Liczymy pasujące modele…
3 Part Celestial Dial Pendant from Bloodborne. Modelled at 10cm diameter. Probably will turn out better with a resin printer but I printed this with ULTRADETAIL setting in prusaslicer and it turned out nice.
Happy Halloween! One of my favorite games as of late has been the RPG Bloodborne. 7 years later, and it still holds up. I love the Gothic atmosphere of the game, the challenging gameplay, and more pertinent to my little hobby here, the…
Re sculpted this helmet based on the models from Jedi Fallen order. Feel free to use/modify/sell prints along as you credit me and link back to here. Just don't sell the file.
This is a big, big boy. When I modeled The One Reborn, I was taken by surprise that I would need a gargantuan base of 8 inches in diameter to truly capture the scale of that creature. When I made the Amygdala however, I KNEW I would need…
Yeah. Kind of getting out of hand now.
A keychain of the Hunter's Mark from Bloodborne made by From Software
Boeing 737 Airborne Early Warning and Control This is a printable model of Boeing E-7 AEW&C aircraft. You may need to scale. The pictures uploaded printed at half scale. Too much scaling can be destroy some parts, you should be aware of…
VJM787 made a fine detailed model of the ASU85. Unfortunately it is not printable in smaller scale, especially the tank track fall apart. I liked to make it printable for a future project, so I did. On CAD-screenshoot you can see all red…
Based on Earthborne Rangers - Organizer by CaseW0Lf (https://www.thingiverse.com/thing:6187016).
U.S. Army Airborne Badge Wall Art 8.3 inches x 4.1 inches Model is sized to print on a standard Ender 3 but can easily be scaled up/down.
Remix of the great models of Pfelpensson & somtec (see source section below) The truck cabin was modified to airborne version of the GAZ66. The Zu23-2-canon is a fixed one with strengthening at some places, to be able to print. Sized for…
The box contains 4 smaller trays. Two for all the game tokens and two for the energy tokens besides the aspect cards (easier management and no displaced tokens). Print: 1x “ebr_box_lid” 2x “ebr_ins1” 2x "ebr_ins2" Printed on Creality 6-SE…
This model was right at the top of my list for a while now. While the Orphan of Kos is a much harder final boss than this guy, the Moon Presence wins in terms of visual appeal. I went into this project thinking it was going to be an easy…
Version 1 of 2 for my brainsucker bust, version 2 found here with a large tentacle instead of a stitch towards the back of the head. Comes in 2 sizes and is pre-supported. For more sculpts like this, check out my twitter for new models…
You are in for a real treat. I've been on a modeling binge, and that is mostly in preparation for something special I'm doing this October. Modeling the Cleric Beast was part of that. This model actually turned out much easier than I…
Happy Halloween! Well, it's finally over. My last boss from Bloodborne: The Old Hunters, and my most favorite out of all of them, is the grotesque man-horse Ludwig. This wasn't my most challenging sculpt out of the five, that honor goes…
"A corpse should be left well enough alone." Out of all the five bosses from the DLC, I think Lady Maria was the most challenging to sculpt. It's simply the level of detail in her clothing that did it. Unfortunately the last week for me…
With the release of the Huntsman models, I realized I should step outside my comfort zone and start modeling enemies with clothes. This is especially true if I want to do Bloodborne bosses such as Micolash, Lady Maria and Gehrman…
Yay! First model of the new year! I was working on this one since late December, and I think it turned out pretty good. The reason why it took so long to release is mostly because I ran out of resin, and had to wait for more. However,…
Представляем вам 3D-модель бойца элитного спецназа ВДВ РФ — военнослужащего 45-й отдельной бригад
This model is compatible with the lego system.
