Liczymy pasujące modele…
Removed volume guard added PTT lockout 3 styles I found out that the AR-5RM models have a very touchy PTT and I couldn't find a suitable model to print so I modified this one edit 3/26/2026 Added 12 variations Added a cage and a full…
My Baofeng UV-5R knob recently broke, so I decided to make a new one that is more ergonomic and durable. The new version has ribbed surface for better grip, better markings (that could be filled with colored enamel paint ;) ) and far more…
My Baofeng UV-5R knob recently broke, so I decided to make a new one that is more ergonomic and durable. The new version has ribbed surface for better grip, better markings (that could be filled with colored enamel paint ;) ) and far more…
Uses orignal screws. protects volume knob. Print on its side, easy print. PLA ok but PETG is better.
Needed to place attenuator between the Baofeng BF-H6 radio and antenna. Without proper housing it would be easy to break and look bad.
Removed volume guard added PTT lockout 3 styles I found out that the AR-5RM models have a very touchy PTT and I couldn't find a suitable model to print so I modified this one edit 3/26/2026 Added 12 variations Added a cage and a full…
Exoskeleton cover for Baofeng UV-82 and Specna Arms Shortie-82 radios. Covers PTT and side buttons as well as preventing accidental volume/power knob adjustment. Allows the change of batteries without taking the exoskeleton off. Files…
Very simple but working Quadlock adapter for the Baofeng UV-5RM Plus. Replaces the belt clip, works with the default screws.
Updated 20260701 added Baofeng UV-3R folder for PARKSIDE wall added Panel_hook_Insert.STL but have look of such parts also in these link, just in case https://www.thingiverse.com/thing:6266670/files…
To install this you will need to remove the foam handle, which can be done by pushing from one end and pulling from the other. Eventually it will slide off. Remove the 2 rear antenna elements and slide the mount on, then reattach the…
Stand for UV-5R mini or GT-5R mini The clip can secure the device on the stand.
This is the old version of my Baofeng Locknut Tool. I made a new version that is better in every way. Click here for the new model or find it linked as a remix. I don't understand why this model keeps getting more attention than the newer…
I added the stp. file so that you can improve the design, for me its good enough but I know some have higher standards so have at it.
TPU adapter for Baofeng radios can also be printed in other materials Top and bottom adapters
https://cad.onshape.com/documents/70bb708aebb2f03bfd856baf/w/a0110bc7235dde8939ac835b/e/f3e49e0d1b2d5fdb489d0bdb I replaced the original screws with longer M2.5 x 10mm ones.
The new and improved version This tool is designed to turn the locknuts on Baofeng radios. They could've used hexagonal nuts on the radios, but instead they went with something that can't easily be turned by a tool found in the average…
The original battery (model: BL-B) for the Baofeng UV-B5 and UV-B6 dual-band radios have small capacity and is hard to find replacements for, so I made a battery case that holds two 18650 Li-ion cells with protection circuits and/or…
How's this for niche? I built a model of the basic shape of the radio, a Baofeng UV-82HP, and subtracted ( OpenSCAD difference() ) that shape from a cupholder base I created (based on a large fast food cup). Added a slot to hold my cell…
V2 does not need supports. V1 you should print with supports touching build plate.
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro vás velmi šikovný klip na vysílačku Baofeng UV 5R . Jde o variantu pouzitelnou pokud pouzivate vetší baterie na USB C, coz je mnohem praktičtejsi kvuly nabijeni na…
2x4 gridfinity organizer for the Baofeng UV-5G+, UV-5RM, AR-5RM, and BF-F8HP PRO radios *will not work with the antenna on the radio
It fits my radio with enlarged type-c battery OnShape Source Print it with TPU, angled at 45 degree with organic supports, 100% infill
[Newest Antenna design from MiaouCat] THE JUNGLE ANTENNA easy to assemble and extremely versatile. using calculators online you can tailor this to any frequency of your liking and get a nice Vertical GP antenna for a few dollars. the most…
I mount my radio inside the Admin pouch of my chest rig accidental activation of the PTT or changing the volume on accident is annoying, this guard prevents that. Design reuses the mounting holes and screws for the belt clip on the rear.…
Baofeng UV-5R Wall-Mount Printed on Ender 3 v3 SE .2mm layer 15% infill Normal supports Screws: 4mm hole
If you bought an extended battery with a USB-C built-in charger like this one https://www.eshop-yachtmeni.cz/akumulator-pro-baofeng-uv-5r-2800mah-li-ion/ chances are, you are no longer able to mount the belt clip to your Baofeng UV-5R. So…
To standardise all my equipment, I wanted my new Baofeng UV-5RH radio to have a Klickfast stud, so I fired up the 3d printer and printed out the Klickfast for Baofeng UV-5R by Hoopajoo on Thingiverse (…
This model was shared with me as a nice way to hang your Baofeng radios, or more specifically for me, your Meshtastic devices that have Baofeng clips (like those from https://www.printables.com/@AlleyCat) from the dash of your vehicle. I…
Replacement knob for Baofeng UV82 HP Filament: PLA, PETG Layer height: 0,15mm
A company I work with have replaced all their radios with Baofeng BF-888 models, and they wanted to switch over to Klickfast studs to maintain compatability with standard UK ambulance uniforms (which generally come with klickfast docks…
Printed on PETG 0.2mm with 6 wall loops, min. 1mm bottom/top shell and 60% gyroid infill.
