Liczymy pasujące modele…
A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes . The STLs for three different sizes of each style are included here for convenient printing. This model is fully…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Info: carabiner modification of my previous model so this carabiner has the same locking hook , which does not allow carabin to be extended added: partition for key rings (key rings can be put inside through the gap and it will hold them…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
use ❗PETG❗ or some flexible material (do not use PLA) Info: carabiner modification of my previous model this variation is more stiff (harder to open, harder to insert key ring through the gap) Dimensions: its height is 7,5 cm (bigger by…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, here I have a functional wind turbine for you. There are 2 mounting options: *There is a hole at the bottom of the stator, into which a rod with a diameter of 10mm can be inserted. If the rod is slightly larger or smaller, it will…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a CD/DVD/Bluray desktop 5-1/4 drive cabinet / case to be printed in 2 parts and assembled with a few screws and nuts Material 4 M3 Square nuts 4 M3 6mm Allen bolts 4 M3 25mm Allen bolts 4 rubber / cloth pads (optional) For more…
Wydruk około 4,77 €–5,82 € nettoWstępna wycena jednego wariantu
Simple Resistor Cabinet with 21 slide out trays. Autodesk Inventor ipt files included for customizing. No supports needed.
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
Small Rittal key, to open electrical cabinets. print intructions: PLA 100% infill 4-5 perimeters
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
This vertical wind turbine is even more garden related as it uses ¾" wheelbarrow bearings to keep it spinning nicely. To keep the helical shape printing nicely without supports each segment covers 30 degrees. You need to print three…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
TheTickz made an amazing carabiner clip and i found it while searching out attachments for SWMBO(She who must be obeyed)'s upcoming vacation. However, I wanted to make it be able to be screwed in with a wider flange base as she will be…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
a simple drill guide for standard 3 or 4 inch door and drawer pulls to aide in getting everything square and clean. Printed here in PET-G since it is a tool and may get exposed to heat. I made this for a bathroom installer.
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Manchon pour Porte Bobines d'origine Prusa MK3 - MK4 Il permet de rendre le déroulement du filament sans effort, de plus comme la plupart des bobines sont en carton recycler celle-ci dépose par frottement depos des poussières sur les…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zo kan je handdoeken ophangen aan de kast deuren. Misschien moet je de dikte wat aanpassen voor over jouw deuren te hangen. Het binnen werk is wel in een flexibel materiaal geprint. This way you can hang towels on the cupboard doors. You…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
This is a simple device for hanging your hand immersion blender, either corded or uncorded inside your kitchen cabinet. It is composed of two parts so that the hanger part can be easily remove and replaced. In this case, it fits the…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replaces broken or damaged ikea Ställ retaining shoe cabinet bracket pin peg. Printed at 45 angle with 5 layer walls
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
A couple of years ago I broke part of a joint to an Outwell camping locker. I temporarily repaired it and now, thanks to a Prusa MK3S+ 3D printer and Fusion 360°, I've designed and printed a new one. I haven't installed it yet, it may be…
Wydruk około 3,10 €–3,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Voici un porte bobine de wanhao rallongé pour les bobine de prusamment.
Wydruk około 2,33 €–2,84 € nettoWstępna wycena jednego wariantu
Cabinet handle Cabinet pull Drawer handle Drawer pull Furniture handle Furniture pull
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
Cabinet handle Cabinet pull Drawer handle Drawer pull Furniture handle Furniture pull
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Cabinet handle Cabinet pull Drawer handle Drawer pull Furniture handle Furniture pull
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Description The former IKEA Corner base cabinet pull-out fittings from the series Rationell tend to sag under the weight of the pots. In my case, the front corner hung more than 7 cm lower than the center bearing, and the pots slid toward…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Einfacher Clip, um das Fahrradlicht irgendwo zu befestigen mit z.B. einem Seil oder Karabiner
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
RC1 Buttstock Decal ‘RC1’ is in a bold Asul font; the rest in Gidolinya . The smaller size of the other letters turned out terribly difficult to work with, so I ended up using only the 'RC1‘ part. Reeder Handguard Label The ‘Reeder’ label…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Over Christmas break hanging out with the family, we really got into the game "L iars Dice ", so I made a nice little file cabinet for our dice, and there are magnets in the back of the drawers to keep things in place! I used 6mm x 2mm…
Wydruk około 3,05 €–3,72 € nettoWstępna wycena jednego wariantu
I printed the Small Parts Cabinet and top tray, and wanted to place my movement holder securely on top.
