Wyniki wyszukiwania: cla

Mantis Clamp

Very happy with this creation, it's a 35:1 print-in-place dual stage planetary gear system (sun 1 : ring 2). The really cool thing is that the rings won't shift without the inner gears being turned, so no back-driving ; the arms are…

Desk Mount Headphone Holder / Mount / Clamp

A remix of mistertech's headphone holder with a reversed cord holder. Works on desks up to 40mm thick.

Flexi Sloth - Hook Claws for Hanging!

>> UPDATED VERSION OF THE SLOTH AVAILABLE HERE << The Flexi sloth with hooked claws - hang it from a plant or a string! Or just let it sloth around, your choice. It's adorable both ways. The claws can be snapped into place. The face has…

Grabby the Claw - a quick calibration test for 3D printed action figures!

Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…

Desk Clamp (Modular)

A modular desk clamp. Was inspired by the flash contest to finally do this idea. I was constantly changing the layout of the room and finding, that I need to print “another headphone holder” etc. because I wanted it on the other desk or…

Lego Compatible Classic Minifig Complete

This model is compatible with the lego system.

Filament Quick Clamp V2

This is new version of my previous Filament Quick Clamp models. Features: Prevents filament spool from unraveling. Filament is easy to snap in place by a clever gripper mechanism. Clamp and gripper is spring loaded by a single internal…

Cable Clamps Clips

Quick clamp replacement or saving money the choice is yours. if any clamps/clips Designs to be made let me know I'm all ears. Best to print in PETG for Strength an Flexibility Screw holes are 4mm (cable clips are 3mm) 2mm thick for no…

A remix of the Zipper Slider Jig with clamping improvement

I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back

Screw Claw for Screwdriver and Bits

Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…

Meshy.ai Test. Classical Statue.

Playing with Paid version of MeshyAI HighPoly Mesh Output + post Texturing. Verdict. Slightly better mesh but messy texturing (seams are not clean). Displacement seems to be less predictable. Probably just need to play with it a bit more.…

Print in place Clothespin/Clamp

Dimensions (LxWxH) 70 x 30 x 10 mm (100% scale) Basic information Print in place clothespin. It's designed primarily for laundry, but you can use it for many other various purposes, such as sealing bags, holding stuff together, etc.. The…

Talking Claptrap (CL4P-TP)

CL4P-TP, better known as Claptrap from the game series Borderlands! ARTICLE & TUTORIAL: https://blog.prusaprinters.org/how-to-build-a-talking-robot-with-animated-leds_37072/ I modified the wonderful design by Chaos Core Tech to make it…

Clamp

Screw thread M14. Internal thread has a tolerance of -0.1 mm. The thread must first be screwed through several times to ensure that the screw moves well. I recommend printing a support in the internal thread. Print with 3 perimeters to…

Tarp Clamp

I chose PETG since with camping and rubbish tip runs they'll only see a couple of weeks direct sunshine a year, so they should be plenty UV stable enough for that. Choose ASA if you're using them outside more permanently for a…

Imperial II class Star Destroyer - 1:3000 scale

Here is my personal interpretation of the Star destroyer. I made this model to fit with my previous resurgent class star destroyer. Once finished this model is 53cm long. The model is designed in several parts to avoid to have support…

Brass knuckles (classic)

Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger

The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…

quick Paracord rope clamp 4mm & thimble

Precision ingenieur'ed paracord lock that does not require additional parts and prints easy and reliably. Will fit 4mm diameter paracords and is very compact in size. Obviously not suitable for safety relevant applications. Assembly…

PETG Carbon Fiber Prusament Clamp

The redesigned version of the original Prusament Clamp for PETG. This lighter version saves material but is still perfectly strong using PETG Carbon Fiber. The remix is designed by Josef Franc ( ropak ).

