587 modeli
The small parts organizer “Basic33” / VarioPlus Hobby 33 (old version with flat frontface) by Allit is often sold via supermarkets like Lidl as a Parkside product and Aldi and Hofer (Austria) as a Workzone product. They come with a very…
Wydruk około 2,38 €–2,91 € nettoWstępna wycena jednego wariantu
Revisited one of my first designs, made some improvements and settled on the aesthetic of a thicc plant pot, reminiscent of a cauldron. Print upside down, rim on the print bed. A brim might be necessary due to small surface area of the…
Wydruk około 3,36 €–4,11 € nettoWstępna wycena jednego wariantu
This simple fix stiffens up the visor mechanism on early Schuberth C5s and S3s. However, the mechanism has been redesigned and can be fixed by your importer, so I'd recommend you have that done. If for some reason you can't, this is a lot…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Print Tips Material: PLA Layerheight: 0.2mm (BALANCED) Perimeters: 2 Infill: Grid Support: Yes (Automatic)
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
Schublade
Wydruk około 7,64 €–9,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I got this Bobby Car incl. push pole from a friend, but the safety pin was missing. Perfect chance to test my new 3D Printer! After looking online what the pin looked like I took all measurements and began modeling a 3D printable…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
Definition added with paint in PrusaSlicer for printing with XL (or MU3).
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Hier findet ihr einen Lustigen Anhänger für euren Rucksack, Er kann an ein Gurtband oder ans Molle System befestigt werden. Es sind STL in deutsch, englisch oder auch ohne Beschriftung vorhanden.
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
Inspiriert von @araymbox (https://www.printables.com/model/149798-ikea-hemnes-shoe-cabinet-divider) habe ich für die normale Kommode mit einer Tiefe von ~43 cm eine zweiteilige Trennung konstruiert welche mittels Schwalbenschwanz…
Wydruk około 3,72 €–4,55 € nettoWstępna wycena jednego wariantu
I was tired of the towels always being thrown onto the shelf, so I designed a hook on which you can easily hang the towels. The hooks can be attached to the handles very easily and without damaging them. If necessary, these can also be…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
If you want to store your 100 mL measuring flask in a drawer without all of the fluid flowing to the top, this is it. It also helps to get to the liquid with a syringe wihtout having to hold the measuring flask. The total height of the…
Wydruk około 5,53 €–6,76 € nettoWstępna wycena jednego wariantu
Ersatz Handgriff für Mars Svratka Schubladen. Wenn der Griff abbricht und in Einzelteile zerbricht oder in Verlust gerät, dann braucht man nicht die ganze Lade nachzudrucken. Den Griff schiebt man in die zwei Nuten ein welche für die…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Variable spacers for drawers drawer slides. Description : I have built several cabinets with doors and drawers drawer slides for a shelving system. To be able to adjust the width of the drawers there are spacer discs from a manufacturer.…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
>>YouPlaylisttube zu dieser Modell Beschreibung<< >> bilingual/english version availabe as PDF at github Der Pelletwächter ermöglicht es, den täglichen Pelletverbrauch einer Pelletheizung zur erfassen und anzuzeigen. Er warnt bevor die…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Many of you liked my Chubby T-rex model so I thought on making a usable model with it. You will be able to organize your pencils and pens, use as a planter, etc. Super easy print with no supports needed at all. If you like my model check…
If you need a cute desktop figure, then the thick crocodile is just the thing for you. He will remind you that it is always snack time. He is 68mm x 53mm x 50mm Printed in 0.08mm layer height Without support 15% infill The model creator -…
Cute chubby T rex - Desk Decoration
Here comes Rexa, the sweetest little dino from a long-forgotten land of fluff and fun! With a round belly, soft curves and sleepy eyes, Rexa isn’t here to roar… just to melt hearts. Prints in only 27 minutes with minimal supports—perfect…
Meet Nokko, the squishiest little cephalopod ready to wiggle into your 3D print collection! With his stubby arms and round charm, Nokko is the perfect desk pet, shelf pal, or quick gift idea. He’s printed in one go, support-free, and full…
For frog lovers of all ages, this revolutionary amphibious creature is both adorable and simple to print. This model can be printed without supports, although it is recommended to use a raft due to small parts. no assembly required, only…
This is a gridfinity based storage box system I've developed over the last year or so called the Schubox. Please read the following carefully - this is a very filament intensive project and the info below can help mitigate issues that may…
Adorable and chubby T-rex figure. Super easy print with no supports, it has been tested and prints great. Great gift for any kid or adult dinosaur lovers! If there is interest I will be making more dinosaurs in this style :) please upload…
This adorable chubby Pterodactyl is perfect to use as decoration, container or pencil holder. Super easy print with no supports needed at all. This is my second chubby dino, so if you like it check out the chubby T-rex: Chubby T-rex “You…
Since my first pug sculpture has enjoyed great popularity, I'm introducing a slightly chubbier, minimalist version of a pug. The model's standard dimensions are 200 mm x 183 mm x 143 mm (freely scalable). It was printed with the following…
this cat is chubby and fat designed by bigreadbaron on thingiverse.com i take no credit for this model at all i only reuploaded
small chubby cat. designed by bigreadbaron on thingiverse
3D Printing Guide: Vernier Caliper Introduction: This guide describes the 3D printing of a vernier caliper, a versatile measuring tool designed for precise measurements in the two-decimal-point range. The caliper is printed in multiple…
Generell PLA settings in the Creality Print slicer, but because of warping adjust the temperature of the bed to 60 degrees. I use a filament cutter instead of the pincher (see picture, white tool)… you have to decide, pincher or Spatula,…
A decorative piece of a chubby croc He's just a Lil guy fr
Chubby little bee (No MMU required)
This is an enhanced version of Thingiverse user Bigreadbaron's “chubbicat” model, posted to Printables by Printables user colincurtin . In this remix, I set out to improve the original's level of detail using Blender's sculpting tools.…
***IMPORTED FROM THINGVERSE*** Have you scroll up and down all over the internet for something to put your glasses on? well this is the right thing for you!! Print on what ever settings you want.
