Liczymy pasujące modele…
Welcome to my first attempt at a printable kit of the Battleship Fuso in 1:625 and 1:700 scale. This model is based on the Fuso model in the game World of Warships, completely remodeled from the ground up, with many tweaks and adjustments…
This is a pocket-sized, travel game of battleship that fits inside an Altoids tin (ok… technically two Altoids tins). This mini version includes all the pieces you'll need to play including: Both Play grids Hit/Miss Pegs (I would suggest…
I hope you enjoy playing this version of the classic naval battle game as much as I did, both as a child myself, and later as a father with my own kids. It is one of the few board games you can easily play over Zoom, etc. This is a major…
This is another of my Star Gate project. The Arora is 60 cm long and it has retractable third leg so that it can stand on its own without any stand. All fits togeher via pegs and holes. No need for a glue. Check this playlist for the info…
Now out! The HMS Hood that was sunk by the Bismarck! Get your model here: https://www.printables.com/model/776292-hms-hood (Printing and assembly instructions below) The German battleship Bismarck! Named after Otto von Bismarck and the…
I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 5 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…
Update 23/7: Added floatplane (Curtiss SC-1). Available under “Download STL” files. Update 25/7: Updated Assembly Guide for AA gun placement. Update 29/7: Revised Aviation model for better printability, .3mf updated to include Sprueless…
Printing assembly instructions below! The HMS Hood, the first of the Admiral-class battlecruisers built in 1916 for the Emergency War Programme. Since then it has been a feared battleship and a proud jewel in the Royal Navy. Sunk by the…
I've been trying to make a model of Bismarck for years at this point, and I've never really gotten it quite right. That is, until now, because I finally sat down and actually put effort into it. The hull was challenging, to say the least,…
Here you have another large 80cm filament print of a robot. This one is based on the Cylon character “Centurion” from the Battlestar Galactica movies and series aired in the 70ies & 80ies of the last century. The original 3D model was…
A few years ago I wanted to have a Scharnhorst - so I made one… I dont know anymore why its scaled so strange but the hull needs to be printed in scale 287 if you want to have a 1:350 model. The smaller parts need to be scaled smaller but…
IJN Japanese Battleship Yamato from World of Warships. Best printed at a length of 180-200mm Infill: 8 Supports: No Walls: 2 This is a stylized model by Subhunter59 and is for free use.
this model passes in 0.12 on a FDM. with tree supports for what and cockpit. only the canopy is too thin to be printed in FDM I work on it precisely to either print it or make a mold to make it in a plastic bottle.
< Beep bada beep AI is loading... > Is it a top secret stealth aircraft? Or is it a gate to another dimension? No! It's the next big thing since sliced bread! Inspired by hardcore gamers all around the world.... With edges so edgy it will…
German Battleship Bismarck from World of Warships. Best printed at a length of 180-200mm Infill: 8 Supports: No Walls: 2 This is a stylized model by Subhunter59 and is for free use.
It's been a while since I made a model for BFG, so here's another battleship. This is a Retribution-class battleship, however this time I designed it from scratch in Fusion 360. It is my own design but is very much influenced by the…
Don't you hate the way most coasters don't catch the condensation coming off your ice-cold drink? Well, this coaster is just what you need! A beautiful coaster that will protect your coffee-table or desk while you watch Battlestar…
US Super Battleship A Fix of https://sketchfab.com/3d-models/us-super-battleship-rhodeisland-c32ca1eb79e043adb8889e5e8cfb1d77 Removed all the wires. Solidified, Added .2 offset to entire model.
