Liczymy pasujące modele…
2020 Aluextrusion Webcam Mount for AUKEY 1080p Webcam Since the Waveshare OV5648 are difficult or expensive to get, I drew a housing for a cheaper variant of a webcam. The AUKEY PC-LM1E 1080p Webcam is a cheap webcam that uses a…
Description: A slidable Webcam Cover for a 1080p Aukey Webcam. The front side is curved so the lense doesn't get scratched. Parameter: 0.2 mm layer height 15 % infill no supports needed
Simple webcam shutter/cap/cover for AUKEY model PC-LM1E
Height Adjustable on the extrusion. No other adjustability as the webcam is adjustable. Should work for similar webcams with a hole or M6 thread like my AUKEY PC-W3 or PC-LM1E Needs one M6 bolt for the webcam, and one M6 Bolt and T-nut…
I made this support for my Aukey 1080p webcam, to monitor the printer via octoprint. If you download or collect any of my designs, please like me!
I created a battery adapter to attach an AUKEY 10000 power bank (PB-N83) to the "HTC Vive Deluxe Audio Strap" or "Quest 2 Elite Strap". This battery allows pass-through charging so I wouldn't need to unplug the cable on the headset and…
This is a simple replacement insert for the Aukey microphone arm. It is far longer than the original to limit the amount of wiggle and to limit the effect wear has on its function.
I needed a way to attach my 20000mah Aukey powerbank to the LabRadar. The LabRadar is notorious for chewing through AA batteries. This print fits the thinnest power bank I could find. Unfortunately, it is no longer available for sale on…
Made a simple Cover for the Aukey Webcam. Simply slides over the lens. Prints without supports
This is a mount/adapter for the Aukey PC-LM1E Webcam, based on the Prusa Mini camera mount here: https://www.printables.com/model/142759-prusa-mini-camera-mount-remixed At first, I generated a holder with the OpenSCAD file, which turned…
Spy Protection Flap for Aukey_PC-LM1E webcam. For mounting the door on the frame, u will need a splint made of a cheap Paperclip. Cut that paperclip intro 2x 6mm straight pieces and insert them vrom both sides. Alternatively, it can also…
I liked CoolHandMike's idea for a webcam cover with a little skull on top but wanted it to be more functional. This version alerts the user when the cover is not closed and he might be watched. I added the Fusion 360 source files so you…
Lanyard loop for the Aukey USB-C to USB-A adapter that's cheap on teh Amazonz. This is press-fit. There's no retention for the part, which I discovered when I dropped one into a hole in the bottom of my car that is inaccessible to any…
This mount allows the attachment of an Aukey PC-W3S (and possibly PC-W3 (not tested!)) webcam to 20xx profiles. Print the ¼" screw with a low layer height. I've used 0.1mm. Don't overtighten the screw mentioned! The cutouts on the sides…
This is a 1515 mount mod for the Webcam Case for a cheap AUKEY 1080p Webcam.
This is a combination of the Rasperry Pi Camera ball joint adapter and the remixed part for the affordable Aukey PC-LM1E
Hi, 2025-01-16 UPDATE v2 I totally reworked the attachments between the parts. Instead of relying on solely 2x2mm diameter cylindric plugs, there's now much more stronger rectangular bounds. You can easily put cyanoacrylate glue in the…
Prints in given orientation without supports. ♥ Post your makes, get Prusameters! ♥
Stand for Aukey 6port usb charger Use double sided tape on the bottom
I reverse engineered the AUKEY Table lamp adapter pattern and put it on the bottom of the moon. The moon now mounts into the AUKEY lamp, and can have multiple RGB colors or bright nesses…. the AUKEY Lamp base is sturdy and supports the…
Holder for Aukey USB 3.0 hub 4 port. You can attach it, using 3 M3 screws
A 2x1 Gridfinity holder for an Aukey PA-D3 charger Created with the help of the awesome Fusion 360 Gridfinity Generator add-on
Holder for Aukey USB charger / Halter für Aukey USB Ladegerät
Case/protection for the Aukey Mini (Type C) Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Filament: Anyone TPU Category: Mobile Phone
HI, I created this very basic webcam mount to hold my cheap Aukey LM1 webcam on top of my printer and monitor my prints. 1-2-3 easy peasy steps: Print Attach the webcam to the mount with zip ties Insert the webcam mount into the slot at…
I really love Aukey Aircore Series 2-In-1 Wireless Charger - it can wirelessly charge mobile phone and AirPods. But there were two problems: iPhone 14 Pro Max with a case didn't fit well - the brim around cameras interfered with the stand…
This is a foot for my mi-u2 aukey condenser mic that allows it to slip under a desk pad and sit a little shorter so that it slips under my monditor. I know this is kind of a niche, but maybe someone else out there has the same need.
