P
PrintablesPhipsy
Carcasonne Big Box (3.0) Meeple and Addon Boxes
Pretty boxes to replace the ugly plastic bags in your Carcasonne Big Box (3.0)
- Pobrania
- 388
- Polubienia
- 75
- Ocena
- 5
Wyniki wyszukiwania: caso
Liczymy pasujące modele…
P
PrintablesDorus
Carcasonne big box case
Carcasonne case made out of 3 parts. -bottom where all the cards fit in -a shelf for all the woode figures -and a lid wath a scoring board. the lid is quite snug so you need a clean print
- Pobrania
- 216
- Polubienia
- 45
- Ocena
- 4,67
P
PrintablesKricki
Portafilter holder for Ascaso Steel and Baby T
Holder for portafilter to be attached to the side of the Ascaso Steel. The mount clips onto the metal bar on top the machine. Print instructions: Print holder + 2x mounts. Orientation as shown in the picture. 3 walls, 10% infill I…
- Pobrania
- 154
- Polubienia
- 18
- Ocena
- 4,8
P
Printablesrasmus
Carcasonne tile grid for Ghosts Castles and Cemeteries / Mist over Carcassonne
The tile grid from timqui have been modified to contain the large 2x2 tile for Ghosts Castles and Cemeteries / Mist over Carcassonne
- Pobrania
- 138
- Polubienia
- 17
- Ocena
- 0
P
PrintablesCombinatrix
Ascaso Portafilter Stand for Niche Zero
The other Niche Zero stands did not fit properly my Ascaso bottomless portafilter, so i made another one. Still holds the Niche Zero dosing cup and can also be used with the standard double spouted Portafilter, although not hands free.…
- Pobrania
- 123
- Polubienia
- 14
- Ocena
- 0
P
Printablesmikevill1
Carcasonne Big Box
I was looking for a Carcassonne Big Box container and didn't find any that quite met my needs, so I designed this one. It holds all of the pieces and includes custom individual scorecards. This includes the base, lid, scorecard, scorecard…
- Pobrania
- 95
- Polubienia
- 8
- Ocena
- 4
P
PrintablesDrebinWorks
Ascaso Steel - Portafilter holder / Tamperstation
A simple tamperstation for Ascaso steel portafilter. Works well with the classic portafilter and the bottomless one. Printed with SUNLU Black PLA and Polyterra Blue PLA Added the code for the speed profile. Perimeters 3 Infill 25 %…
- Pobrania
- 82
- Polubienia
- 18
- Ocena
- 4,5
P
Printablesbasti315
Ascaso STEEL UNO/DUO Water Tank Upgrade
My parents complained about the gap above the water tank of their new Ascaso STEEL DUO espresso machine. Flies and dust would occasionally get into the water, presumably through this hole (more holes on the back for pressure/steam relief…
- Pobrania
- 77
- Polubienia
- 11
- Ocena
- 5
P
PrintablesFabNera
Carcasonne tile dispenser
[fr] Distributeur de tuiles Carcassonne Voici une boite plus fonctionnelle pour vos tuiles du jeu Carcassonne. Cette boite contient toutes les cartes du jeu de base, ainsi que celles de l'extension "Rivière". L'angle de cet étui vous…
- Pobrania
- 68
- Polubienia
- 24
- Ocena
- 0
P
PrintablesDiederik
Ascaso Steel portafilter funnel
Funnel designed for a 2013 Ascaso Steel Duo portafilter Might fit other models Locks onto the portafilter with a clockwise twist Print upside down for optimal result
- Pobrania
- 59
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDr.Daniel
Portafilter Stand for Ascaso Steel Auto-Leveling
I wanted a nice looking portafilter stand / tamper station which supports my portafilter and levels it horizontal. I am using it now for two years and it works perfectly. I printed in PLA but other materials should also be fine. During…
- Pobrania
- 54
- Polubienia
- 6
- Ocena
- 0
P
Printableslromandine
Carcasonne Big Box (3.0) Meeple and Addon Box Tray (2 versions)
This tray is designed to fit the boxes designed by Phipsy and the tray fits in the Carcassonne big Box 3.0. Holds all 7 of the boxes and the tray itself is friction fit in the box. The smallest box can fall out if the box is upside down…
- Pobrania
- 50
- Polubienia
- 8
- Ocena
- 0
P
PrintablesKaoZ
Ascaso Steel Portafilter Stand
Remix of Ascaso Portafilter Stand for Niche Zero by Combinatrix I have adjusted the size so an Ascaso Steel series portafilter stands perfectly straight for tamping. designed for PM.529, with two outlets, but should also work with the one…
- Pobrania
- 50
- Polubienia
- 12
- Ocena
- 5
P
PrintablesSubSite
Spill Tray for Ascaso i-mini Coffee Grinder
This thing completes the otherwise awesome Ascaso i-mini coffee grinder. I use some Blue Tack to keep it in place. Originally published in 2018: https://www.thingiverse.com/thing:2808554 Category: Kitchen & Dining
- Pobrania
- 45
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRicardo
Plantilla Bisagra Casoleta 35mm
Plantilla para la instalacion de bisagras tipo casoleta de 35mm
- Pobrania
- 33
- Polubienia
- 5
- Ocena
- 0
P
PrintablesICEWING 177
Vautour jet bomber (SNCASO S.O. 4050)
The Vautour jet bomber. A personal favorite of mine. The holes in the bottom are for landing gear, which I later added but did not put to much work into, so try at your own risk! Category: Vehicles
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
Printablesvivacello
Ascaso Coffee Filter Repair
My friend's Ascaso filter for the coffee grinder broke. Here's a fix!