This project was a long time coming. I've been working on this series of miniatures for what feels like months, I started on these even before I worked on the Camp Clearwater miniatures. Part of what took them so long was creating three…
Version 1 of 2 for my brainsucker bust, version 2 found here with a large tentacle instead of a stitch towards the back of the head. Comes in 2 sizes and is pre-supported. For more sculpts like this, check out my twitter for new models…
This chaotic CatDog collection of corpses is freakin' MASSIVE! I actually enjoy this streak of Bloodborne characters that I'm doing, so I figured I'd get one of the harder ones done and over with. The One Reborn has similar concepts from…
And the Bloodborne characters just keep on coming! This is probably going to be a pattern from now on, modeling these characters is just too dang fun! The Snatcher, or Kidnapper as they are also known is a enemy in the game that really…
Align, sandwich, and glue three parts, you're good to go. You can hang it or snap a 15mm magnet at back to attach anywhere u want. I was giving it out for free on Katsu, but every hoonter should have one.
Used in the Soviet army since the early 70's. DPP40 stands for Desantniy (airborne) Pontoon Park, 40t, what is the maximum vehicle weight, the system can carry. I’m not a military expert, but my first idea, when reading about was – if…
Insert pro deskovou hru Bloodborne verze 2 (drobné úpravy) i pro figurky.
This is a holder for Börner (Borner) V3 mandoline slicer and its accessories. It securely holds the main plate (held in place using integrated spring lock) with slice insert plate installed, two julienne insert plates (3.5 and 7 mm) and…
This was a super easy one. I looked forward to modeling this creature from Bloodborne for quite some time, not only did it have a super easy design to model, but the Celestial Emissary is simply a larger version of the regular minions. I…
Also called a Borneman template or a big Al, this is a tool used to layout tenons and mortises for timber framed structures. Here is a playlist on how to use it: YOUTUBE Not my work, just handy. The base is sized for M3 heat-set threaded…
Ah, Kos, or as some say, Kosm. You and your poor wizened child were an interesting sculpt. My penultimate release of Bloodborne DLC bosses is the final one in the game. The Orphan of Kos, despite being a medium-sized creature, is a fast…
This was a predictably easy one, but not without its challenges. While modeling the main body of this creature wasn't that hard, I ended up using blender's cloth simulation to make the creature's loose skin, which was only difficult…
Maybe I should've saved this one for Halloween. This model was actually being worked on before I switched my focus to the Camp Clearwater miniatures, but when I came back to it, I decided to try out a feature of Blender I haven't used in…
Here is my second The Old Hunters boss. Honestly, this character is the reason I was dragging my feet on modeling the standard Cleric Beast. When most Bloodborne players think of Laurence, they think "Cleric Beast, but he's on fire", and…
This guy was a really hard one to sculpt, I hope you like it. From a creature design standpoint, Darkbeast Paarl was one of my favorite bosses in the game. A skeletal werewolf that harnessed electrical power seemed like such a cool…
This is a for the MILLE BORNES card game. The lower part of the box is a very simple print. No supports or anything special. The lid is printrd facing up and requires supports to allow for the color changes that form the logo. The…
A highly detailed WWII airborne soldier featuring a combat uniform, paratrooper helmet, field gear, and rifle. Inspired by the legendary airborne troops of the Second World War, this figure captures the look of a battle-ready paratrooper…
Wow, this is my 50th upload! In hindsight, I should've saved the Cleric Beast for that milestone. I have a huge project coming next month, but for now, I wanted to upload some of my smaller stuff. After I modeled all the Huntsman…
I have used gaussian splatting to create digital 3D model out of original figure for another boardgame.
Took inspiration from https://www.printables.com/@Jerryie and started cutting up vehicles from https://www.thingiverse.com/thing:3553160 It is scaled to 1:72 same as https://www.printables.com/@Jerryie tanks.
This is just a placeholder for now. You’re free to download the STEP file, but fair warning—it might be confusing. The assembly requires additional parts for proper securing. I’ll share more details here when I have time (which won’t be…
Remix of this silencer but including slots to hook a badge holder so that your silencer doesn't take off on you.
It was surprising how much I struggled with this one. What made the brainsucker more difficult than I thought was the Cthulhu-like tentacles on its face. On the creature in game, they would have been way too thin to print properly, even…
I replaced the card board tokens that came with the game with the following: energy tokens: 25x7 mm colored wooden disks from Spielmaterial.de (I only have 6 per color, but there is space for more harm tokens: 10x 12mm red dice progress…
Here are just upgrade for general, harm and progress tokens for this wonderfull game. I know that authors wish to make reusable game. So please use like me PLA plastic at least. Sorry, but I just wanted to have some thicker tokens and…
101st Airborne Patch Plaque that I designed for going away gifts or wall art. I hope you enjoy!
