Liczymy pasujące modele…
Conical measuring aid for bicycles, works with a tape measure to find the center of any recess from 6mm to 30mm. Works with 8mm crank bolts, Shimano crank fixing bolts, and hollow spindles. Put the hook of the tape measure in the recess,…
This mounting plate results in a very robust mount for the DJI RC remote control, such as those offered for the DJI Mini 3 Pro drone. The mount is tailored to the remote control and intended for outdoor use, especially on bicycles. Note:…
Beer holder for your bicycle. Maybe the most useful bike accessory for the summer:) It's very easy to put the beer can into the holder and by pushing the lever you can easily grab it anytime, both for 330 and 500ml cans:) Easy to print,…
Front mudguard extension for Riese & Müller bicycles. This extension is specific to the SKS mudguards that Riese 1 Müller uses for various models such as the Charger, Nevo,... The hole provided corresponds exactly with the bolt of the…
The bike has a Shimano Nexus hub gear, which is why one handle is shorter (right 65mm) and one longer (left 98mm). If you want to adjust the length, you can simply apply a “non-global” scaling in the slicer. These grips are for handlebars…
The bottle cage and bike mounting bracket are printed separately. Use epoxy or some strong glue to glue them together. The bottle is secured in place using bungee cord. I used was 4-5mm bungee cord. Add one flat head M4x8 screw as an…
Just added a 10mm hex (slightly smaller so it fits better) to cmh's design so it sits easier in my cannondale cranks
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker The capsule is large enough for a couple of house keys and…
Bicycles Tire Changer So you don't have to go through the hassle of changing tires in the middle of the countryside.
Replacement hinge bolts bushings for Tern Link B7/C3i/C7i/C7(and all other FBL 2 Gen 1 and OCL Gen 2 frames). Hinge bolts are a known weak point on most 20" Tern folding bikes from 2013-2017 (ish). The original coated steel (early models)…
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
Print in PETG or stronger (ASA, Polycarbonate). Use 4 zipties to attach the holder to your saddle rails (the upper ones through the cutouts in the support rib, and the lower ones around the rail attachment and through the triangle so it…
A front wheel riser for the roller trainer, as I couldn't find a ready-made one for the height I needed. Suitable for tire widths up to approx. 55 mm, various heights.
Telephone holder for Redmi Note 11 or for a phone with similar dimensions (159.9 x 73.9 x 8.1 mm (6.30 x 2.91 x 0.32 in)
This design comes in two versions. The story behind it: Originally I designed the fender extension to have that rounded trailing edge. However my first print ran into a little problem and the parts were cut off a couple of millimeters…
Its a vertical bottle cage designed for recumbent bicycles.
This pedal holder is designed to fit behind the seat tube on a Brompton bicycle. It provides a convenient way to store your MKS Ezy pedals (10mm axle) when detached. Print in PLA or PETG and install two 2×10mm magnets in the base for…
bike strap - upcycling bicycles tubes | Fahrrad Spannband - upcycling Fahrradschläuche → 0.4 Nozzle → 0.2 mm Layer Height → 30 - 40% infill → PLA → the strap is made from old bicycle tubes with the Ribbon Weaving Techniques (LUME - Bands)…
I've designed a mount for the KT36/48 controller variant that is 40mm x 68mm x 130mm I've provided the Freecad model. I originally made this for a Gary Fisher bike conversion, I am not entirely sure if the bottle mount holes will work for…
Mounts for front and rear indicators on a bicycle, should work wit most motorcycle indicators using M8 mounting bolts. The rear mount is made to be cut with M5 Treads on the fixing surface to the rear light mount (of the bike/luggage…
Bicycle bottle holder - reduction of the old type for new bicycles
This chain / sprocket / crank / chainring guard should fit 20" Trek MTB mountain bikes like MT60, and possibly 24" bicycles like Precaliber or Wahoo that have a 5-bolt guard with 150mm outside diameter similar to 'Dialed' part W292771:…
Wessen Fahrrad mit hydraulischen Scheibenbremsen ausgerüstet ist, der sollte, wann immer ein Rad z.B. zum Wechsel des Reifens abgenommen wird, verhindern, daß versehentlich die Bremskolben herausfahren und so den Wiedereinbau erheblich…
You also need to print a fitting counterpart! See below. Wurkkos HD03 Flashlight Mount for Bicycles Holder for the Wurkkos HD03 (or similar), designed to mount on to a bicycle, round pole or the Vello folding-bike magnetic safety-lamp…
Ein einfach zu druckendes Schutzblech für Kinderfahrräder. Gedruckt in TPU 95A lässt es sich leicht in Form biegen und mit Kabelbindern an der Gabel befestigen. Passt auf die Druckfläche des CoreOne. An easy-to-print mudguard for…
Step-file has multiple bodies, so you can easily use different colors. I used red and black PLA.