Wydruk około 2,43 €–2,98 € nettoWstępna wycena jednego wariantu
Takes 4mm screw. I print with the full bottom on the build plate and use support for the overhang. Might not need supports.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Le contre poids du flexible de douchette de mon robinet de cuisine bloquait contre la tablette du placard sous-évier. Plus maintenant. @+ Print Settings Rafts: No Supports: No **Resolution:** 0.2 Infill: 15 Category: Kitchen & Dining
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
The pocket of our cabinet is too small and made it so the compost caddy couldn't seat into the mount . This is a simple 5mm shim that sits behind the metal plate that is screwed into the cabinet to add more clearance to the mount.
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Carabiner with lock that I created for study For greater strength, increase the number of walls. Normally I use four walls but I recommend using five or more. The use of supports is required in the parts highlighted in the image. WARNING:…
This is a funny whistle which combines the principle of a turbine with a air raid siren. this model has almost no sense but to be fun :) it gets better over time due to the grinding of the seams on the barrel a bit of silicone spray in…
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
I am not the original creator. If you find any errors im my post please notify me. If you are the origina creator massage me and i will take it down if you would like. original post https://www.thingiverse.com/thing:1819242/files
Sturdy carabiner with a simple shape, available in 7 sizes. [ Information ] Even sturdier removable rings are available on the following page. “Split Ring (6 sizes)” Printing Difficulty 4 types of data are available for each size. For…
The name of this carabiner reflects the important message that no one should trust their life with it! That is to say, it is NOT FOR CLIMBING. With this disclaimer out of the way; my goal was to try and make that best climbing-inspired…
IMPORTANT In the current orientation, the door handles will snap . Please print them on its side and with supports to improve their strength. I designed and 3D printed cabinet doors for IKEA shelves. They don't require any screws, utilize…
I love 3D printed springs, and I wanted to include one in a carabiner for a while. After few rejected ideas I came up with this (cool?) inverted spiral mechanism that acts as the spring for a carabiner. I think it's pretty cool and wanted…
My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…
I've been experimenting with designing and printing thin, foldable sheets and thought of creating a small drawer organizer with the idea. Demo and assembly at https://youtu.be/KBI11ScuB-M The folded drawers end up with these "wing" like…
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
Want to progress your rock climbing prowess while completing simple household tasks? Transform your morning routine into a high octane test of endurance and will with a quick swap of your cabinet hardware. These cabinet knobs will add a…
The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…
Print Settings: No supports needed (as long as your printer can handle bridges fine.) Layer height : 0.32mm (you could go lower, but thicker layers will make it stronger) Walls : minimum 3-5 Infill : doesn't matter; anything >10% should…
Info: v3 remastered version of my previous carabiner model (created after a while of using it) - (it still uses great locking idea from this model - thanks!) so this carabiner has the same locking hook , which does not allow carabin to be…
Print in place carabiner with a swivel
Utility Carabiner: Secure and Versatile Clip for Everyday Use Product Description: The utility carabiner is a versatile and reliable accessory designed for everyday use. Featuring a pre-tensioned mechanism, it stays securely closed…
Wind Turbine inspired by the Liam F1, using fibonacci sequence for the blades. Leaves in a fibonacci pattern in plants maximise the area for photosynthesis and minimise the amount of blocking overlap. The same prinicpal can be applied to…
Print yourself a neat Arcade Cabinet for the Switch.
Glass mount with hinge for broken or missing metal original bracket. Can be printed without support if printed the weaker way - Ironically it was designed to be printed the wrong way and now it can be printed that way without support ……
Easy to print yet very well working pinwheel, looking more like wind turbine. It uses common bearings easy to find in DIY stores or in sport equipment stores (they are used in roller skates). All parts fit into 18x18x18cm volume printer,…
Easy to hook on your backpack or keys. WARNING: Do not use for climbing!