I couldn't find a Battlestar Galactica model from the new series on Printables, so I thought I would bring them to you from Thingiverse. I printed this great model from EDY209 on Thingiverse a while back. I also used the fixed parts by…
Update 26 March 2023: Version 1.2 is now live, featuring numerous fixes for minor oversights. Details in the changelog file. Approximate dimensions of this model at 100% scale: 25.5"/65 cm length, 4"/10 cm beam, 10"/25.5 cm height. All…
I couldn't believe that I couldn't find a Cylon Raider from the original series (TOS) on Printables, so I had to add this one from newtrix on Thingiverse. His is a remix of Astrofossil's design also on Thingiverse. Newtrix split the…
Before you print! This is a special model, that is ment to be shot at, with an airsoft gun. It has many watertight compartments, so it can take multiple hits (depends on how strong gun you have). Because its ment to be destroyed, I did…
This battlecarrier Bismarck version is fully printable and I actually printed it, but I didnt finish the paintjob so I decided to upload just the render. For Scale 1:350 please use the cura scale 0,285% because the model is in 1:1 scale.…
Battlestar Galactica Colonial Raptor. I couldn't find any models out there, so I took one from the game Diaspora. I extracted the model from the game, chose the highest detail mesh, converted it to stl and fixed the surface problems in…
Tokens for playing naval battles; as per MB rules of 1990 there are 5 ships, from the largest to the smallest they are: Carrier (5), Battleship (4), Cruiser (3), Submarine (3) and Destroyer (2). You can find all my models here , thank you…
The best things about 3D printing is getting to print things you loved as a kid, the Battlestar Viper is one of mine. I searched and found many versions. I wanted one with landing gear so it would sit better as a display. So, I started…
Im uploading my reconstruction of the french battleship Gascogne. I used the World of Warships model as a visual reference, but I didnt copy any ingame content. The model is scaled 1:1. For 1:200 scale use the 0.5% slicer setting and for…
this a battleship use supports or it will turn out bad
If you're feeling brave enough, multicolor option is made available. Use presettings for desirable outcome. 15% gyroid infill 0.1mm-0.2mm layer height Supports required
A storage solution to bring dice throne to the table quicker. The covers use magnets to hold the covers. To remove the covers I used the dice throne trophy ( https://www.thingiverse.com/thing:4121167 ) and added a magnet to it to act as a…
Split up specific stls for printing with different colors in case you have an MMU or equivalent. Gray bits Black bits Copper bits Blue window bits Yellow engine bits Mostly followed Martin's CAD on Youtube for colors, but it's not like…
Small enough to fit in an Altoids tin! The pins are he made out of 1.75mm Filament cut to 10 mm Long. Don't have an Altoids tin? Print this one!
Battlestar Pegasus Instructions this is Battlestar Pegasus from the New Series Battlestar Galactica Category: 3D Printer Accessories
Overview The BattleStack is a modular carrier to hold miniatures, dice, tokens, and more. Compact and customizable, the BattleStack can be used for DnD, skirmish wargames like Kill Team, and other tabletop games depending on what you need…
I loved Battlestar Galactica as a kid and I found this cool model over at the STL Finder https://www.stlfinder.com/model/1970s-battlestar-galactica-cylon-centurian-helmet/5612916 I've modified it a little to best represent how I thought…
Cylon Raider : Battlestar Galactica 2004 Series bio-mechanical life form . While it resembles a sleek, "Cylon-head" shaped spacecraft, it actually possesses a biological brain, organs, and even blood, allowing it to "resurrect" into a new…
This make includes 5 new ships models for the hi game battleship! (see image attached for compatibility check) Includes 3 Spot Yatch 4 Spot L-Shaped Aircraft Carrier 5 Spot Plus-Shaped Shipthing 4 Spot 2x2 Dock/Raft 3 Long but Diagonally…
Print the turret facing upwards, vertically. Use adaptive infill to make the barrels and blast bags portions 100% infill. You will need a lot of support for the turret, so use a support brim. No support is needed for the storage barbette.…
Al Mon has a beautiful Viper MkI on Printables with 45 files. It is an awesome model. But, not everyone wants to build with that many pieces. I couldn't find a simpler one here, so I uploaded DavidBogearts two piece model from…
Here's my take on the original series Cylon centurion from Battle star. I't been split with Luban and the eye scanner piece goes from the inside and pushes out The mouth guard just glue in place I made the small holes in the forehead that…
Bring iconic sci-fi history to your workbench with this massive 20.5" x 10.5" (52 cm x 27 cm) replica of the Battlestar Galactica Viper Mark II! Truly an impressive showcase piece, this model captures the aggressive lines, triple-engine…
Very detailed Calakulumn (Or Karakulum) class Great battleship from space battleship yamato. While it is somewhat recommended for Resin printers with this, I did redesign this version of the model to be compatible with filament printers,…
Battleships For Micro Armor Including Patrol Boat, Submarine, Battleship, Cruiser, Battleship
