of choice. Modular aspect for small print…
Full description This wearable gait tracker is built around an ESP32 controller paired with a 6-axis IMU to capture motion and orientation data in real time. Designed as a lightweight leg-mounted device, it integrates a 450mAh…
Kleiner Handgriff zum Ankleben/Aufkleben für verschiedene Anwendungszwecke. :-)
Drop in Replacement part for the air intake cover of Navien NR-NP tankless water heaters
This one-of-a-kind bondage device locks around the foot, forcing the wearer to stay on their toes. Walking requires an awkward tiptoe gait, and standing still is nearly impossible without losing balance. This is a rework of my earlier…
ich fahre gerne Fingerskateboard. und die Rampen sind sehr teuer. darum mache ich sie selber
Stokjes om op te rijgen liggend printen en achteraf in het popje duwen. Geen lijm nodig
Full description This wearable gait tracker is built around an ESP32 controller paired with a 6-axis IMU to capture motion and orientation data in real time. Designed as a lightweight leg-mounted device, it integrates a 450mAh…
Custom Steam Deck dock integrated with the Anker 341 7-in-1 hub . Base size is 17.0x10.5 mm (6.7x4.0 in). I am including the original Fusion 360 file as well. Includes 10 locations for rubber feet (6x2 mm) to prevent scratches and…
![[V4: FULL RELEASE:] Dummy 13 coloured ankles: AMS-free](https://media.printables.com/media/prints/1222351/images/9166691_7b6b9354-4811-4d98-a3e2-8539526248dc_84c555bc-f4f9-4e46-afc2-7f2dc204688e/screenshot-2025-03-09-at-31357-pm.png)
