Liczymy pasujące modele…
I copied a lot of the design and SVGs from this , but went with engraved letters because I wanted to make sure they were easier to conceal Tinkercad link if you want to tweak: https://www.tinkercad.com/things/9ln6eyHvVsU 0.12 mm layer…
easily display cards and tokens to players during the night phase of the game.
This is a small clip on accessory designed to hold your death shrouds in an easy to reach place, rather than have to deal with them rattling around in the grim. It is designed to clip in the bottom right hand corner of the grim, but I've…
Designed to clip onto the top of the grim (but able to clip on any side you desire) this model holds the nighttime cards, to prevent them rattling around in the grim and ensures you know where they always are. The clip can be slightly…
I took some inspiration from others and printed my entire set of the game. It uses lots of skills. Inlaid magnets, leather work, and patience! Includes everything you need to print a fully functioning version of the game. Additional…
I got tired of having to open up multiple script boxes just to fish out the character tokens I needed for a custom script game. So I designed a “compact” character library where each character gets their own little box, including their…
"A corpse should be left well enough alone." Out of all the five bosses from the DLC, I think Lady Maria was the most challenging to sculpt. It's simply the level of detail in her clothing that did it. Unfortunately the last week for me…
Accessory token holder for the rectangular night cards for the social deduction game Blood on the Clocktower. PIP part printed in PLA at 0.2mm layer height, 0.4mm nozzle, 10% gyroid pattern infill on a Bambulabs X1C, printed with auto…
This design is based off Ben Finney's "Unofficial DIY Resources for Blood on the Clocktower", linked below. Be sure to adjust the backstop height to match your Grimoire tokens. I will update with a height adjusted version once I have…
This tray is sized slightly smaller than the original token holders because they are cardboard and have some varience in their size, but will hold all of the spare tokens that came with the kickstarter edition of the game including the…
You can see the use of the box: Lid can be printed using 3 colors, with manual change, or just the lid, then the text will still be visibel as an indentation. Designed just using Thinkercad and PrusaSlicer. Used my stock MK3S with…
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Back to the Future–inspired wall plaque featuring the Hill Valley clocktower,…
From the original model's page: These are token boxes for the game Blood on the Clocktower. The base game comes with 3 scripts and the travelers/fabled, and at the recent convention they amazingly gave all the attendees a copy of every…
This is a model for the grimoire and helper tokens for the game Blood on the Clocktower To get the character tokens, use this link: https://www.printables.com/model/211740-blood-on-the-clocktower-tokens You may add pauses while printing…
Note: from using this, we found that the weight of the token holders are too high and end up moving too much during the night phase of BotCT. So in its current form, it is not the most practical but I will be looking for better solution…
This is a small storage box designed to hold general components from the base game (Life/Death tokens, vote tokens, grimoire clips, ..) along with items from from BGExpansions' upgrade kit (mainly the erasable name labels ). Fits in the…
A 3D printable gnome integrated with a miniature clocktower, gears and pipes woven into his outfit. The tower merges with the base to ensure one solid, detailed model with no fragile moving parts. Model was tested in Orca Slicer for…
I designed these capsules to seamlessly integrate homemade tokens with the official ones, ensuring players can’t tell the difference when drawing from the bag. The capsules are simple to open and the tokens can be easily removed to add…
use bridgemode and CURA75 see the settingimage Have fun !! paint complete black and let it dry the white/gray corners looks very good drybrush some green
Container to organize and store Blood on the Clocktower tokens. Pockets hold 5 tokens each (official token width 1.5mm, pocket size 9mm; character tokens are 44.5mm wide and reminders are 25.5mm) Container has little dots on each side of…
Model designed for use in the social deduction game Blood on the Clocktower. A very simple gear motif with 15 slots for small LED candles with a diameter not exceeding 4 cm. The model is available in two versions for LED CANDLES: V1 –…
The clock tower of Graz is THE very prominent landmark that can be seen nearly from anywhere in the city since the 13th century (for more information check out Wikipedia or- even better- come and visit this beautiful place yourself). A…
Note: This is a remix of a design by “serenitynow” that I found on MakerWorld. The original can be found here: https://makerworld.com/en/models/768934-blood-on-the-clocktower-inlay-retail-version Description Due to my specific setup with…
Designed to be printed in three colors using a 2 extruder printer (I used a UMS5+) by pausing at the correct layer, swapping out filament so that the "Blood on the Clocktower" text is a different color than the box.
A token to track if a ghost has used their one vote yet or not. 3x2mm magnets can be press fit into the holes to allow the stub to be "ripped". I have yet to test print this one yet and it may not look good or work. If you decide to make…
Clocktower for Samsung Galaxy Watches with original magnetic charging cable (diameter 29.3mm, height 8mm). Simply print with supports on the long side and press the magnetic holder into the recess. 2025-01-29: added a version with…
Two boxes for Blood on the Clocktower grimoire. Smaller box can be used as holder for reminder cards. If you want hollow lids with infill pattern use slicer_project file for PrusaSlicer or “lid modifier models”. Diameter of magnets are…
Clock face from https://www.printables.com/model/670674-wall-clock/files
Hey, I just made life and vote tokens for playing Blood on the Clocktower. I took over the design of the clock and used a ghost to represent death; I'm pretty proud of the design and the symbolic. For the moment I haven't printed it, so I…
(Based on https://www.thingiverse.com/thing:6031069 ) Simple and useful addon for the game "Blood on the Clocktower". Very helpful if a spy is in play and users need to orient themselves in the grimoire. Compared to the original, I made a…
From the original model's page: These are token boxes for the game Blood on the Clocktower. The base game comes with 3 scripts and the travelers/fabled, and at the recent convention they amazingly gave all the attendees a copy of every…
I took some inspiration from others and printed my entire set of the game. It uses lots of skills. Inlaid magnets, leather work, and patience! Includes everything you need to print a fully functioning version of the game. Additional…
This is a model for the grimoire and helper tokens for the game Blood on the Clocktower To get the character tokens, use this link: https://www.printables.com/model/211740-blood-on-the-clocktower-tokens You may add pauses while printing…
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Back to the Future–inspired wall plaque featuring the Hill Valley clocktower,…
Note: from using this, we found that the weight of the token holders are too high and end up moving too much during the night phase of BotCT. So in its current form, it is not the most practical but I will be looking for better solution…