This is a remix of my own Travel Battleship game. After having printed two sets of games, I saw that there are a lot of parts (2 x 64 markers). Then I realised that it is not necessary to track your opponent's shots, with exception when…
This is my version of a Star Wars Battleship game. This version is only with ships of the Galactic Empire. A version with Rebel ships is in work. Assembly: Start with “Box 1” and put the “Box 3” and “Box 4” in Than you can add the ships…
A prank I designed for the BATTLESHIP board game, can be used as a replacement part if you like causing chaos at the dining room table. Printed on a ELEGOO Saturn 2 resin printer with 8k Grey ELEGOO resin, using Lychee slicer and UVTools.…
I liked the original model a lot, but I think two layers for the base is a little bit too thin especially when ironing (can see through the base with two layers). So I added a third layer at the base. Print instructions Print using 0.15mm…
This is my version of a portable “Battleship” Game. Update: This is the first version. It allows you to track also your opponents shots. Therefor you need a lot of game pieces. My remix reduces the number of pieces. All my travel games…
This is the battleship from Planetary Annihilation Titans, ripped straight from the game files. Comment if you have a request or post it on my group page. I will upload it within 2 days max. Category: Video Games
I fixed all of the errors I could and merged the Front 2 parts, Mid 2 parts and the Rear 2 parts. I am still working on the Flight Pods, but I can confirm these 3 parts print just fine SLA. Not sure of the scale until I get the whole…
I created a Stealth Battleship Catamaran Wolvie Class - SBCWC for everone, who like models of Battleships :-) I wanted modeled my own (fictional) Stealth Battleship Catamaran in my Wolvie Class, in short SBCWC. I took and remodeled 5…
1/16 display model of the main 15 ton anchor of Imperial Japanese Navy Battleship Yamato. Glue required for assembly. The bottom part, anchors and the rod have pins to help allignment. Build list: Anchor model: anchor: 2 pieces 2 pieces…
Overview This token organizer was designed to carry my set of acrylic and cardstock Kill Team 2024 tokens. The cover uses snap-fit tabs to close up the tray and keep everything inside secure. My tokens being held are acrylic versions…
Three cubits modelled from close ups, ideal for resin printing.
Best Viper model out there. I just added some plugs to make the engines and wings easier to assemble and sturdier. The main fuselage was clipped to fit on a Flashforge Adventure 5. I also played with the Viper base from:…
this is the 1/1700 scale drake class from gundam seed.
A Cylon helment/head from Battlestar Galactica. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've…
This is a simple battleship (self-designated Endeavor-class), based loosely on the pre-dreadnought battleship Mikasa and other battleships of that era ( https://en.wikipedia.org/wiki/Pre-dreadnought_battleship ). This model is relatively…
Simple toy version of 'Mohawk Cat' from the game 'The Battle Cats'
My take on an Insert for Keep the Heroes Out. It should fit everything into a single Box, including all expansion content and my upgraded Token Set and sleeved Cards and a set of printed (on A4 paper) versions of the manuals (german in my…
I have always loved the look of the Valkyrie, and Davids model is fantastic. I took my purchased CGTrader greeble sla's and did a re-skin (not studio accurate) of the model and increased the scale for my Anycubic Mono. I made 2 versions,…
Tired of playing Battleship with the same 5 ships? Hopefully this can add a bit of variety! This new set includes: A LNG tanker ship (1x4) A floating oil rig (2x2, something not seen in the original game) A small rigid ship (1x1, also not…
The battleship bb 1 uss Indiana I saw printsnails simple large battleship and wanted to make my own so i saw the model ship (uss Indiana) and made a simple 3d model
Great source files at Thingiverse by EDY209 and David Bogearts for a great ship of the past. However, some of the parts had holes or gaps that negatively affected the print. I did what I could to fix those files so they print better. The…
This is an expansion pack for my BattleFleet (Star Wars vs Star Trek) game: http://www.thingiverse.com/thing:2052630 The set consists of ships from the 2003 Battlestar Galactica Reboot. BaseStar Cylon Raider Viper Battlestar Galactica…
This is a simple battleship (self-designated Endurance-class) with simple slip-fit turrets. Unlike the “Simple Large Battleship” design, the hull is printed in one piece and about 235mm long, allowing it to fit on most print beds (it fits…
Hello there! I remixed a popular and at the same time quite necessary model for every printer into a warship. Everything is printable without supports, so you can test your printer with this model too. I added two weapons on the side and…
the well known infamous glove from slap battles is now usable in real life and you can play sb in real life now! (not made by me btw)
This Benchy is a battleship Benchy – a mini warship with cannons at the front and on the sides. It's a perfect test print!😀👍 Happy print!😁🎉
A Viper sign from Battlestar Galactica
Design Concept The Battlestar Galactic Mini Model is inspired by science fiction battle starships, capturing the essence of a classic vessel in a compact size. Purpose This model serves as a collectible item for fans of space opera series…
This is a Battleship for Memoir 44 that has printable counters.