Diese Schubladen-Organizer sind so konzipiert, dass sie perfekt in die Schubladen des Kallax-Regals passen und zusätzlichen Stauraum und Ordnung bieten. Sie sind in verschiedenen Größen erhältlich, um perfekt zu Ihrem Einrichtungsstil zu…
About the model IKEA Malm drawers are around 70x42 cm. The drawer has been devided into a 6x6 cm grid leading to a total of 12x7 elements. Because of the square grid each insert can be rotated as needed. Elements are provided from 1x1…
More free models on my MakerWorld. This cute chubby panda is an absolute delight. With its adorable appearance, it instantly captures your heart. It is not only a lovely toy for children to play with but also a charming companion in your…
Rino is here to charge straight into your heart! With his round snout, chunky legs and tiny horn, this adorable rhino is the perfect fast-print pal to brighten up your shelf or desk. Designed for smooth, support-free printing and…
Chubby Bird - Cute & Easy 3D Print! 🐦✨ Bring some charm to your space with this adorable Chubby Bird model! Designed for smooth, hassle-free printing, this plump little bird is perfect for decoration, gifts, or just to brighten up your…
Material: ASA (Prusament Jet Black) Layer height: 0.20 Perimeters: 5 Top Layer: 4 Bottom Layer: 4 Infill: 50% Inserts: 1x M4
Say hello to Crabbie, the roundest, happiest little crab on the shore! With his big claws and permanent smile, he’s here to wave his way into your collection. Whether you want a super fast no-support print or a cleaner version with…
Bring charm to your garden or shelf with this cute and chubby garden gnome figurine ! Designed with a minimalist, handcrafted look , this whimsical gnome features a long textured beard , a tall pointed hat that droops slightly at the top,…
Chubby Capy Friends Say hello to the cutest, chunkiest capybara-inspired figures! These little round buddies are full of charm, each featuring an adorable tiny fruit or snack on their heads. Whether you're a fan of capybaras, love cute…
Say hi to Kimo, the ultimate chibi turtle to brighten your print collection! With those big eyes and soft, squishy shape, Kimo brings instant joy—and prints in a flash, no supports needed! ✔ One monocolor 3MF file ✔ No supports required ✔…
Schubladen für den beliebten Ikea Lack Tisch. Bei mir habe ich 1x große Schublade 2x mittlere Schublade 1x kleine Schublade verbaut. If you like it ----> press like it :-)
Drawer Tray compatible to IKEA ALEX drawer unit Schubladeneinsatz kompatibel zu IKEA ALEX Schubladenelement
Schuberth S3 GoPro Mount I have designed this mount because none of the standard GoPro attachments didn't fit my helmet. I 3D-scanned the helmet to fit the curvature around the chin vent. It is attached with 3M VHB tape cut to shape. It…
Der Halter bietet Platz für 21 Darts. In der Schublade kann man Ersatzteile wie Spitzen, Schäfte und Flights unterbringen. So hat man alles an einem Ort und ist sofort griffbereit. Die Schublade hat einen flachen Boden, sodass man sie…
Schublade Tesla Model Y und Model 3 für die vordere Mittelkonsole. Fächer für Geldbeutel, Kleingeld, Garagentoröffner und Onooo. In Version 5. wurde das Fingerlöch vergrößert.
Say hi to Kilo, the mellow little lizard who’s always vibin’ on your desk! With his squishy tail, plump feet and coiled pose, he’s the ultimate low-maintenance reptile. Print him fast, no worries—just chameleon calm and cuteness guaranteed.