- Pobrania
- 31
- Polubienia
- 1
- Ocena
- 0
P
PrintablespapstFish
BLTouch CULPA V2 - PECASO (Pretty enhanced CuLPA Assembly with Spider and Orbiter)
--- Update: I added the files for the use of the Orbiter V2.0! The hotend position and thus the Sled and mount for the hotend cooling fan have changed. Have fun! --- This is my current Setup based on the CuLPA V1 (with Orbiter V1.5,…
- Pobrania
- 30
- Polubienia
- 6
- Ocena
- 0
P
PrintablesWillJinks
ACASOM 915MHz Cavity Filter Cap
The 915MHz cavity filters from ACASOM are a bit spikey because of the exposed screwheads poking out the top. I wanted to use one with a FemtoFox but was worried about the exposed bits damaging something else in the enclosure and made…
- Pobrania
- 26
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDr.Daniel
Cup Spacer wide suitable for Ascaso Steel Duo
I designed a spacer that keeps cups that are stored on the Ascaso Steel Duo in place. You need to print it with at least PETG not with PLA since PLA will deform due to the heat. Print it without bottom and top layers to get the grid…
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
PrintablesChorche
Ascaso Steel Duo SnapOn Steam Lever
i got frustrated by the steam knob of my Ascaso Steel Duo. I found some lever STL files, but those required disassembling the knob, which is a pain in the … So i designed a snap-on Lever. Its pressure fit, but in case you want it to fit…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
Printablesbana
Caso VC100 button right replacement
Replacement of the right button for the Caso VC100 vacuum sealer
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMartijn
Ascaso I-1 chute
The original plastic chute of my Ascaso I-1T broke, so I'd thought, let's create a new one. It's my first ever created 3D model. It fits, does the job but certainly isn't perfect. Feel free to remix, edit, etc.
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGuus
Ascaso steel thermometer ESP32 replacement
Ascaso steel series ESP32 Dial replacement intended for older ascaso models (<2015) but it might also work for newer machines. Two parts are required: 1x LilyGO TTGO T-Lite W5500 ESP32 - with OLED Display 2x 2.5M screw between 10mm and…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCS 3D Design
Ascaso Dream milk frotter knob
Replacement knob for Ascaso Dream espresso machine Printed with PC filament might work with nylon or ABS/ASA. Printed in PETG at first as its was the most thermal resistant filament I had on hand and the part deform after a single use of…
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJoost
A modified steam pipe clip for the Ascaso Dream
This is a little clip that is modified from the origin one, it is a bit bigger and hopefully clips better to the steam pipe. The plastic becomes brittle after some time due to high temperature differences... So print a few and you're…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBasti´s_3D_Druck
Ascaso Steel Uno PID Ersatz Tank
Ein Ersatztank für eine Ascaso Steel Uno PID Maschiene Am besten in PETG drucken
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesICEWING 177
Narval (SNCASO SO.8000)
SNCASO SO.8000 Narval. Category: Vehicles
- Pobrania
- 13
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBgnome
Ascaso Grinder Square Nut Tool
It was designed to be used with or without the top burr in place. I use a screwdriver to brace against the sweeper of the lower burr and a pair of pliers on the top of the tool.
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 5
P
PrintablesJavacer
Picaso Spoolholder
Picaso 3D Design X v2 Spoolholder Print the paft fron PETG 0.2 or 0.15 layer. Use air gun balls as bearing balls.