Table mount - extender - clamp

Table mount/extender/clamp Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋 Printing settings ⚙ Material: PETG / ABS / ASA Layer…

Star Wars Imperial I-class Star Destroyer

Link to improved version A replica of an Imperial I-class Star Destroyer as seen in A New Hope and Rogue One. Print instructions Scale is at 1:1,000. Unless you want a 1.6m long print, you should probably scale it down first. I printed…

Stackable-Corner Clamp-T,L,and,+ (Corner Clamp V1.0)

This Corner Clamp is a precision tool designed to hold corners securely in place while clamping, ensuring perfect corner, T, or + alignment for woodworking projects. Ideal for assembling frames, boxes, cabinets, and other structures, it…

Tweaked Headphone Holder Desk Clamp

I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…

Paracord thimble and rope clamp

Will fit 4mm (~1/8") diameter paracords. Eyelet diameter is 7mm (little over ¼"). Obviously not suitable for safety relevant applications. Changelog 2025-02-23 v4 added files for 0.4mm nozzle 2022-03-15 v3 complete redesign with smaller…

Snap-in Pipe Clamp – Zip Tie Lock – 20-120mm – 0.8-5.5in - LR Basics

There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…

Strong Arca Swiss Clamp

Those clamps can get quite expensive. Once you get yourself a tripod, steadycam, gimbal, and other things you want to mount your camera to quickly. Not to mention some may need proprietary mounting screws, release plates or other…

Grow Tent Pole Clamps For Wire Organization, GoPro Mounting, and More! ***Updated With 16mm & 22mm Clamps***

***Updated 11-7-2022 | Now Compatible With 15mm & 22mm Tent Poles | *** Added 22mm ID versions of all clamps to add compatibility with grow tents that utilize 22mm OD support poles. If you need a version of these clamps with a different…

Samsung Galaxy Watch 6 Classic 47mm Stand

A remix of "Galaxy Watch 5 Active Charging Stand" to fit the 47mm model of the Galaxy Watch 6 Classic. I printed it with 100% infill to give it some proper weight :)

Wall mount for Lego McLaren Formula 1 car

This is a wall mount for the Lego McLaren Formula 1 car. It's twisted to give an artistic pitch, roll and yaw to the car, making it look like it's flying out from the wall. Locks into place onto the underside of the lego car, and mounts…

Vekoma Classic Roller Coaster Car

Thanx to Tim ( https://www.myminifactory.com/object/3d-print-classic-roller-coaster-train-142420 ) and Don1975 ( https://www.thingiverse.com/thing:39229 ) for their good work. I changed nearly every part a little bit, so I post this here…

Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook

The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…

X-axis upgrade with linear rail, belt tensioner and bearing clamping - Prusa MK3 / MK3s / MK3s+

If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…

Wolverine claws for kids

My 6 year old wanted these for qite some time and there was not any nice model so i made him (pretty) safe pair that should not break easily. Should be printed with supports under claws, placed on the flat part. No post processing needed.…

2021 (First Version) MiSTer Multisystem classic gaming console 3D Printed enclosure design

Please note that a revised Version V5 (2022) of this enclosure is also available on Printables Here - MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design by Multisystem | Download free STL model | Printables.com…

Cutter and mould for a heart-shaped clay plate

The printing is relatively uncomplicated; I used some supports to make the print cleaner, but these aren't absolutely necessary. The clay should first be rolled out and cut using the cookie cutter. The cookie cutter is slightly larger…

Large Mantis Clamp

A clamp based on a planetary gear set that is useful as a mini-vise. I increased the overall size and modified the design of the jaws to eliminate the need for supports and increase clamping area.

Clay Roller

Hello, these are a few clay rollers ex , and a Tile roller I got inspired by a few pictures, ps : the pictures are not mine , I can make more types if any one is intrested ! Thank you

Submarine Class-LA, Click together.

Original needed supports all over. Cut into 4 individual parts that click together and the big parts can be printed with no support. Tail and tower will need structure. Easy to cut off though. Printing Tip: Print the front and back Hulls…

Charging Stand for Samsung Galaxy Watch 6 Classic 47

A fancy charging stand for the Samsung Galaxy Watch 6 Classic 47mm! It might work for other versions or watches as well, but I didn't test that! The diameter of the charger-hole is 29.5mm I added a piece of 1mm thick sticky foam where the…

Classic Teenage Mutant Ninja Turtles Logo

Drew up and created a 3D, multi-color, version of the classic 90s cartoon Teenage Mutant Ninja Turtles logo. Printed with Hatchbox Red, White, and Green and Prusament Galaxy Black PLA filaments. Drawn in Affinity Designer, imported as a…

MFT V Clamp

An accessories to clamp round part with clamp decicated to be used with Festool/Makita rail or with 19/20mm dog hole.