After trying multiple encoder knobs for the UV5R, I found this to be a worth replacement, you might too!
Baofeng UV-5R Wall-Mount compatible with Button Guard print Printed on Ender 3 v3 SE .2mm layer 30% infill Supports Screws: 4mm hole
A quick holster for the BTECH / Baofeng UV-PRO. Belt clip locks radio into holster. Access to USB-C charging port on rear.
HT Radio Mount for Chevy Sonic Dash Card Slot Based off the Measurements of the Baofeng AR-5RM Belt Clip With my printer results the belt clip lock onto the bottom edge of the mount and you have to open the clip to remove from the mount (…
This is a protection module for the Baofeng UV-5R. It's intent is to cover the transmit button and volume knobs so it can be put in a bag. (The software keypad lock handles the front buttons). I use this when rock climbing. There is also…
Basically a remix of regsix7's model for a UV-5R cupholder I found on Thingiverse . This will fit the new BAOFENG AR-5RM. Just slide the belt clip into the top and it clicks into place. Should fit most cupholders nicely. Still can work as…
En mi caso lo he impreso en ASA a una altura de capa de 0,2.
Uses orignal screws. protects volume knob. Print on its side, easy print. PLA ok but PETG is better.
The clip is small and easy to use. It should fit many of the similar foldable antennas for radios. To install, simply pinch the antenna and slide the open part of the circular clip onto the antenna, then slide it down into place. To put…
This is a simple, low profile, wall mountable tray designed to hold one BAOFENG CH-5R or AD-CH5R battery charger and a UV-5R radio while charging. A cord slot is provided to secure the power cable and keep it out of the way. The second…
Printed in PETG without supports or brim, using 0.4mm nozzle, 0.2 mm layer height and Prusament PETG profile in PrusaSlicer. Original designs attributed to Ghostguy6 and ddkaufman.
A TPU case for a bit of protection from accidental drops, bangs and so on. // Edit - > 5/30/2024 Changed pictures after re-printing with new parameters listed in the comments for the "TPU case for the UV-S9 Plus"…
Bracket to attach a carabiner to the back of a Baofeng radio (UV-5R and others with same clip bolt pattern). Works with standard or any oversized battery that is flush with back of radio (ie Baofeng BL-5L). Flex version has ring pre-bent…
It isn't great but it works…since I took two stl files there's some polygons that show up when it's printed but it fits in a gridfinity tray and holds 4 batteries. They are even spaced so you can put extended batteries in it.
Just delete the letters on the front to have a more minimalist design
I like wearing my speaker mic over my shoulder but it tends to fall off if i just clip it on the buttons of my shirt, 3d printing to the rescue. Works with both Motorola and Baofeng speaker mics. Used for about a year now at work, haven't…
I made this model for the Baofeng RT-5R, but may fit other radios with mounting holes between 23.2mm - 28.4mm. This model can support upto a 12mm carabiner. Fill Free to remix this model to your heart's content. You also have full…
This is a charging base that you will need if you want to connect your UV-82 radio battery to a smart battery charger, in order to have a better control over charging or to measure battery capacity. It does not support balancing, since…
I needed something to organize my radios and whipped up this in Fusion360. This stand is for: 1 x Baofeng UV-S9 Plus 2 x Baofeng BF-T20 This is a snug fit and despite the photos showing slot for the belt clip, the provided model does NOT…
This mount is designed to securely hold two Baofeng UV-5R walkie-talkies on an IKEA SKADIS pegboard. It attaches to the walkie-talkies via their rear clips, providing a stable and convenient storage solution. The mount may also be…
This custom Baofeng Antenna Holder is designed to store up to 4 antennas per row , offering a neat and secure solution for keeping your antennas organized and within easy reach. Perfectly compatible with the IKEA SKÅDIS pegboard, this…
I designed this Exoskeleton for my Baofeng UV5R radios. It slides over the radio and locks in place with the belt clip screws. You can still operate: - The Battery remove button (if you have small hands like me) - Use the belt clip - Use…
Consist of 2 gridfinity holder to store your baofeng UV-9R plus on the side. Talkie can still move a little bit if you pull the drawer. Be carefull the 2 holders are not the same, one is fitted for the keyboard side (bigger one)
Original loop have sharp edges and useless for me so i made this replacement. Trim with knife if need it.
