Liczymy pasujące modele…
This is an easy print that will allow you to secure an airtag to your bike. You will need 4 15mm M2 screws and nut to assemble it I have provided design files so you can fit it to a different saddle, the desing has 3 adjustable…
Part to replace the "whistle" on my son's bike horn/trumpet. Can also be used like party horn with the additional tube. Assembly instruction here https://www.thingiverse.com/thing:1168279 Pièce pour remplacer le “sifflet” du klaxon /…
This is a chain guard for the old BTWIN Rockrider 5.0
Un protège pédalier pour B-Twin Original 5. Par rapport à l'original, celui-ci est plus grand et plus solide. Je ne sais pas s'il est compatible avec d'autre modèle. Probablement pas.
partie arrière du support des miroirs de vélo btwin
I had a few of these bikelights broken in the same way so that i could not use them on my bike anymore. I made this part to fix them, you just have to sick the part on the light using superglue and the part has a hole so you can put a…
[EN] It's a mount for a BTWIN light. It's supposed to go mounted on the handlebar, but on a road bike it's difficult sometimes, so i made a mount that can be attached to any GoPro hook, for example under the GPS mount of the bike ( the…
I printed it in prusament ASA jet black to have a higher temperature and UV resistance. It is designed to mount it on a stem with a diameter of 32 mm. The part it self has a ID of 34 mm, because of the rubberinlay. needed materials -the…
Keep the light and the reflecting glass, transform the cheap rear frame light to a multipurpose clip light, suitable for btwin saddle bag. Print in translucent red for maximum light, to be visible from the side also! Designed in…
Réparation pour vélo Decathlon BTwin Tilt 500. Clip permettant le maintien du garde boue sur son arceau de support, sans faire appel au système de vis original hyperstatique qui à conduit à la rupture. Pièce conçue pour une fabrication en…
BTWIN VIOO compatible light holders for Prusa i3 MK2/3/3S/3S+ Need support for better print. Remixed: https://www.thingiverse.com/thing:3264453
This is a little piece that takes advantage of the little gap in the btwin bike light clips from Decathlon and prevents them from falling out. I had already lost one and haven't had any issues with it installed ever since. Printed at…
A frame mount for the Btwin 500 D lock, sized for a 35mm Frame tube, but may fit others. Fixes to the frame using cable ties and has a slot for a velcro (or other) strap - Recommended! When mounting, I also put a little cloth tape on the…
Pour ceux qui ont une Trottinette Laotie ou une Angwatt C1 ou F1 comme moi, et qui ont un cadenas en U Btwin 920 de chez décathlon de 1,717 kg ben voici un support pour le centrer sur la colonne de direction. La partie avant est à…
I created this part to replace a missing part of my BTWIN 900 track pump. This fits inside the Schrader end of the inflator and is held in place by the rubber gasket. Elegoo Neptune 4 Pro PLA+ 0.4 nozzle 0.2 layer height
A simple bottle cage adapter for the 20" Decatlon Btwin children bike. The downtube dimensions are 34 x 50 mm. Print it upright on the flat sections. No supports needed. Printed of TPU (it would have needed drying, but the idea came the…
Quadlock adapter/mount for the “Decathlon BTWIN Ultralight 1 Second” How to Print: Pause Print at 6.2mm, add the m5 hex nut and resume. Support for the overhang required. Installation: Remove the rubber stem cover to get to the hex screw.…
Printed with supports on the bottom of the fins, I used 3M double sided tape. Gluing is probably a more secure approach.
My old TITL 5 bike had a button-cell rear light. I was interested in replacing it with a newer system that had a rechargeable battery. The Vioo Clip system has multiple lights available in various sizes. This adapter allows you to install…
The base needs some support at the hook. I printed it in Geeetech wood PLA, base with 3 perimeters, basket with 2.
Holder for my Btwin 500 24mm diameter bicycle pumpe in my Canyon Neuron frame. Snug fit, no play, no escape.
I created this part to be able to install a better headlight. All standard headlights can be mounted. I made the top hole for the headlight bracket, the middle hole is for the original screw that came with the original headlight, and the…
Clamp for a Decathlon btwin usb backlight with unkonw part number. You would need rubber bands to attach the light. Printed with supports.
The Tern front carrier is very expensive (£160); while this BT-Win rack costs about £25 at decathlon. https://www.decathlon.co.uk/p/front-b-clip-ready-bike-carrier-for-the-e-three-500-cargo-bike/377780/m8985760 It doesn't fit perfectly so…
I printed the chain guard from the https://www.printables.com/model/151726-chain-guard-for-btwin-rockrider-50 webpage, but the mounting points weren't right. I didn't want to reprint it (waste of filament?), so I designed an accessory…
Quadlock adapter/mount for the “Decathlon BTWIN Ultralight 1 Second” How to Print: Pause Print at 6.2mm, add the m5 hex nut and resume. Support for the overhang required. Installation: Remove the rubber stem cover to get to the hex screw.…
Printed with supports on the bottom of the fins, I used 3M double sided tape. Gluing is probably a more secure approach.
The BTwin speed 900/920 type bikes have no direct mounting holes for a lock. This model van be mounted to the bike with zip ties and provides mounting for a lock via the slots that take an M4 nut. Necessary hardware: 2x 15mm M4 bolt 2x M4…
The fender for 16'' wheel. I was not able to find a suitable fender on the market. All of them are too small for the rear wheel and riding on wet ground. So I modeled it. Split it into parts in Orca, and print ABS. 100% infill is…
This is a short, front mudguard for Btwin Elops 500 singlespeed bike s, but i belive it is compatible with most bikes that have a front bolt that secures the brakes. It connects to the bicycle via the front brake bracket. To install,…
Fits on B'twin Rack'n ride 520 trailer hitch mounted bicycle carrier. I have lost one of the wheel mounting fixture, so designed a new one instead of it. The crossbeams on the pictures are custom made, longer version to fit XL size…
A handy holder for the Decathlon BTWIN 120 cable lock. Fits under the back of the seat. Print settings: 3 perimeters 0.2 mm layer height no supports PETG or ASA recommended. Required hardware: 2x M3x12mm 2x M3 hex nut