Supporto per pantalone/maglietta Trouser/T-shirt support Category: Audio
This open enclosure was designed to securely retain the USB cables in this Aukey PA-T11 charger that is used in our common room to prevent them from being stolen. It is made up of two halfshells that need to be screwed together using…
A webcam mount specifically for the ender 3 with the following X-gantry belt tensioner . And aukey 1080p webcam for 20 bux( i think it might be discontinued ) Requirements ( other then the main printed parts list ). A longer 3MM screw…
Supporto per pantalone/maglietta Trouser/T-shirt support Category: Audio
Aukey LT-SET7 Flashlight Holder wall mount with lens cap. Flashlight fits pointing up or down. Friction "bumps" on the back of holder to minimize movement. Holes for cord to tether cap to holder.
A very simple mount measured for the Aukey LC-A1S Magsafe USB charger, compatible with the standard M4 HSW insert. One M4 bolt (I used the dome version) and nut required. It should be fine for any Magsafe charger, but you'll likely need…
This is an Adapter to mount a Aukey LM1E Camera to the following webcam arm: https://www.printables.com/model/53393-logitech-c270-webcam-holder-and-arm-for-original-p It propably also works with all other cameras that have a M6 thread.…
A simple bracket to mount an Aukey 5-inOne USB Hub. Needs supports to print. Printed in PETG, as the hub does get warm. Just print 2 identical brackets.
This is a holder for the Aukey H19 USB 3.0 powered hub. The holder is intended to be mounted on a Corsair Platform series gaming desk by means of the official Corsair tools, accessories and screws available with the desk. The holder…
"They see me rollin', they hatin'" This is the first sentence I think when I see my aukey car charger rolling every where in the car. So I print a simple support to handle the charge and a simple tool to pull the aukey charger from the…
Windshield mount for the Aukey DR02 dash camera. I printed the one this is remixed from and it was too loose on my camera. This fits much more snugly. Print Settings Printer: Anet A8 Rafts: No Supports: Yes Resolution: .2 Infill: 20-40…
Since I have more than 1 car I designed a new mount to swap the dashcam between cars. Printed at .3 resolution but probably be best at .2 or lower for the mount tab. I printed a test piece in PLA but will use PETG to survive summer car…
Support Pour Hub usb Aukey 4 ports. Trous de fixations intégrés pour le fixer sous un bureau ou ailleurs
I liked the simple snap-in design rather than using magnets, and didn't want to tape or strap in the battery. I've also included the separated mount that I used from MrTB's mount so you can more easily fuse it with other existing battery…
This print replaces the default mount of the aukey webcam with a clean looking mount that can be screwed on to flat surfaces. The camera has to be disassembled to change the insert (webcam_mount_inner.stl). You will also need two M3…
Case for Aukey USB-C Adapter This case holds 2 Aukey USB-C to USB 3.0 (USB-A) adapters. It is designed to have a 6 x 3 mm magnet embedded in each the box and the lid to hold them together. To embed the magnets, I used GCode Simulator to…
One night i could not sleep and came across Peltier cooled Magsafe chargers. My phone was lagging like hell after being charged and giving directions on a long card drive. iPhone 15 Pro Max So i thought i would give it a try. The Aukey…
A simple one piece holder for the Apple watch charger (came with my Watch 7 unsure if how old the charger design is) and the Aukey magsafe disc. I painted on supports for the cable run to be able to print, A hero may be able to bridge it?…