Case for the "Mille Bornes" Game Category: Games
Each file is designed to hold two sets of the deluxe token upgrade. It wont work with only one set. Designed for second printing box storage which I believe has different cardboard box dividers. If you dont have the second printing,…
Boeing_737_AEWC wedge tail
Holy Kos, this one was hard, hard, HARD! I was super excited to do this one, Ebrietas was one of my favorite bosses in the game. I was expecting a challenge, I even knew ahead of time how I was going to tackle some of the more difficult…
Insert creepy singing here After sculpting Vicar Amelia, I was inspired to make miniatures of other Bloodborne characters, and the first one that came to mind was the Winter Lantern. This freakish thing drove players into a frenzy…
Happy October everyone! This Halloween, it will be one year since I started modeling Bloodborne stuff. I haven't even finished modeling all of the bosses yet, but I do have the rest planned. But for now, I'm turning my attention to…
This is a simple organizer for Earthborne Ranger board game. I find that the original insert still causes my cards to get messy and tokens hard to remove. This project is still work in progress! I will keep adding boxes and dividers, so…
Insert for the Bloodborne: The Board Game core/base box, sleeved with medium grade sleeves (Sleeve Kings). Sizes are in CM, so the slicer may ask you to auto-resize, just accept the prompt. Created with my insert generator using Blender's…
Separator "sleeve" for the game separator cards. (1st edition) The cards, 70mmx89mm, are too short to be readable and properly separate the cards. Printing: For the best result without stringing and nice lines, print straight up, add…
82nd Airborne Div. Patch Keychain
Not the original designer, reuploaded here for visibility. If you like the model please support the original author at the Thingiverse link below. A box organizer for Bloodborne: The Card Game by CMON. This is for the base game and The…
Modeling this creature was almost therapeutic in a way. After the long and complicated process of modeling Ebrietas, I needed something really simple. This was about as simple as you can get, modeling this creature was pretty much stress…
Just a basic keychain design based on a bigger project we have been working on. Works perfectly with 25mm keychain rings. Print instructions 0.15mm layer 218 nozzle 60 bed 20%infill
Une platine pour transformer un vieux minitel 1 en borne d'arcade vintage. 3 boutons poussoir et 1 Joystick. En PLA.
These are my Airborne intellect devourers. These models were made for a fellow Patron of MZ4250 Thingiverse Printables who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250…
Link to the model it pairs with: https://www.printables.com/model/143850-kelsier-daggers-mistborn%2Fcomments
Dolores Claiborne - 1995 3D printable model. Super easy to print. This is a large model and will take a long time and a lot of material to print.
This one took longer to release than it should have. My apologies for the sparse updates, a lot of rl stuff has been getting in the way. Normally my creation process is switching back and forth between a boss from the game and a regular…
The boss Lady Maria, from Bloodborne. Generated in Midjourney Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Overture Black Transmission Distance: 0.6 PLA Overture Cement Gray…
Börner Borner slicer multibox organizer
Inserto preparado para que en la caja base queda todo el contenido del juego + la expansión de la pesadilla del cazador.
I almost forgot about this one in all the excitement. This was a model I planned to release last month, as it was a scary enemy in its own right. So much has been happening to me right now, I completely forgot about releasing this model…
Introducing our stunning 2D wall art featuring the majestic Pegasus soaring gracefully amidst billowing clouds. This intricately designed CAD model captures the ethereal beauty of the mythical creature, making it a captivating addition to…
Bloodborne Logo Frame Game. 0.2 Layer; Red and Black colors, single and dual print; No supports; No brim; 15% infill.
Boite de jeu de carte pour Mille Bornes avec sabot
Borne SNCF a l'Echelle HO 1/87. modèle a imprimer avec une imprimante SLA (résine)
An artifact "From the history of the ancient world"...