This is a remix of the chubby Croc found here by LegoLars - https://www.printables.com/model/788728-chubby-crocodile. You do lose a little bit of resolution at the 50% scale. But you do gain a cute little chubby Croc that sits on your…
Easy to print Switch game stand for 11 Games. No Support needed!
King Gator has become king and is ruler of all reptilians throughout the land. A fun little toy that you can look at and know who is the king.
My Schuberth C5 came with a Schuberth SC2 Sena compatible bluetooth kit mounting slot, but I already own a Cardo Edge bluetooth kit and I want it installed properly. As an engineer and owner of a 3D printer I did the most sensible thing…
This is a simple print which fills the bed of a mini. To print it on a Prusa mini you have to disable rim, brim etc.
DODGE Widder als einschub , mit loch für den Dorn für abnehmbare AHK gedruckt in 0,2, min. 4 Wände und 35% Infill, in ABS oder ASA
Zur Reparatur habe ich diesen Abstandhalter für unsere gezeichnet
Schublade für das zubhör Creality K1/C alles an zubehör direkt am Drucker Bitte lasst ein like da für die prusameter
This is a cute chubby Korok from the legend of zelda. It has copyright so do not sell it and just use for yourself. It is cute and adorable. Put it somewhere where it can stand if you wish as its so chubby to be in his little legs.
Schubladengriff, Türgriff im Hexagonaldesign. Schraubenlöcher 4mm mit Konus für Senkkopfholzschrauben aus dem Baumarkt. Ich verwende Schrauben wie auf dem Bild zu sehen. Gerdruckt auf MK4 0.2 Speed PLA Perimeter 3x Infill 30% Viel Spaß…
Say hello to the Chubby Puppy—your new favorite 3D print! With its plump little paws, floppy ears, and adorably pudgy face, this loyal companion is guaranteed to bring a smile to anyone who sees it. Whether you're a pet lover, figurine…
This cutlery tray now uses the whole height of the drawer and has more individual separation for small stuff you usually need in a kitchen. The larger models have “wings” to prevent warping. Just cut them off after printing. No support…
Wer schon immer seinen Tee sortiert haben wollte, passt für alle verpackten Teebeutel.
Mini Chubby Squirrel Buddy A tiny and cute chubby squirrel for your desk. It is very small (18mm) and prints extremely fast. Perfect for using up those last bits of filament! Features: Ultra Lightweight: Uses less than 1 gram of filament.…
Einfache, geräumige und stabile Schublade mit Halterung. Massiv und wenig “raffiniert”, dafür alltagstauglich. Die Halterung kann entweder geklebt oder geschraubt werden.
After a dozen scanning attempts, several hours of tweaking settings, and adjusting the mesh and model, I finally achieve “Good Enough” status. Not perfect. Not awesome. But printable, and maybe someone can do something with it. I printed…
Made a quick Botero Pikachu. "Fernando Botero Angulo is a Colombian figurative artist and sculptor, born in Medellín. His signature style, also known as "Boterismo", depicts people and figures in large, exaggerated volume, which can…
Irgendwann liegen einem die Schubladen beim LMC Wohnwagen beim Ausziehen auf dem Boden. Hier hilft nur eine beherzte Amputation der ausgebrochenen Teile und ein Einfügen neuer 3D-gedruckter "Implantate". Ein wenig Nacharbeit mit der Feile…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Introducing “ Stubbs ” and “ Chubbs ", my own design of driver bit handles that…
Hi Ich habe diesen Schreibtisch-Organizer mit Schubladen gemacht, um meinen Schreibtisch aufzuräumen. Das eine Fach ohne Schublade ist für die Basisstation eines SteelSeries-Headsets gedacht. Der Hauptkörper muss in Sektionen aufgeteilt…
Update: Now for 5mm, 6mm, 8mm and 10mm These drawers dividers help to easily bring order in the drawer. No complicated cutting of drawers. Simply cut a straight board of the desired length and attach it to the matching bracket and fasten…
Chube is the greatest and latest hotend in the 3d printing market, featuring a staggering 42mm of meltzone! Chubes packaging doesn't just help create a massive meltzone; it also has a lot of rigidity thanks to the shroud design. These…
This is a functioning model of an 1824 Chubb detector lock. Watch the video to learn more! Required Parts: (1) 25mm x 5mm metal dowel (Glue into frame - the key rotates on this dowel) (2) 30mm x 5mm metal dowel (The detector and levers…
die Schublade mit Support drucken für den Hebel. Rest geht ohne. Box einfach unter dem Tisch kleben oder verschrauben Print Settings Printer: Any I3 S Rafts: No Supports: Yes Resolution: 0,2 Infill: 15 Notes: die Schublade mit Support…
Here is another cute chubby bunny just in case you didn't find enough version to print already :) It's hollow, so maybe you can find another use for it. Enjoy!
