140 modeli
A stand for your olight baton 4. Print in 2 pieces for better quality. I m using PLA 230°C 60°C 40% infill 0.4mm noozle 0.2mm layer height PRINT WITH SUPPORT FOR THE LITTLE PART!
světelný kužel ke svítilně Olight Baton 2.
Tappo per porta bacchetta direttore d'orchestra
This is an ESP Telescopic Baton Belt Holster V1 (version 1), specifically made for use on tactical gear such as belts, tactical equipment, vests, etc. I made it for my friend, who needed this specifical holster to his tactical battle belt…
Digital 3D model of Beauxbatons Academy of Magic wand (Whole/Parts) Classic . This model is a fan-made replica of the wand from Harry Potter. We designed the wand based on different motives reminding the French wizarding school of…
Print 1x handle and 1x shaft, with length of your choice, and glue them in place. Print shaft with a relatively stiff material. PLA, PLA+, PLA-CF, PETG-CF and PC-CF. Do not use PETG, ABS, ASA, and Nylon, they either fail to maintain…
I recommend using fuzzy skin in the slicer for texture to the base I would not recommend using for fuzzy skin for the inner three stick because it would add friction and it would stay in place
I made this model without knowing that there is a “olight L-dock kit” on the market. :) https://www.amazon.ca/OLIGHT-Dock-Works-Seeker-Compatible/dp/B07QWSDRZD myine is nicer because the charger is integrated….and cheaper dual version…
Additionally needed: 1x M3x26 screw, 1x M3 nut, 2x cable tie Feed the cable ties through the holes (as shown) and fasten them around the Olight. In the files section, you can also find models for 25,4mm (1") and 30mm flashlights.
This is a handy dandy light diffuser which fits an OLight Baton II or Baton 3 flashlight. When in it's stored position, it also has the added advantage of putting some distance between the magnet on the bottom of your flashlight and coins…
This is a model of an older style police baton that was made for a small clay statue of a law enforcement officer. Printed on my Ender 3 Pro in PLA+ with 100% infill. Both 3MF and STL files included.
I designed this part to create different costumes for DUMMY 13 and used it for Black Widow .
This is a flashlight diffuse for Olight baton 3 flashlights, it locks in place, prints whiteout supports.
I've made this dock a year ago when my Sofabaton X1 remote arrived. The remote needs to be charged via USB C and I didn't want to leave a cable dangling on the dressoir where my tv is placed. So I designed a quick dock containing of 2…
So this is based off a pinterest picture I found, it's a shoe Kubaton. They sell for like $15 on Amazon , not sure if that's for one SET or one. I've had this in my head since I originally saw it but simple simple design. Anyways, work in…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Collapsible, Extendable, Retractable Baton. It is a good toy and a cosplay option. The head at the handle is screwed. The material I used is PLA/PETG Basic…
Diasomnia Baton for Silver and Sebek - Twisted Wonderland For all the cosplayers out there who want to PROTECT MALLEUS AT ALL COSTS. The baton extends with a strong flick of the wrist provided glue stays in it's designated area while…
(read all of this, Very important stuff here) Hello makers! This is a collapsing Baton/Nightstick I designed. IT is kinda cool and has 3 slides. Is a very basic design but looks quite nice. Now i Must warn you. The model is giant, so you…
a simple baton for 7" Actionfigures
Heavily inspired by this model https://www.printables.com/model/237142-olight-baton-3-holster by @mac190, for the Baton 3. I made my model to fit the slightly different button of the Baton 4, and with a belt loop that is a little wider to…
This is a cost-effective & minimal design fully enclosed printer; capable of 600mm/s at 30K acceleration and reaching upto 50c chamber temperature. Bill of Materials (BOM) stands at $260 , which is quite reasonable. I have tested printing…
Holster for your expandable baton (with diameter 26mm approx.). It is made to hold the baton horizontally.
i made this really long because i wanted to make a white cane for my dad who recently became blind
Fits 34mm MTB handlebars. Adapters for 25.4mm and 31.8mm are included. I recommend printing the adapters from TPU95. Recommended material for the rest: ASA GF or ASA CF. Use two zip ties to fix the handlebar and Olight (with its original…
Compact and sturdy telescopic baton, suitable for security and self-defense/Matraque télescopique compacte et robuste, a
I recently lost my favourite flashlight. It just slipped off from my belt and it was gone. So i decided to prevent this from ever happening again. This was printed with nylon but pet-g/ABS should be just fine. it was based on this one…
Źródło oznaczyło ten model jako treść 18+.