Need more bathroom storage without cluttering your sink counter? This removable cabinet door organizer turns unused space inside your vanity into convenient extra storage. It’s perfect for makeup, skincare, cosmetics, cotton pads, hair…
I needed a holder for my Brother P-Touch H100 to mount it to the wall or the side of a cabinet. As I didn't want to drill holes into the furniture I designed it with a hook that can be attached to the side of a cabinet - or as in my first…
4 in 1 Schlüssel für Schaltschränke und Industrieanlagen. 2x 4 Kant Schlüssel, 1x Dreieck und Schaltschrank Schlüssel. am besten mit 60% oder mehr Füllung drucken für Stabilität. 4 in 1 key for control cabinets and industrial plants. 2x…
This rack holds 8 plates of many sizes.
Here's my 'Mk2' Vertical Axis Wind Turbine (VAWT). I've always liked the lines of these, but they really caught my attention a few weeks ago when I realised that I couldn't explain how they work. I'm now a lot less confused about how a…
Print both parts from PET-G and put them together. Enjoy. --- DO NOT USE FOR CLIMBING!!!
OTHER CREATIONS: GEARSHIFT KEYCHAIN V2 - [ FREE DOWNLOAD ] PATREON : [ Follow me on patreon for free access to our 3d models library and exclusive content!! ]
This 4-Way Utility Key is designed for opening a wide range of electrical, utility, and service cabinets. The compact cross-shaped design combines multiple common key profiles into a single tool, making it ideal for technicians,…
The air tag holder has a plastic carabiner and is compatible with a key ring or backpack. Tested in ABS, works properly. Every printer has a different tolerance, try it before and, if needed, scale it a bit. 0.2 layer, support not needed.…
This model is a continuation of my Desktop Mini Tool Box project. There are multiple variations I have created for your favorite drawer configuration. Current configurations: 4 Drawer (2 full, 2 half size) Possible Upcoming…
The only thing that is important for this model is enabling elefant foot compensation so that the print will turn out very precise otherwise the whistle wont make a sound.
Now updated to an improved V2 design with additional “Compact” and “Belt” variants available! See update log for details. Summary: Extremely versatile hook and D-ring style carabiner combo, inspired by ITW GrimLoc carabiners I have been…
Info: well I like a lot 2 existing models and I have just combined them :) @BuildX model is great for locking hook @Breaks'n'Makes model is great for its simple shape so this carabiner has the same simple shape + locking hook Dimensions:…
Its an Turbine blower remix to fit an 775 motor. The original is from JolietDelta. I improved the design to fit an 775 motor. Also the turbine is a lot bigger than the original, the parts fit on an 200x200x100mm (LxBxH) bed. You can…
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
Wind turbine model in cross-section with gearbox and generator and rotating blades I have always been fascinated by wind turbines, their majesty and size as well as their function. Therefore, I prepared a model that would show the…
Designed to print z=0,2, PETG (100%infill) You can include 3 hangers if you have smaller cups. Print orientation without support:
A set of versatile, lightweight carabiners designed for maximum functionality with minimal weight. With four sizes included (S, M, L, and XXL), they are perfect for everything from organizing keys and securing gear to your backpack to…
Thanks to Lukass for the great wind turbine. The wind turbine turns very well. An (Brass) axle 4x190 mm, 4x ~ 80 mm and a screw M3x6 are required. Drill out the bearing blocks with 4.2 mm. Drill out the cross hole of the conical disk with…
Update Aug 20 2025 In response to comments about the fit of the threads I am now including renders with increased thread tolerance gap. You can also make custom adjustments to the fit by editing the value of the ThreadToleranceGap…
electric cabinet key (triangle)
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
S-biners are common useful tools for all kinds of light-weight, small connection needs. They're good for things like keychains and other random attachment needs, and perhaps you'll find a good use for yourself. I recommend printing in…
A small wind turbine made from ApolloX material, perfect for outdoor use in your DIY weather station. This model uses a bearing to easily turn. (A 608 bearing) Used materials: FormFutura ApolloX If you want to see more follow us on **…
Details I had mounted my GoPro to my helmet to shoot outdoor action movies. I love the original GoPro cameras for their great stabilization features, but they do come at a price. So who wants to see a costly camera banging on the ground,…