Combined and adjusted inside the .3mf file, all .stl are originals from their creators - unadjusted. - [Box with inserts from @Felix_1103737 on Printables](https://www.printables.com/model/543038-earthborne-rangers-boardgame-token-box/):…
Dimensions (mm) : 27 x 46 x 126 I used around 16 grams of filament, supports must be enabled
Simple insert to hold aspect tokens, meeples, and dice. Designed to fit a US box, with different manufacturers other regions seem like they are more likely to have measurement differences. Token holder stores 40 tokens, but the idea is to…
"He doesn't need a plane to touch the sky!" Complete the State Home Seven with this high-fidelity, static-pose figurine of Windy Winston . This model is a definitive tribute to his 1987 cinematic appearance, capturing the bulky, rotund…
This isn’t just a 3D model—it is a conduit for raw, unbridled chaos, forged in the heart of a dying star and tempered in the blood of the abyss. Behold the Shadowforge Fire Shuriken ; a masterpiece of dark engineering that defies the laws…
Um einem alten PC-Netzteil eine sinnvolle Bestimmung zu geben habe ich ein neues Gehäuse entwickelt. Zusammengehalten wird es duch Gewindestangen es können auch lange Schrauben und Einschmelzgewinde Verwendung finden. 3 Digitale…
This are long feet for the Laboratory Power Supply of Oubel. Print 2 of them. Find the Laboratory Power Supply of Oubel on Amazon: https://amzn.eu/d/eW0wxDu
Box for the Mille Bornes Express Card game, made for sleeved cards. Also holds the instruction manual if you fold it.
il vaut mieux imprimer le modèle en filament flexible (TPU). si vous l'imprimer en filament dure je pence qu'il faudra prévoir un ponçage.
I got really bored and decided to make a functioning Rakuyo for my own amusement and just to have. Currently a work in progress as I only have the basic dagger prototype done and am finishing the saber part. Not many details yet as I…
“Galeheart Archer – The Wind-Borne Marksman” is a dramatic fantasy character statue capturing a skilled archer frozen in the perfect moment of release. With one knee lowered and the other foot firmly planted, he draws back a jagged,…
Explore the unique 3D model of Zorblins Airborne Mini Pose from Hobbies & Games available at The Free Heathen Workshop. This model offers a detailed representation of the perfect fantasy gaming character - a Space Goblin, ready to assail…
Protector de bornes para la batería LG usada en los coches de VW. Protege el borne de contactos accidentales cuando es utilizada como almacenamiento solar, etc.
Arctic Airborne Unit Patch Plaque that I designed for a going away gift or piece of wall art. I hope you enjoy!
This keychain was inspired by a bigger project we have been working on for a while and will be used as a giveaway at future Maker Faires and STEM events. It woks perfectly with the Paxcoo 200Pcs Split Key Rings Bulk for Keychain and…
This design replaces each of the 24 challenge cards in Earthborne Rangers with a matching disc token which conveys the same information as a card: Stat modifiers (awareness, spirit, fitness, focus) Activation (sun, crest, mountain)…
harabarurel's excellent models combined as one easy-to-print multicolour 3MF Brown - the red challenge cards; purple = blue; gold = yellow. Doing it this way allows you to choose a different filament for the three card types to the…
“...We are born of the blood, made men by the blood, undone by the blood. Our eyes are yet to open..." Design Highlights Reinforced Loop: Extra-thick attachment point to ensure the keychain survives daily wear and tear on your keys,…
Stencils for making card game playmats (specifically for Earthborne Rangers)
This is a Xbox Series S cover, themed Medal of Honor “Airborne”. It includes- parachute image on the top and Medal Of Honor Airborne logo please enjoy. this is a 8-9-½ hour print in total. please like it, download follow me, or share a…
Dimensions (mm) : 12 x 107 x 177, I used around 23 grams of filament, supports must be enabled
Tool available here: https://www.panhandleleather.com/products/c-s-osborne-mini-punch-set
I designed it as separate detail so there won't be any problem with floating regions and supports. It just clicks in place.
It works great. Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message. Category: DIY