Claymore irrigation mine for gardeners

Hello, I have a claymore watering mine for gardeners. Fantastic model for watering plants. Just pour water inside and it will gradually hydrate your bouquet or plant! I used PLA/PETG Basic as the material yes need to use supports If you…

Classic Chess Set – Parametric Design (FreeCAD) - -ajedrez

Este es un juego de ajedrez completo para impresión 3D , diseñado desde cero en FreeCAD con un enfoque paramétrico , limpio y funcional. El proyecto incluye los archivos fuente originales de FreeCAD , lo que permite modificar fácilmente…

How to train your dragon Bookmark Strike class

Bookmark for How to train your dragon fans, it has the strike class logo on it which is the class Toothless is in

Micro Drip Irrigation Kit Hose Clamp Stakes

Tips Use a zip tie through the hole to further secure the tubing within the clamp (optional). Print with PETG for best performance in outdoor applications.

Lego 2023 McLaren Formula 1 F1 Car Display Stand (MMU/AMS Friendly)

A simple display stand for the Speed Champions Lego McLaren Formula 1 Race Car (#76919). MMU/AMS friendly but they are not required for the single-color version. F1 logo is optional with alternative model files provided! This model…

Baggage Claim: The Amazing Tea Bag Rolodex

UPDATE: Check out the updated model for improvements and broader compatibility! The Baggage Claim is a fully 3D printed tea bag rolodex that requires zero hardware. It should pressure fit any size tea bag in the list below. Make sure to…

Classic Dr. Pepper Sign 2 Color

Color order: White then Red. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down.…

Shure sm57/58 Microphone and Headphone Clamp Stand

Shure sm57/58 Microphone Desk Clamp Stand + Headphone holder. Don't forget to print the screw that is a separate file.

quick Paracord rope clamp 2mm

Changelog Paracordlock 2022-07-03 v2.1 increased holding force for cords with smooth surface 2022-07-02 v2.0 initial public release Tool 2022-07-02 v0.5 initial public release Paracordlock Will fit ø2mm/1.9mm diameter paracords. Obviously…

Pool Pole Clamp

After trying other similar designs, I found it hard to get the thread print clean. This design is done for a extension pole set where the two sections are 31.5 MM and 28.7 MM respectively. It should be scalable to other diameters. The…

The same CLAMP for 3 dimensions of yagi antenna elements and 2 dimensions of square boom.

Complete Yagi Antenna Clamps Collection — Universal, Dedicated & 6m Heavy-Duty (Boom 15 to 30 mm) A popular, highly versatile antenna clamp collection designed to fit multiple Yagi antenna configurations. Thank you to the ham radio…

MiSTer Multisystem V6x 2023 classic gaming console 3D Printed enclosure design

Update to the Multisystem FPGA console enclosure for 2023 - easier for print farm production, quicker using 0.6mm nozzles (recommended) the design is tuned for 0.6mm E3D V6 nozzles on a Prusa i3 MK3/3+/3S+ machine. For construction and…

classic cookie cutter ("Spitzbuben" or "Hildabrötchen")

just a very simple and classic cookie cutter design. You need to print the base and one or two of the top elements to make tasty cookies. Print instructions really easy to print. No speciall adjustmends needed. I used 3 perimeters and 10%…

Classical Train Set - Cookie Cutters

This is a classical themed cookie cutters set consisting of a steam locomotive, a stack wagon, a container wagon and a ballast wagon. Since so many cookie cutters end up in having huge cookies but in our familiy smaller sized cookies is…

Dewalt DWE7492 Scale indicator clamp

This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…

Bicycle gloves hanger clamp / Fahrradhandschuhaufhänger

Simple clip with which e.g. cycling gloves or other light textiles can be easily hung up. I use it to store my cycling gloves, balaclavas, etc. with the rest of my cycling clothes and hang them up to dry. Einfache Klammer, mit der z.B.…

Screen repair clamp

You can use these clamps when repairing for instance an iPad screen and you need to clamp the edges while the glue sets. I recommend using automatic support painting on the C part of the clamp and using organic supports. When printing in…

Schlüsselanhänger Name Claudia keychain

Ein Schlüsselanhänger mit dem Namen Claudia

Classic Clamp Fully Printed !