I needed a few legs for a bathroom cabinet, so I just made something myself! If it isn't so well visible in the pictures, the leg is slightly angled. This leg has a height of 160mm , you can of course scale it a bit in Z but note that you…
A symmetric wind turbine inspired by the Archimedes Wind Turbine Remix by Stuart800. I used three EZO 685 ZZ bearings (outside diameter: 11 mm, bore diameter: 5 mm, width: 5 mm; metal protection on both sides), and I used just a spot of…
BOM: Printed with ROSA3D Starter PLA Red Make your DIY furniture building and cabinet assembly much easier with this precise 90-degree L-corner jig. Designed specifically for standard 18mm thick boards—the most common size used in…
Karabiner is printed in two parts that easily snap together. Some versions of the carabiner require a color change during printing. Carabiners may print differently sized (I typically use a size of 80%). In creating this model, I was…
2022-12-21: I've added a new single blade version which doesn’t require magnets or glue to assemble. 2022-12-21: I've added a new version which only has the page holder and no blades. 2022-12-20: Magnetic bookmark with two blades…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
THIS MODEL IS OUTDATED. There is a newer version available: https://makerworld.com/en/models/550884 There is a more recent version that works better this easy to print wind turbine looks great on any fence post or wall, with the easy to…
Solar Wind Turbine This wind turbine is a remix of the great 3D model from Ivailo ( https://www.thingiverse.com/thing:4635423 ). This wind turbine is powered by solar. Motor and solar panel A solar panel has a size of 65 x 48 mm (3 V DC,…
The model is slightly oversized but can be scaled down if needed
This ratcheting cable clamp / carabiner is extremely easy to print (no support, print in one piece) and works great with PLA, PETG or other materials. I am using it also on the beach to carry my flip flops around by ratcheting them to my…
This is a robust 3D printed carabiner with higher load capability and better gate function than most other 3D printed carabiners out there. Obviously these are not for climbing, they are plastic. If you depend on this carabiner to save…
A fast spinning water turbine to be directly screwed into the water tap. It really spins like crazy. My children love it as bathtub toy. The turbine has some power but low mass, which renders it exciting but harmless. Anyways, keep your…
Pelton turbine created with Autodesk Inventor Category: Engineering
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is my 3rd Rendition in a series of locking carabiners I've designed. The…
You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…
Simple cabinet door latch. I made this to help keep a loose door from swinging open. It is easy to install, just mount the catch to the cabinet door frame, then mark the mounting point for the ball. If you need some wiggle room, I made an…
Ce nouveau support bobine est plus long que l'original et vous pouvez placer 2 morceaux de tube PTFE pour faciliter la rotation de la bobine Ce modèle comporte déjà des supports d'impression sur ça la partie supérieur et sont à enlever…
Aufbewahrungsbox Küchen für Maggi, Knorr oder ähnliche Tüten. Die Box hat standardmäßig eine Breite von 17cm. Kann aber einfach mit dem Slicer deiner Wahl herunterskaliert werden auf die gewünschte Breite. :) 13cm breite für große Tüten…
Open Source Vacuum Turbine Module (Fully Printable) This is a fully printable, open-source vacuum turbine set designed to be easily incorporated into your own projects. Whether you are building a custom vacuum, a fume extractor, or…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED 7/11/24] “Fishie” the fish-themed shoe…
BOM: Printed with ROSA3D Starter PLA Red Expand your 3D-printed woodworking toolkit! Following our popular L-corner jig, this precise T-joint assembly jig is designed to help you flawlessly connect intersecting standard 18mm boards at a…
This 3 part shoe rack is for saving space in a cabinet/closet. The inner width of the model is 135 mm, the height at the front is 84 mm and at the back 175 mm. You need to print the right and left parts with support for the pins. The top…
The model is about 8 cm in diameter. It serves no other purpouse than rotating in the wind and looking cool. The design uses a 608 bearing in the center of the turbine. All the parts should be idealy printed without support, especially…
A combined desiccant and hygrometer holder that slips into the pour hole of the lid of a plastic dry goods box. I like this approach as it is neater than using baggies. With this setup, I can get internal humidity down to 10-15%.…
Overview Complete design of Ugrinsky Vertical Wind Turbine Generator. The Ugrinsky Wind Turbine is a vertical-axis wind turbine designed for strong low-speed performance and reliable torque. One of its standout features is its low startup…