This model is two parts, a base that contains most of the charging circuit, where the buttons and LEDs are attached, and a frame that retains the transceivers and snaps into the vehicle interior. The 2011 Silverado overhead console is GM…
Scanned my Baofeng UV5R with the Creality Raptor scanner, at .1mm precision. I am including two versions, one that I have left as just the skin (only filled the holes in the skin) one that I made solid in Meshmixer (also repaired and…
Printed clip for hanging a Baofeng UV-9R Plus on a regoular carabiner. Print on a side, PETG is recommended for structural reasons and resistance to UV exposure in the open air. Print Settings Printer brand: FlyingBear Printer: Ghost 5…
I use my Baofeng UV5R radio a lot while bike touring or camping with friends and needed a holster I could use for attaching the radio to my bike's existing GoPro mount. This is that. Please note that this design relies upon printing a…
This is a non-functioning PTT button replacement for the Baofeng UV-5RM series radios so non-licensed users do not have to worry about accidentally transmitting while using the HT. To replace your button, use a small screwdriver or knife…
Baofeng UV-13 Pro Knob protector. Add supports to print Category: Parts
Gigaset A415 is my first DECT phone that I bought for 36c3 5 years ago, I used it on 36c3, cccamp23, 37c3, EMFCamp 2024 and now 38c3. It's not a great DECT phone, it has no phonebook fetching or belt clip, yet it means a bunch to me.…
it does need some tweaks but try it and make suggestions on what needs to be fixed.
wider and higher construction. Better hiding buttons and volume wheel.
This model was printed in PLA+ on a Creality Ender 3 Pro. This model only fits radios with the extended battery. Some of the knurling is worn off and the clip is bent in the photo, this is after a year of regular use. Infill: I used 80%…
Cap for baofeng flexible antena use glue (I used Pattex reapair gel)
This will prevent the volume knob from accidentality being turned while you are carrying your radio.
Most of the replacement batteries sold for the Baofeng Mini (or Baofeng BF-T1) are slightly thicker than the original ones, using the standard cover is not possible anymore. This part is a direct replacement of the original cover to be…
Baofeng UV-5X, FF-12P, UV-S9 PLUS connector lid. There are two models, one for PLA, PETG, ABS, ASA and one for TPU, TPC, TPE.
Rollcage mount for Baofeng handheld Radio. For mounting a handheld radio behind a driver's seat in a racing car, use a helmet speaker and receiver + PTT Mount with m3 nuts and bolts Vertical mount added due to popular request “clamp”…
These big UV25 Baofengs are heavy - especially top heavy. If you have one you know they don't stay in the upright long resting on a desk. Two variations: One with a riser for desktop the other with no riser for throwing in a bag. I put…
I made this to be able to mount my Baofeng UV-5R to my velcro cockpit/flight deck for paramotor/paragliding flying. It's a simple locking holder with maximized surface area for the velcro sticker, but it woud als be ideal as a maximized…
Print at 45 degree angle The battery is open but the radio is not very well protected anyway.
Gridfinity storage for a Baofeng UV-5G radio and its antenna. Gridfinity squares include (4) 0.256x0.094in magnet cutouts on the bottom.
Recommended print settings: Material: PLA/PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: No Print Orientation: Default as modeled
UV-5R Upright Stand (90°) This 3D-printed stand is designed specifically for the Baofeng UV-5R and similar models. It holds the radio perfectly upright at a **90° angle**, keeping it stable, secure, and ready for quick access. Features -…
I have printed and installed this mods on my bao but no field tested yet Supports needed for guard part.
This is a simple way to keep my extended antenna in my rig when not using it. I suggest using PETG, so the parts can take the heat. Category: Electronics
This remix is for the Land Rover LR3 (Discovery 3). The headrest is not easily removable, so I created a version that uses M3 screws and a crossbar. I recommend using PETG, so the part is head tolerant. Mine is almost a year old…
a simple wall mount for the Ikea Skadis pegboard. this mount take up 4 slot holes
Box to two Baofeng uv5r mini and usb cable. You will need six M3x30 screws to assemble it.
shortened version for only one radio, holds on very sturdy, maybe someone will need it too recomend printing at 100% infill, only 6 grams
Simple protective cap for LB-T22 (BL-T22) battery used in Baofeng T22, F22 and apparently some other Baofeng, Retevis etc handheld PMR/FSR radios.
Isolated the extended battery from the rest of the 3D scan. I have attached the blender project I used, feel free to modify it further. Huge thanks to jameslee & PetrolProphet for the base designs.
This wall-mount holder was designed for Baofeng UV-5R (and compatible models). It securely stores 4 batteries and two radios , keeping your gear organized and ready to use. Holds up to 4 batteries side by side Fits the radio with or…
Holder for Baofeng Radio at a 22.5 Degree tilt away from the face so you don't get hit by the antenna
This bracket lets you remove the 4 screws from the underside of your Baofeng dmr1701 charger, and bolt 4x m3 20mm bolts back through to attach the charger through the mounting bracket. I used Sunlu PLA+