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDr.Daniel
Cup Spacer suitable for Ascaso Steel Duo
I designed a spacer that keeps cups that are stored on the Ascaso Steel Duo in place. Diameter of the cup hole is 62mm. You need to print it with at least PETG not with PLA since PLA will deform due to the heat on the machine. It is…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesmoosepilemini
13 piece metric hex bit socket set tray CASOMAN CS014
Little tray for Casoman CS014 from amazon. 13 piece ¼,3/8, ½ hex socket set
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJavacer
Picaso Spoolholder V3
Picaso 3D Design X v2 Spoolholder V3 with ballbearing. Print the paft fron PETG 0.2 or 0.15 layer. Use ball bearing 61805 2RS ( 6805-2RS) 25x37x7.
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCalvin Sze
Mercasoba
Mercasoba is a super low-tech soap mold for card magicians to load a signed card into a transparent soap bar. A card is selected and its face signed by a spectator. It is then returned to the deck. After shuffling and returning the deck…
- Pobrania
- 9
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSitti
Abstandhalter für die Ascaso Kaffeemühle i-1T
Der Auslass für das frisch gemahlene Mehl der Ascaso Kaffeemühle i-1T trifft nicht exakt den in die Vorrichtung gelegten Siebträger, wenn der An-/Aus-Taster betätigt werden soll. Mit dem Abstandhalter wird dieses Problem behoben.…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTomasz Chaj
Carcasonne tower for tiles
Tower for storing tiles during the game. Two-piece model, easy to be modified with additional features or design. I also added places for magnets to connect them, but never used it anyway. For all tiles from base game you will need at…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesZDickinson
Case for Ultrapeater and Acasom Filter
Print the case out of your favorite UV resistant filament and the gasket out of TPU. Buy an Ultrapeater: https://zindello.com.au/shop/ultrapeater-e22p-hat/ Acasom cavity filter:…
- Pobrania
- 6
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJimmerJammer
Carcasonne Hunters and Gatherers Tile Holder
Designed to hold tiles for Carcassonne Hunters and Gatherers. Holds: 16 menhir tiles 5 extra scoring tiles (50/100) 1 start tile Print Settings Printer Brand: LulzBot Printer: Mini Rafts: No Supports: Yes Resolution: .38mm layer height…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSimone Mariano
Wall Plate " Em caso de encrenca"
3D model description Pokémon sign, written in Portuguese "In case of double trouble, surrender now or prepare to fight" 3D printing settings Printed on PLA,3 colors, non-support, easy to print.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTranbert
Ascaso grinder flexible TPU dosing cup holder
I made this cup holder so it locks in nicely while you’re grinding coffee, but still pops out so you can grab the coffee stuck in the spout — no gym session required. Print it in TPU only, then warm it up gently and bend it to match your…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesdnesteruk
Picaso Designer X Pro improved guide
My original guide shattered after heavy use, broken along the filament lines, so I decided to redesign it taking this into account by adding reinforcement ribs. Also, because I use an external eSun eBox, I added a hole for a third guide,…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNanda
Ascaso Dream Tamperstation
I printed the original at first, thinking the Ascaso Steel and Ascaso Dream would probably have the same size portafilter. However their sizes turned out to be completely different. I adjusted the model, but also added another 'level' to…
- Pobrania
- 1
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSoguwe
Caso Design Microwave Accessories Wallmounts
Wall mounts for your Caso Design microwave accessories
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAynce
Ascaso Steel Brush Holder
The size of the hole fits the niche zero brush. If you need a different size, you can create it with the included scad file. Or you can leave a comment with the request size, than I can add it here. For the scad file you need the…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Ascaso Steel - Portafilter holder / Tamperstation
A simple tamperstation for Ascaso steel portafilter. Works well with the classic portafilter and the bottomless one. Printed with SUNLU Black PLA and Polyterra Blue PLA Added the code for the speed profile. Perimeters 3 Infill 25 %…
P
Printables
Ascaso grinder flexible TPU dosing cup holder
I made this cup holder so it locks in nicely while you’re grinding coffee, but still pops out so you can grab the coffee stuck in the spout — no gym session required. Print it in TPU only, then warm it up gently and bend it to match your…
P
PrintablesArtoys3dprint
Wolfenstein Mask & Helmet Fan Art - Casco Segunda guerra mundial - Caso Guerra - War Mask
Mask and helmet from the video game Wolfenstein. This design includes these two STLs: -Mask (with hole to attach to the face) -Helmet with damage details. Printing parameters below. Thanks for stopping by :) Model for personal use only.…
- Polubienia
- 4
- Ocena
- 0
P
PrintablesArtoys3dprint
Shradder Mask Helmet - Destructor Caso y Mascara
Destroyer helmet and mask to be printed separately. Printing specifications below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :) patreon.com/Artoys3dPrint Casco y Mascara de destructor a…
- Polubienia
- 9
- Ocena
- 0