I have designed and created a classic clamp specifically intended for hobbyists, particularly those involved in activities like modeling and crafting. What sets this clamp apart is its unique construction and functionality, catering to…

Classic Horseshoes Game

Part of the Classic Games Collection Just the standard Horseshoes game without the metal parts. Requires at least 4 Horseshoes and 1 pole to play. There are many rule sets, including "official" rules.....but the most basic I know is: 4…

Classic Chess King

This is a beautiful classical style chess king designed with FreeCAD, with no compromise regarding supports. The original dimensions of the piece are 36 mm (≈ 1 27/64") diameter and 92 mm (≈3 5/8") height, but you can rescale it as…

X Stepper sleeve wire clamp

Clamp that retains X Stepper wire and sleeve. Eliminates bending action when Z travels up and Down. Print instructions Use 3mmx10mm screws with 3mm hex nuts. Requires large Zip tie to fasten to Motor.

Cyrillic letters for clay modeling (sorts, stamps)

These letters have height of 4mm on top of a 10x10x10mm cubic pedestal. The letters are meant to be used manually, imprinting something on a clay surface letter by letter. Font - Calibri Size - 5mm height for capital letters Nozzle -…

HarryPotter Coaster Ravenclaw

A simple yet elegant and fast print Ravenclaw coaster for your hot or cold beverages.

Strap Clamp Corners

Take standard clamping bands (1 inch wide), add 4 of the 3D printed corners, and you're ready to glue wooden boxes or other things that have 90 degree corners. The main advantage of this design over the purchased version is that the…

Mclaren P1 Wall Art

nice detailed MclarenP1 silhouette to decorate. You can adjust the size as you want in your slicer.

Targaryen Dragon Clasp/Button

A fully printable clasp based on the one worn by Daemon Targaryen (Matt Smith) in the upcoming Game of Thrones prequel House of the Dragon. Included are the left and right clasps with a snap fastener to hold them together and a smaller…

Gaggia Classic - Steam handle

Steam knob for Gaggia Classic pre-2015 model with 6 mm hole with flat side. It is a very tight fit, just push on hard! The flat side is internally reinforced.

Clay Tool - Angle and Arc Cutter

Most tools you can purchase are either too small or built more for pottery clay or cake decorations. This design as well as others in the collection are for bigger hands plasticene (non-drying) type clays. At this point, I call this a…

Nextruder nozzle wrench to fit IBNobodys heatblock clamp.

I noticed that the wrench with chamfers is very close to fitting IBnobodys heatblock clamp so i remoxed the STL to make

Locking Clamp for Tentacle SYNC E

This is an optimized model for printing the original Locking Clamp for your SYNC E mk1 & mk2 yourself. It fits perfectly with the Neutrik angled 3.5mm connectors. We have tested it with the Prusa MK4S printer and recommend the following…

Classical Passive Filament Tracker

🎯 Keep an eye on your filament — the smart, simple way! The Passive Filament Tracker is a purely mechanical tool that visually shows the estimated filament used and the remaining amount on your spool. No wires, no batteries — just mount…

Axial Ryft RBX10 - Full Clamshell Roof

By popular request (this time many people), I've created a full cover roof for the Axial Ryft RBX10. You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up. For…

Guide Rail for Bessey Clamps

This small part is for Bessey and simliar woodworking clamps. The guide rails are used to protect the clamps of wood glue. I use them with Stier clamps, should work with Bessey as well. I shortened the original (black in the photo) guide…

Height-adjustable clamping claws

The model is a clamping set for fastening workpieces for further processing on different surfaces. A set of clamps consists of three parts: 1. a block 2. one clamp 3. one screw To clamp the workpiece, the block must be placed on a flat…

Clarinet/Flute Microphone Clip for T.bone Ovid CC100 or DPA 4099

Clarinet/Flute Microphone Clip for DPA 4099 or T.bone Ovid CC100 from Thomann. Uses double-sided velcro for mounting.

Grippy Filament Clip Clamp

This is a variation on previous model Filament Quick Clamp : https://www.printables.com/model/506814-filament-quick-clamp A rubber band powered filament clamp-on to prevent the spool from unraveling This new model is different in the…

IKEA JANSJÖ Lamp LED clamp spotlight - complete Clip / Klemme

The otherwise very practical IKEA lamp, for clipping onto a shelf, has unfortunately broken. Both parts of the clamp broke after only a few years and the whole lamp could no longer be used. In FreeCAD I designed a replacement part for it,…

Ratcheting Clamp Lever - M4

“Ratcheting” is perhaps not exactly the correct term for this, but the design does allow for the clamp handle to be moved without moving the clamping screw. This is a simpler version of commercially available clamping levers. The cheapest…

Model Making Clamp

This is a clamp for use with rubber bands. There are a few ways it can be used. Also, you can use it with whatever size rubber band that you need.