Beer holder for your bicycle. Maybe the most useful bike accessory for the summer:) It's very easy to put the beer can into the holder and by pushing the lever you can easily grab it anytime, both for 330 and 500ml cans:) Easy to print,…
This design comes in two versions. The story behind it: Originally I designed the fender extension to have that rounded trailing edge. However my first print ran into a little problem and the parts were cut off a couple of millimeters…
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
This chain / sprocket / crank / chainring guard should fit 20" Trek MTB mountain bikes like MT60, and possibly 24" bicycles like Precaliber or Wahoo that have a 5-bolt guard with 150mm outside diameter similar to 'Dialed' part W292771:…
Wessen Fahrrad mit hydraulischen Scheibenbremsen ausgerüstet ist, der sollte, wann immer ein Rad z.B. zum Wechsel des Reifens abgenommen wird, verhindern, daß versehentlich die Bremskolben herausfahren und so den Wiedereinbau erheblich…
In my opinion, Enely has designed the best bicycles for model railways that I have found so far: https://www.printables.com/model/19491-womens-bike-h0-scale https://www.printables.com/model/30893-bike-in-h0-scale Their design is made for…
That's a GT bicycles logo. Can be used for keychain creation etc. Inverted and non inverted versions + a base. Post a make if you do any :)
Esta fijación ha sido diseñada para bicicletas pequeñas con suspension trasera. Sólo soporta botellas de agua pequeñas
Bicycleseatman Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
You also need to print a fitting counterpart! See below. Wurkkos HD04 Flashlight Holder for Bicycles Holder for any flashlight using the same clip as Wurkkos HD04 , designed to mount it to a bicycle, round pole or the Vello magnetic…
If you have a standard (non-electric) bicycle, you need to attach this component to the central section near the wheel. Of course, I couldn't print it myself because I don't have a printer capable of handling robust filaments like ABS.…
Supporto per smartphon con possibilità di regolazione in altezza e reclinabile in orizzontale e verticale. Stampare con supporti dove necessario e consiglio di utilizzare un infill del 100% se si usa pla, altrimenti se si usano materiali…
When I just bought the cheapest bike trailer available, it came with a hitch adapter for the seat post that was at least an order of magnitude too small for ALL of my bikes. As I ocassionally need to lower the seats for transport on a…
Printed in Petg, 0.3mm layer, on Tronxy 5sa 400. Preference should be given to a slow speed for good adhesion of layers.
I wanted to mount cheap LED flashlight and SP connect mobile to my bicycle. This is variant 1 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.25 Infill: 50% Filament: Polymaker Polyflex…
USB socket for charging things on your bike via the hub dynamo. You need a socket like this: https://www.conrad.de/de/p/usb-einbaubuchse-2-0-180-tc-a-usb-a-top-203-usb-a-1586516-tru-components-inhalt-1-st-1586516.html and optional a…
A clamp for bicycles without fender mounts. The clamp fits around 14.5mm and is secured with an M5 screw. It includes a spacer ring to distribute the force on the clamp. I used fenders from SKS, and it has worked perfectly so far. If you…