UPDATE: I think this is the one! Some time after creating version 2 I realized it was a bit fragile. It functioned fine but I seemed to break it about once a week or two. I changed the belt loop, it is now closed. When I broke the holder…
Tablestand to Load a Olight Baton 3 with magnetic charger
This model is a Kubaton style key holder. It can be useful in self-defense. It is big enough so you will know where your keys are. Styled after the original. The text can be personalized in PrusaSlicer. As it is on a round surface I left…
For those LEO that carry an ASP Baton with the belt holster. It comes with a spacer to accommodate different belt widths so it doesn't move up and down on your belt. Most people that I know have lost theirs. This fits in the grooves and…
This is a light diffuser designed to be attached to the Olight 2, 3, 4, and possibly other models. It is 3D printed using PETG. To achieve smoother surfaces, a relatively large amount of tree support structures were used during the…
Gridfinity bin for Olight Baton 3 flashlight. Placed with the clip down. This is designed to be placed at the gridfinity top layer, so it is not stackable. I printed this with a color change at the top 5 layers.
This Is My First Model That isn't Remixed! So I’D like it if you gave it some respect (maybe more than my other models) tell me if anything’s wrong! you are gonna need glue to connect stick to base
UPDATE: Version 3 is available. Shortly after creating version 1 I realized it was a bit bulkier than I liked. It functioned fine but I felt like It was “in the way”. So, I decided to make one from scratch. There are two design options…
Cover SofaBaton X2 gedruckt in feiner Auflösung mit TPU
I missed out on buying the conductor baton from the KH Orchestra so I made my own! I was able to print it split horizontally on a Taz 6 (see below) I just extended the middle and key (teeth?) area of this model:…
I saw that Sabaton keychain, I changed it into a standing Sabaton "S" logo.
PORTE BATONS DE MARCHE OU SKI Category: Sport & Outdoors
UPDATE: Version 2 is available . Using the OpenSCAD file from Jay Speidell I adjusted the holster to fit the Baton 3 Pro Max flashlight. I also added a lip to the belt clip and a cutout for the flashlights clip. The flashlight was…
If you print this with a red filament, you have a dual color diffused light and a white spotlight.
Ripped from the game Fallout 3. You have to cut it with Slicer and print it the size you want. Print Settings Printer: Anet A8 Rafts: No Supports: Doesn't Matter Resolution: 200 Infill: 20 Filament: no PLA Notes: Add this one to your…
This is the energy baton from Futurama. It is a lightsaber-like weapon, although it doesn't cut: it is a blunt object. URL (who I've a model of and will post in the future) and Smitty use them as their primary weapons to stop crime. I…
Gridfinity holder for Olight S2R Baton version 1 flashlight and magnetic charger. Only tested with Olight S2R Baton version 1. I don't know if version 2 of this flashlight fits? The overhang of the slot for the charger needs support…
This is not so much a remix, but ant82's remix (https://www.thingiverse.com/thing:2089542) is where I started and used it as a guide. This model is larger and assembles in an entirely different manner. It also uses a spring loaded shuttle…
Model of baton for training selfdefence, or something similar.
Bring the Grid to you with a Tron: Legacy Baton!
Lithophane light box using Sabaton album covers. Created using www.lithophanemaker.com. Print at .12mm Layer height and either 100% infill or 10 perimeter walls Category: 2D Art
Vanilla baton cookie cutter. Dutch: vanille baton koek steker Features: high-fidelity STL, sturdy design Printed with 20% infill and 0.2 mm layer height. No support needed. Designed for 0.4 mm nozzle width. Print with cutting side up.…
This is a 3D-Printable No-Supports music baton made for a friend. Included are two models: one clean and one with an example inscription. Buy me a drink at https://ko-fi.com/stetofire or donate directly Print Settings Printer Brand:…
NOTE: DO PRINT THIS THING UPSIDE DOWN! Majorette Batons using 16mm PVC electrical pipe as stick. Filled with sand to add weight and glue shut. No glue required to attach print to pipe! Print instructions Category: Sport & Outdoors…
This is the G.U.N.B Baton pulled from the Valorant game files and optimized to they are actually printable, Enjoy. -WARNING: NONE OF THE FILES ARE SCALED CORRECTLY Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
TAKES A 1/4 IN ROD FOR SUPPORT. Category: Props
Check the temps on g-code, I raised the temps 10' for my personal prints. The g-code makes a 21" hat form, this fits my 12 year old. The code barely fits on the platform of my mk3. When I converted if from the original stl's I enlarged it…
kick ass baton holsters from kick ass movie for cosplay
Helping hand flashlight holder for Olight Baton3. Stand is printed in 3 parts and there is a separate hood to keep the light out of your eyes if you don't have it angled down enough. This model was made with a removable head and a hole to…
holds Baton 3, Pro and Max
This is quick and easy print, flashlight snaps in place with little to none movement. You will require 25mm wide elastic band/tape (suspenders like). Best material to be printed with - nylon but probably petg will be just fine (maybe…
This is my first draft of a conductor's baton. The model is divided into 3 parts, which have pegs to reinforce the adhesive you choose to use to glue the pieces together.
Cover to protect the body and the lens of the light. The charging port is not blocked. print settings : 0.2mm
Designed to use 1" Nonmetallic PVC Schedule 40 Conduit for the main staff body. Length of tube should be about 30 inches.
Storage/Display solution for the Olight Baton4 Premium for a Honey comb storage Wall
Simple door/ wall sign for a great band and a sign for my office. Print instructions Category: Coins & Badges Summary Simple door/ wall sign for a great band and a sign for my office.
