Liczymy pasujące modele…
I printed it in pla, seems to be holding up pretty good so far. Not sure what size the fenders are, but they are about 5.4 cm wide at the widest point. (I have 700x35c tires, and could probably go bigger).
Another Token for Supermarket Trolleys is a simple and practical 3D model designed to replace the coin normally required to unlock shopping carts. Compact and easy to print, the token can be kept on your pocket, in your car or in a…
These are mounts to use on Josh-3D's Eurorack case if you print the “Angled 2 Unit Stand” I printed this to fit my system, which the BSP fits with very well. Main case 46 HP, 2 side cases 36HP, dual case stand Angled 2 unit Stand. BSP…
This is a mount that you can use to mount your Meshatstic antenna on the outside and the mobile Meshtastic node on the inside of your car to keep the node as close as possible to the antenna. You can use 6in SMA Male to Female connectors…
Get your Beatstep to the height and at the angle you like! :-) Height and angle are parameters in the FreeCAD's spreadsheet section. Contains openings for gluing in rubber feet to avoid sliding on the desk. Provided STL file will raise by…
Introducing the Catstack Collection! A series of charming, stackable cat figures in various sizes. Ranging from a tiny, keycap-sized design to a larger, hand-sized model, each figure is perfect for display, collection, or as a unique…
Deutsch/German: Ersatzteil für einen Milchaufschäumer. Der pin der in der Mitte der Aufschäumspirale ist verloren gegangen und deshalb gibt es jetzt dieses Ersatzteil dafür. Englisch/English: Spare part for a milk frother. The pin in the…
Držák na filtr pro Goatstory coldbrew. Při designu nikdo nemyslel na to, že držet filtr deset minut než přes něj člověk nacedí 800 gramů vody. Jednička je o fous větší, takže filtr je zapuštěn a dvojka je pro odkap po dokončení.
This is a Stand for the Arturia Beatstep Pro. You can use it in two ways
I try to mount my bicycle rear lights as high up as possible. All of my battery powered bicycle rear lights are optimized to be mounted right below the saddle on the seat post - the ideal position. Unfortunately in my case this space is…
The inside is channel is chamfered so it can be printed without supports. I printed mine at 0.1mm and it fits perfectly. A bit tighter than the official knobs. If you need to adjust the tolerance for the potentiometer you can download the…
I printed it in pla, seems to be holding up pretty good so far. Not sure what size the fenders are, but they are about 5.4 cm wide at the widest point. (I have 700x35c tires, and could probably go bigger).
Another Token for Supermarket Trolleys is a simple and practical 3D model designed to replace the coin normally required to unlock shopping carts. Compact and easy to print, the token can be kept on your pocket, in your car or in a…
These are mounts to use on Josh-3D's Eurorack case if you print the “Angled 2 Unit Stand” I printed this to fit my system, which the BSP fits with very well. Main case 46 HP, 2 side cases 36HP, dual case stand Angled 2 unit Stand. BSP…
A new 3D figurine generated by AI, an Astronaut Cat. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
Chester is a 3d-printable add on for your 3d printer, with geared eyes that spin when your extruder moves! The only non-printed part that you need is a small magnet. Required Parts You will need: 1pc backplate 1pc faceplate 1pc nose gear…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lT5ycadWRmA Category: 3D Printing
Stand for Beatstep Pro. You can use the original screws for the stand attachment. PLA. No supports. Layer high: 0.2 Infill: 20% Printer: Ender 3 V2 Print duration: 2h04min x2
Found these at https://facepunch.com/showthread.php?t=1304034&page=6 Also found AnyCad converter with the click of a button turned them straight into .OBJ and .STL's http://www.anycad.net/the-free-3d-model-converter-anycad-exchange3d.html…
If you stand these on the front face these will print without support. If you would like a variation (of angle perhaps) please let me know and I will see what I can do. Thanks for looking!
Reuploaded from BigMrTong from Thinaverse, i Did not make this model, please read below for their description and support their patreon. A late night kitbash for fun. 80% of parts are just remixes, I have linked all these on the Remix…
Original Idea came from Darren Bartley's Khanivore. From Love Death and Robots 1st episode. But I tried to move away from the iconic shapes he created. Miniature is divided on parts for easy printing. 360 degrees video Not yet…
I cut off the tip to avoid hitting the blade when sliding on the whetstone Print Settings Printer Brand: Creality Printer: Ender-3 Neo Rafts: No Supports: No Notes: Print at 150 or 200% for better handling Category: Hand Tools
Best printed with PETG but PLA works well too and I used 0.15mm height. I've included the Fusion360 parameterised model in case the angle of the seatstay needs to be tweaked. To do this, edit the angle of the plane geometery in the third…
Stratstone How to play Stratstone? / Jak hrát Stratstone? EN To win, you’ll need to place four of your coloured stones in a row, when viewed from above.To start the game, layout the board and place two tan coloured stones in a stack on…
This model is my version of enclosure for PhatStats which is “ili9341 TFT PC Performance Monitor Display” designed by Rupert Hirst. You can find details here: https://hackaday.io/project/19018-phatstats-pc-performance-tft-display For my…
This is a stabilizing strut, for attaching the Vélo Orange™ Constructeur Rack on the rear of a bicycle at the seatstay-arm bosses. It is sized for a medium-size Vélo Orange™ Pass Hunter frame (2nd generation, circa 2020). Mounting Two…
I wanted to do a jointed model for the Printables contest. Jace1969 (who has a ton of great SW models) had this ATST model, but it was a solid model so I diced it up and added 14 joints to make it into a posable design. I was trying to…
The new DJI FPV Goggles V2 battery kept falling out of my Fatstraps, so I made a custom battery holder, to keep it in place. All better now. Indention on the sides for finger power on power off touch / feel. I printed in PLA, and will see…
My son loves his blades but I wanted to design my own. I couldn't find any that were print in place unless they were 2 pieces that needed to be screwed together. All my designs are print in place with no supports needed. I generally print…
Batstand is a stand for 3 Batarangs. No supports needed. Printed at 100mm/s. This was a quick and dirty introduction into Fusion 360 for me.
You just need m3 Screws, 25mm and 10mm long and now you can clamp the shaping sensor on the 9mm MK8 nozzle.
Cam Example for my CNC CAM Flatstock Tutorial
My version of a TPU printed DJI battery holder. Designed to fit my 48mm Fatstrap headband. The strap also loosened a lot of times, so I also made some "clips" to keep the band in place. Works perfectly for me. Print in TPU and squeeze the…
This model is for a second generation Trek Checkpoint (2022+). I created a mount for the first generation Checkpoint here https://www.printables.com/model/160973-fender-mount-for-bontrager-flare-r-city-on-trek-ch I printed it with the…
voron 0.2 MiniSB_Motor_Plate with M3 Brass heatstake inserts - short M3x5x4
My beatstep knobs are very sticky now. So.. I made a remix of Arturia Midi Controller Knobs for Auturia beatstep. I adjusted the hole diameter slightly to better fit my beatstep. and I also added a larger knob. Thanks!