Model of BSG Blackbird created in Tinkercad and Fusion 360
From "Galactica 1980" also seen in Buck Rogers in the 25th Century Season 2
Everyone knows about battleships, and they were the great metal beasts of their time. I made this to give you something fun to remind you of them. Printing Print the body slightly bigger so the turrets fit snug, since I didn't add the…
replace ships in Battle ship board game to make Benchy battleship bord game ------------------------------------------------------------------------------------------------- battelbenchy_v2: ship pack made to fit this version of the game…
Battleship made as a learning tool for Fusion360 that turned out pretty well
These tokens can be printed to replace the battleships in the game. The different arrangement of pins calls for different strategies and game plans from the original. The pins and holes are compatible so you can use the original board,…
its a battle ship that i made i hope you like it and Happy printing
Model of the Amanga class from space battleship Yamato 2205 and 3199. When printing, while you can do the base size, I would recommend doing 2-3 times the base size for the most amount of details and for a decent size. Stand includes its…
I made this stand for DavidBogaerts model from Thingiverse. His original file is X=63.51mm, Y=119.03mm, Z=45.17mm. I scaled it up 140%. I chose that size because I had a Cylon Raider model that I scaled up to 387%. I estimated the…
I made these parts to make the print better. Original model on Thingiverse: https://www.thingiverse.com/thing:2432066 The dome replacement was necessary because the original didn't seem to be fully connected on at least one half of the…
These are the ship models created for the battleship game: - torpedo boat: 2x1, - cruiser: 3x1, - battleship: 4x1, -aircraft carrier: 5x1.
My original posting on Thingiverse: https://www.thingiverse.com/thing:5093197 Layered for multi-color printing via filament swaps Order of color: Yellow --> Light Blue --> Gray Blue --> White --> Black Note: The cults3d listing at…
A sister class of ship to the Bortas, the K’T’inga is a Klingon battleship with huge arsenal of torpedo launchers. The main launcher is positioned right at the central section of the bow, below the bridge, giving the Captain of each…
Multicolor Battelstar Galactica Officer Badge. Haven't printed it yet cause I don't have the right colors on hand. Maybe someone can help me out by positing a make. Check out my other badges. And have fun printing.
This 3D model is inspired by the French La Fayette class frigate (you can see the difference in the haul and other section of the ship), reimagined as a futuristic battleship. Designed with clean geometry and naval-inspired details, the…
Organizer for Battlestar Galactica - Base game and Pegasus to store them in a single box. Some decks are stored merged since we almost always use Pegasus. I printed an additional english rulebook for Pegasus, so maybe you will need a…
You Sank My Saddam! YOU INFIDEL!!! - Introducing: Where Saddam? - A spin off that shouldn't exist Find the leader & his trusted companions 1) Saddam 2) Fan 3) Air vent 4) Entrance hidden by bricks & rubber Overview - 8 x 8 grid layout -…
Its just some small battleships…
Replacement pegs for the original MB Battleships game. We bought one 2nd hand and it had all the ships but not enough pegs to play the game. So, now we have all the pegs a guy could ever need. print with adhesion skirt or they fall down…
A legendary German battleship (please download and like it, I spent a couple of days on it) It's floating, by the way.
Remix of https://www.thingiverse.com/thing:4705401 . Fuselage modified to more closely match the model in the show.
Hello everyone, I have vectorised a illustration of a battleship and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes! Please note the settings in the screenshot
I got a neoprene mat instead of the board, so I had to make some new resource dials. These are the same size as the cardboard, but has room for a 5mm diameter magnet underneath. Layers are 2mm and 3mm. I did a filament change on 2.1mm and…
Since I remixed and re-skinned the Valkyrie, why not add a spoiler and change the gun configuration on the landing bays? Not lying, I dig the look. Canon or not (Wiki says it is) it is a design I am very fond of. I have not test printed,…
![IJN Battleship Yamato [大和] anchor 1/16 display model](https://media.printables.com/media/prints/877271/images/6728357_8bbca9b2-6460-4eb1-bf68-f68c2195cc52_af7ed5c0-35f1-4ffb-8483-0bda03b68853/large_display_ee06bc18-39ae-4b74-8f2c-d0e952938ab7_877271.png)