I love camping, and sometimes I need to have light not just on front of me but also aroundme. It's best if we want to play cards or prep the meal. I use glow in the dark but white or transparent will do. If you use Glow in the dark make…
This is a 1x1 holder for an Olight S1R Baton II and III. There's a good chance it also fits the Baton I, but I don't have one of those to test. I included the step file for easier remixing. There are magnet holes in the bottom for…
Button Replacement for a Olight Baton 3. I printed it in TPU 95A, but you may want to use a softer material. Model is designed to print without supports with a 0.2 initial layer and 0.1 layer lines. Outer rim has a slight tamper to allow…
Combine with a silicone mount band and some UHB 3M tape to attach an Olight S2R Baton a helmet or any other relatively flat surface. Print standing up with tree supports for highest strength. Could probably be resized for other…
Designed to turn a section of pool noodle into a baton for kids. Insertion portion is 30mm Handle is 22mm Regular is 51mm hand size Long is 75mm hand size…
This has multicolor available and you need to connect the two key looking things to the bottom and top. you also need to put the nut on it first.
The Tron baton (specifically the light cycle baton) is a versatile, sleek multi-tool from the Tron: Legacy universe. It serves as an ID storage device and transforms into various tools and combat weapons, including light swords and…
světelný kužel pro svítilnu Olight Baton 3
This is the Marshall's Baton melee weapon from the video game The Cycle: Frontier. Enjoy!
CAD modeled in OnShape specifically for the older Olight S10 Baton, this diffuser measures in at 2.25" tall, .052" wall thickness, .960" outer diameter and .908 inner diameter for a snug fit, so it wont fall off the flashlight. Print it…
Light diffuser for Olight flashlights Baton Pro and S30RIII. Material "ROSA" PETG fluorescent. Infill 100%
TPU Belt holder for the Olight S2 Baton flashlight. Tested printing on my Prusa i3 with Overture TPU filament. After printing, use diagonal cutters to remove the spacers from the belt slot
Kids managed to dig out the power button so I modeled a new one. Print with very flexible filament, what I used was rubberjet TPE88
🇫🇷 Description en français Ce projet réunit deux modules imprimés en 3D : un support de lampe Olight S2R Baton II (ou S2 Baton) , un holster pour Leatherman Wave . Les deux éléments utilisent le même système d’interface modulaire , basé…
I love olight's new Baton Ultra flashlight, but I have always used my lights lens down, to be able to do this I needed to remove the pocket clip to use a diffrent one, that left a gap where he original pocket clip was, so i made this…
Stand für Olight Baton 3 + Baton S1R Mit Aussparung für eine Unterlegscheibe (Außendurchmesser 19,9mm, Innenring 10,3mm) Unterlegscheibe einkleben, damit die magnetische Ladebuchse der Lampe hält. Hexagon Halter für Olights. Alle Größen…
This is a gridfinity storage bin for the Olight Baton 3 Pro Max flashlight. In this design the flashlight is laid flat, so ideal for drawers or other height-limited spaces. If you have the pocket clip on the flashlight, like I do, the…
This is a long (approx 4x the length of the flashlight) diffuser designed for Olight Baton 3 & 4. It should also be able to fit the Baton 3/4 Pro models too, however I have not tested this as I do not own a Pro model. Print out of PLA…
BEST DESIGN FOR OLIGHT BATON 3 PRO Snap in and out using Olights orginal clip groove. Simply remove clip from your Olight and install into mount. Printed using PETG for durability. (2) M4x25mm Socket Head Screws (2) M4 Nuts Compatible…
Head diameter: 23[mm] Take care of infill and wall loops. Higher density leads to decreased light intensity and increased heating. I recommend using 2 wall loops and a 10% infill - Octagram Spiral . Orginal model was printed on: Bambu Lab…
These hollow rails are an interesting concept. They are made by fysec, and currently the sizes that I want are not stocked, so I cut a longer rail down with an angle grinder (then tidied up on a bench grinder). The weight saving is…
Using the design principal “KISS” (Keep It Simple Stupid), I created a light diffuser. This one is for the Olight Baton 3 Pro flashlight. I wanted to use it as a small table lamp or hanging light. I made it with PETG because of the heat…
It's a balanced conducting baton. Print with: 100% infill (or 25 wall-layers = same effect) to get the balance. brim on to limit warping 0.12mm layer height or lower (0.2mm works but feels worse)
This is the flashlight this is meant for: https://a.co/d/4Aj51i1 The hardware to mount is on the https://threadboards.com/all.php page What you can use to mount: 186 Combination Mount and Hex Cap screw 12 mm.stl 177 HD8xTHR10HexDriver.stl…
Been using for a few months daily at work. Printed at a 25 degree angle with build plate only supports. Printed in ASA.
Dostal jsem za úkol udělat odznak s logem hudební skupiny Sabaton jakožto dárek ke vstupenkám na nadcházející akci.
Just print in place with material of your choosing.