D-sub Backshells, captive clamshell-type

I was unsatisfied with the backshells available for download, and I had none handy, and I figured it wouldn't be a tough build. These clamp together nicely and are locked together by the SHCS when assembled. They fit Tayda D-sub…

Mini clamp holder for Biltema pegboard

Holder for small clamps suitable for Biltema pegboards which have 4mm holes with a c/c distance of 12mm from each other.

Clamps for VHF/UHF ANTENNA PVC BOOM

2 différents clamps for VHF/UHF ANTENNA PVC BOOM. First fixed element clamp. second element tiltable at 90deg. The element comes into force in the clamp. The element clips onto the boom. See the video to remove it. 04mm for éléments and…

Lamp_Clamp paracord grow tent

If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This is the safest way to hang a lamp, a carbon filter or whatever u want into…

QYSEA FIFISH V6 Claw for Robotic Arm

More or less 1:1 model of claws for Fifish robotic arm. .OBJ file is here as well so we can modify them to get even more useful tools to use. After printing I recommend drilling the 4mm holes with a 4mm drill just to keep it a tight fit.…

Classic curves in the sun.

Dial Articulated Swiveling Mantis Clamp (Print-In-Place)

See it in action in the below video! Print Instructions: Supports required under for the ‘post’ portion of the clamp as well as the Qube500 mount points & post-hole. I recommend organic supports for this. I've place some special voids…

Mercedes Class B W246 on screen phone holder (Galaxy S21 Ultra)

I designed this support to hold my phone in my car because I couldn't find what I had in mind ;-) Fit the Mercedes Command Audio Screen (not touch screen). It is designed in two part with a dovetail for assembly. The frame can be equiped…

C-clamp - 100% printable - no support - optimized orientation

C-clamp - 100% printable - no support - optimized orientation Designed for high pressure: Optimized print orientation ensures maximum stability and superior clamping force. Choose between short and long rods for a standard setup or two…

Shimano I-Spec B bar clamp

I bought some shifters which use the I-Spec B mounting interface, but I don't have the accompanying brakes. Part of this was an experiment to see if 3DP plastic could repeatably stretch over the bar & still adequately clamp. This would…

Mclaren 720s Spyder Car Wall Art

Very nice and detailed model in Wall Art format of a Mclaren 720s Spyder.Size can be changed. I accept model suggestions

Electrical Cable (Romex/NM) Clamp/Mount

Clamp/mount for fastening a NM electrical cable (Romex cable) to stud. Countersunk for an ANSI #8 82deg screw. Fits a 10/2 or 12/2 (10 gauge; 2 wire (excluding ground); 12 gauge 2 wire). Slot width: ½"W x .25"deep

Santa Claus 5 color Refrigerator Magnet for MMU

I discovered a free-to-use Santa Claus clipart online and converted it into an SVG file using Adobe Illustrator. From there, I designed a multicolored 3D-printable model, specifically for use with a multicolor 3D printer. To assemble:…

Marker compass adapter: pen clamp

Have you ever had to draw a circle in pen but your compass had only a pencil tip? With this simple and small print you can screw to the compass colour pencils, pens, markers… Print it is shaped in a easy-to-print shape doesn't need…

Klammer für Kärcher Reinigungsrollen - Clamp for Kärcher cleaning rollers

Mit diesen Klammern können die Kärcher Reinigungsrollen des Hartbodenreinigers schneller gedrocknet werden With these clamps, the Kärcher cleaning rollers of the hard floor cleaner can be dried faster

wall clamp provides fixation for 35mm pipes or corrugated hoses for M5 Countersunk Screw

The wall clamp provides fixation for 35mm pipes or corrugated hoses. Designed with a 34.7mm clamping function and 11mm height. Hole for countersunk M5 Screw. Printed on my Prusa with: 0.3mm layer height, 50% infill 0.4mm nozzle.…

Santa Claus decoration figure christmas winter

This is a sweet little decoration figure of a santa, and is perfect as a give-away or a little gift for christmas. Thank you for your interest! Feel free to share your prints or print files with the community! Design by ejo, downloaded…

John McClane - Die Hard funko POP!

Print & acrylic draw