For my 3D printer enclosure, based on an Ikea Lack table, I needed a simple camera mount, that I can mount on the edge of one leg. This simple mount can be screwed on the leg with 4 screws and you can just put your webcam into it. It is…
Soporte AUKEY Receptor Bluetooth 5 para muble cadena HIFI
base for Aukey Eclipse SK-M30, Bluetooth speaker Category: Gadgets
The model is designed to mount a Aukey LM1E webcam to the ender 3 S1 Pro. I have included the standard version of the model and a version where the mounting angle is more intense. The steeper model will point the camera angle further…
j'ai créé ce support pour s'adapter sur ce bras articulé. https://www.prusaprinters.org/fr/prints/3407 pour pouvoir y adapter une Web Cam AUKEY https://www.amazon.fr/gp/product/B0721MKXQ2/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Support for USB Leds bar and Aukey PC-LM3 1080p webcam. 1/4" screw to fix the webcam on the support. USB support have place for M4 hex nut to maintain the usb. This support can be plugged on any printer 20x20 alu profile.
New: v2, which is a lot more solid, doesn't catch on the lens bulge and only slides off sideways. Three versions of a simple webcam cover for the 1080p AUKEY webcam (the wide one, with microphones on each side). The cover slides easily…
Quick-and-dirty replacement for my dashcam. Probably not exact dimensions as the original.
The honeycomb pattern allows for airflow, especially for the deck fan intake, but in my experience the USB-C hub can generate some significant heat as well. I have not tested this thoroughly, use with caution. I would recommend printing…
I wanted to use pretty cheap Aukey webcams for usage with Octoprint, so I used the holders like https://www.prusaprinters.org/prints/58229-yet-another-logitech-c270-mount-for-lack-enclosure and…
I have my A/B motor cables in the underside of the 2020 extrusion so i needed and alternative extrusion side to mount the camera to. This mount allows the cam to be positioned under the gantry but mounted to the front facing side of the…
This simple bracket can be attached to the inside of the enclosure. Putting the nut in the right place can be a bit tricky. --- Diese einfache Halterung kann an der Innenseite des Enclosures befestigt werden. Die Mutter an die richtige…
A simple knob grip for a 32mm knob, specifically designed for the Aukey KM-G17 volume knob. Recommended to be printed in TPU. If you like my work and wish to support me then you can buy me a coffee !
Tested with Swissten's MagSafe but shall work with original MagSafe (similar dimensions). Nozzle 0.8 with layer 0.30 takes 16 minutes to print. Nozzle 0.4 with layer 0.20 takes 21 minutes ti print. Attached original project. Feel free to…
I needed a place to mount the camera in a Voron Switchwire. I originally used a combination of the housing from the 2020 mount for the Aukey Webcam and another piece from a user on discord (shout out to MINUS Stl on the Fizzy's Tech…
Aukey LT-SET7 Flashlight Holder wall mount with lens cap. Flashlight fits pointing up or down. Friction "bumps" on the back of holder to minimize movement. Holes for cord to tether cap to holder.
A very simple mount measured for the Aukey LC-A1S Magsafe USB charger, compatible with the standard M4 HSW insert. One M4 bolt (I used the dome version) and nut required. It should be fine for any Magsafe charger, but you'll likely need…
Print with standard voron settings. Hardware Required 2x Heatset Inserts 2x M3x8mm button head screws to attach top to the heatset inserts in the bottom 2x M3 Hammerhead T-nuts to be inserted into the door 2x M3x8mm screws (button or…