Korb Schublade Organizer für Rollcontainer zB H.T.B 70.50mm, 240.50 mm, 115.50 mm.
Cute little chubby duck sitting :) Please feel free to share your prints or printplates with colour, i would love to see them :) NO SUPPORT NEEDED 0,16 layerhight on example Print Settings Supports: No Resolution: 100% Infill: 10%…
Magazin mit kleiner und großer Schublade 1 Magazin mit 8 kleinen Schubladen, Trennwände und Schale Maße ca.: Breite: 13,5cm/Höhe: 16cm/Tiefe: 16cm 1 Magazin mit 1 große Schublade Maße ca.: Breite: 13,5cm/Höhe: 7,3cm/Tiefe: 16cm An den…
Für all die Bonbons, Kaugummis und Pfefferminzpastillen brauchte ich eine Aufbewahrungsmöglichkeit, damit nicht dauern einzelne Schachteln und Döschen im Auto umherfliegen. Deshalb habe ich diese Schublade für meinen Peugeot 207…
This is a Chubby Dino that I made while practicing sculpting I have not printed this yet but I will update when I have it looks like it will be a 3.5-4 hour print and will need support If you wish to sell this design/object feel free to…
Schubladen Organizer für Beta Werkzeugwagen kann auch für andere Schubladen und vieles andere verwendet werden. Model Maße:92mm x 139 und 92mm x 147mm Gedruckt mit PLA oder PETG 10% infill Drawer organizer for Beta tool trolley can also…
Fat cat Follow my IG ▶ https://www.instagram.com/ningworks/
I created this drawer dividers. Just print a few of them and then put them together crosswise so that they form individual compartments. This means you can choose the size of the compartments in your drawer yourself. The size of a single…
Add a touch of warmth and charm to your garden with this adorable elderly lady gnome figurine ! Styled like a plump grandmother , she features a round, cheerful face , a soft, rounded body , and two long braided pigtails . Her tall…
Remix of my original model. Wanted something smaller, more palm-filling. That's what she said. Category: Sport & Outdoors
(English see below) UPDATE 26.05.2025: Auf Wunsch habe ich eine Version für 5 mm dicke Leisten eingefügt. (Nicht getestet, wenns Probleme gibt bitte kurz melden) Ich habe noch keinen Besteckeinsatz gefunden, der exakt in die Schubladen…
This is a model that was fully made on TinkerCad. Click here to go to my TinkerCad model. Easy print, no supports needed.
Took Huldas handle grips, modified a little inside. Made it fit to Ø33mm tube diameter. Printed with darkblue TPU, heated up the handles, heated up the steel tube of the wheel barrow, applied some dishwasher soap and hammered it down with…
Replacement Schuberth C3 Pro Motorcycle Helmet Sun Visor Slide. Printed with PETG. Please share your Make:) Like the freebie? Please Rate and share your Make 😎
If you want to sell printed copies of this toys subscribe in Patreon (link bellow) Support Me: https://www.patreon.com/la_calavera_3dprint https://thangs.com/designer/La%20calavera Along with the STL files you'll find the 3MF files for…
This is a simple remix of a crocodile with an articulated fish in its mouth. A great way to decorate your desk :-)
A cute bunny for the upcoming Easter holiday! Scalable to any size! Get them all!! Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Chubby Articulated Penguin A cute chubby flexi penguin is now available!! With the ability to print in multi color or single color. Print multiple penguins to optimize filament usage.
This is a remixed Chubby Croc intended to be used as a coin bank. The coins can be extracted easily by the user (child?) for counting the savings. The slot is sized for Euro coins. There are supported and unsupported versions available in…
Chubby frog remix to enable to be hung / used as a keyring
du kannst dir jede Farbe wählen und druck dir einen Griff aus und Klebe ihn an die Lade, ganz wie du willst. Vergiss nicht ein MAKE zu hinterlassen, danke Trenne Ablage und Schublade Ich habe mit 15 Infill Gyroid und 3 oben 3 unten und…
Puffy and simple in appearance models of a chubby bunny rabbit in two different poses. Both make a delightful spring/easter decorative piece or toy. Printing tips: Some supports are needed, a small amount for the underbellies and to…
Remix of a cute caterpillar to make the antennae safer. I printed with no support and two walls. Used lightning infill to give them a hollow sound.
Upgrade für den Anycubic Acrpro, ein Riser mit 6 Schubladen auf 4 Etagen. Man kann noch eine Flache Schublade auf die unterste Ebene stellen wenn man möchte, die passt da auch zufällig rein. Die breitenSchubladen sind in jeweils 3 Teilen…
English Version, German Below | Englische Version, Deutsche Version weiter unten This is a practical 3D model for owners of a Razer Naga Trinity mouse. It provides a compact drawer for two of the interchangeable side plates. Also included…
