26 modeli
Simple BTT SFS (Smart Filament Sensor) V2.0 holder for Voron back panel. There is almost 1mm gap between backpanel and holder. Its just for tolerance. You can use 1mm foam tape to fill the gap. STEP file included.
To give back to the P1P community I released my custom backpanel that mounts directly on the stock P1P. No modification is needed and the model is easy to print without supports. Backpanel is orientated correctly when imported into your…
I wanted to prevent the heat in the Enclosure from escaping thru the big slits for the additional mountable fan, as there are really big. I accidently cutted them when I was assembling the Enclosure. So I draw this fan covers and…
USB-C Backpanel for the Super Nintendo - SNES. 1x PDC004-PD (12v)
This mod improves exhaust and noise. All components can be printed with X Plus3. No modification of the printer body is required, but the spool case can no longer be fixed to the back of the printer. All materials are PLA; PETG may be…
The stock ventilation layout is random. To improve upon it you can remove ventilation grids or cut larger openings. Install these gadgets to improve overall airflow for the electronics. All designed to be printed without support -…
I created a nice little Model for the Backplate of the Voron 0. The cooling gaps are made out of plenty voron logos - this should provide some cooler electronics bay for your voron 0. Print the side with the logo on the downside so that…
I wanted my electronics in the back so it also hid the cables and could have easier cable management. There is one folder with just a blank plate, my layout is for a SKR pico, Rpi zero 2w, 40mm cooling fan and uses M5x8mm bolts and then…
I threw all in the mix. Wanted a two piece back panel with the hexagons, also with a bowden inlet. So I combined the Polar-Ted two piece and the bowden part as Maple Leaf Makers designed it. I also wanted the Voron logo like the Pix…
Voron 0.1 Splitted Backpanel with 120x15mm Fan for cooling electronics (RaspberryPi and SKR E3/stepper driver etc) 2.5mm thikness + form tape M3 heatset x4 M3 20mm x4 1mm Formtape 120x15mm fan (12V is most popular for PC use) Apply foam…
Background I have been using an AC Infinity Cloudline Pro S4 fume extractor with my Voron 2.4 for a while and when I finally received my Prusa XL and built my EnXLosure for it I wanted a quick way to swap my duct hose between the…
A 1U PulpLogic style panel to mount the Behringer Neutron back panel PCB in a Eurorack just above the synthesizer itself. UPDATED: mounting pegs adjusted, board ledge moved to allow MIDI jack to clear rails Print Settings Printer: Anet A6…
Voron 0.1 backpanel with honeycomb pattern - multicolor -swap color on layer 3 and 11 Please post a make and leave a rating if you print it. :)
Printed Backpanel for the V0.2 to let the electronic breathe. Print it in one or two colours (as I did) - as you like
This is used as an additional covering behind the backpanel. The original screws can be used.
backpanel with 2x 6010 fan's for the V0.
this is a extremely fine ipad case. stick this panel on your ipad mini6's back so yu can gain a smooth naked ipad.(Sand it to get a better feel, use cloth-based double-sided tape to stick it better)
Prusa enXLosure filter system https://www.printables.com/model/951857-firmware-compatible-air-filtration-system-for-enxl
Backpanel cover for voron v0 with BoxZero mod that adds 8010 fan mounting points to allow some airflow in the electronics bay. This is designed for large corners of BoxZero, for regular corners shorten the top of the acrylic panel by…
this is a simple ipad backpanel for ipad pro 2018 11inch model. The purpose of making this thing is to level the camera bump and prevent the ipad form bending when it is placed flat on the table. Moreover, this panel can strengthen the…
if you want to use threded inserts just drill up the holes a bit. The holes are made to be able to use nuts on backside/inside. Place the filament holder on the rightside panel/extrusions in rear
Do not use this model. See my new version that uses a fan . This one provides too much air resistance to vent effectively. I wanted a right-angle hose adapter for QIDI Tech X-Plus3 BackPanel MOD Kit that I could use with a smaller…
Need Two M6 nuts with a hight of 5mm ore less and the cylinder Headed Screws to attach it.
Customized back panel to a a BTT SKR3EZ and LDO LCP300-24D5 PSU on the back of Rolohaun's Rook MK2 DIY 3d printer. The original panel is designed to have mounting brackets hot glued on but after making brackets for these devices I was…
So after about 4 iterations and 2 days I got this model to reliably connect to the back of the RII RT518 Wireless keyboard. I printed mine on the outside panel face, facing up, with supports only touching baseplate with 20% gyroid infill…
Backsplash? Backpanel? Splash guard? Designed for 3/16” / 5mm glass aquarium canopy. Printed as a 10cm chunk. If you need other sizes / shapes, comment here and let me know.
![Voron 0 [0 | 0.1 | 0.2] Backplate, Backpanel, Electric Cover, Voron Logo cooling](https://media.printables.com/media/prints/617265/images/5271313_3c50591e-ed91-4fae-9481-df61edec90c8_fdde5e74-0044-40cf-9117-7558d14ac99b/img_1688.jpeg)
